Sun Joe SWJ699E-RM Bedienungsanleitung

Sun Joe Sägemaschine SWJ699E-RM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe SWJ699E-RM (24 Seiten) in der Kategorie Sägemaschine. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
THANKS FOR YOUR PURCHASE
OF A REMANUFACTURED PRODUCT.
snowjoe.com
To make sure you get the most out of
your
product, be sure to register online at
to enjoy full product support.
PASTE UPC LABEL HERE
A Division of Snow Joe
®, LLC Model SWJ699E-RM Form No. SJ-SWJ699E-RM-880E-V1
R
ELECTRIC CHAIN SAW
14-INCH | 9-AMP
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
© 2018 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC Model SWJ699E-RM Form No. SJ-SWJ699E-RM-880E-V1
R
ELECTRIC CHAIN SAW
14-INCH | 9-AMP
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
2
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all the instructions contained in this manual. Keep this
manual in a safe place, so that the information is available at
all times. If you give the equipment to another person, make
sure to provide these operating instructions. Basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury.
Notice the personal safety alert symbol m used in this
manual to draw your attention to a given along WARNING
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
Intended Use
This electric chain saw was designed and manufactured for
trimming and pruning tree limbs and branches and for cutting
smaller logs up to 10 in. (25 cm) thick. All of the wooden
objects intended to be cut with this chain saw should be no
thicker than the guide bar's maximum cutting capabilities.
Improper Use
Any other use diering from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Examples of improper use
include, but are not limited to:
• trimming hedges;
• carving;
• sectioning pallets, crates, and various packing materials;
• sectioning furniture or other materials with nails, screws, or
other metal components;
• butchering meat;
• using the machine to lift, move, or split objects;
• using the machine while fastened to xed supports.
Improper use of the machine will invalidate the warranty,
relieve the manufacturer from all liabilities. The user will
consequently be liable for all and any damage or injury to
himself/herself or others.
General Safety
mWARNING! When using electric yard tools, basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury, including the following:
1. Keep guards in placeProtective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Remove adjusting keys and wrenches – Check that
adjusting wrenches are removed from the saw before
turning it on.
3. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
4. Avoid dangerous conditions – Do not use this machine
in rainy, stormy, damp, or wet locations. Do not operate
the unit in gaseous or explosive atmospheres. Motors
in these units normally spark, and the sparks may ignite
fumes.
5. Do not use the chain saw in the rain.
6. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
7. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
8. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which it was not
intended.
9. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Wearing heavy-duty rubber gloves,
substantial non-skid footwear, and close-tting clothing is
recommended when working outdoors with power tools.
10. Wear protective hair coverings to contain long hair.
11. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
12. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out microscopic particles is recommended.
13. Do not overreach – Keep proper footing and balance
at all times.
14. Maintain tools with care – Keep tools sharp and clean
for the best and safest performance. Follow instructions
for lubricating and changing accessories.
3
15. Disconnect tool – Disconnect the chain saw from the
power supply when not in use, before servicing, when
transporting, or when changing the chain or other
accessories.
16. Reduce the risk of unintentional starting – Make sure
the switch is in the OFF position before plugging the tool
into a power source.
17. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
18. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts, and any other conditions that
may aect the tool's operation.
19. Never leave tool unattended while it is running – Turn
the power OFF by removing the power cord directly from
its socket. Do not leave the saw until the cutting bar
comes to a complete stop.
20. Avoid unintentional starting – Do not carry the chain saw
with your nger on the switch.
21. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
22. Stay alertWatch what you are doing. Use common
sense. Do not operate the chain saw when you are tired.
23. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
Chain Saw Use + Care
Save all warnings and instructions for future reference. The
term “power tool” in the warnings refers to your electric chain
saw.
mWARNING! Turn o the power switch and disconnect
the power source before adjusting, inspecting, servicing
or cleaning the power tool, when changing accessories, or
when any other dangerous conditions present themselves.
All maintenance tasks should be performed after the power
tool's rotating parts have stopped completely. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
1. Do not force the power tool. Use the correct power tool
for your application. The correct power tool will perform
better with less likelihood of personal or mechanical
damage if it is used at the rate for which it was designed.
2. Do not use the power tool if the switch does not turn it on
and o. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
3. Disconnect the unit from its power source before making
any adjustments, changing accessories, or storing the
power tool. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
4. Store idle power tools indoors in a dry, locked place
out of the reach of children. Do not allow anyone who is
unfamiliar with the power tool or these instructions access
to the machine. Power tools are dangerous in the hands of
untrained users.
5. Maintain power tools with care to ensure safe operation
and optimal performance. Keep handles dry, clean, and
free from oil and grease. Check for misalignment or
obstruction of moving parts, breakage of parts, and any
other condition that may aect the power tool’s operation.
If damage is found, have the power tool repaired before
use. Many accidents are caused by poorly maintained
power tools.
6. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to jam
and are easier to control.
7. Use the power tool and accessories in accordance with
these instructions, and be sure to take into account the
working conditions and the work to be performed. Using
the power tool for operations other than those intended
could result in a hazardous situation.
8. Moving parts presents risks. Keep your face, hair, clothing,
hands, and feet away from all moving parts. All guards
and safety attachments must be installed properly before
using the power tool. Shut o and disconnect the power
supply before touching any parts other than the handles
and the switch.


Produktspezifikationen

Marke: Sun Joe
Kategorie: Sägemaschine
Modell: SWJ699E-RM

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sun Joe SWJ699E-RM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Sägemaschine Sun Joe

Bedienungsanleitung Sägemaschine

Neueste Bedienungsanleitung für -Kategorien-