Sun Joe SJ-WBS70 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe SJ-WBS70 (24 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
Original instructions.
© 2022 Snow Joe, LLC. All rights reserved. SAVE THESE INSTRUCTIONS
A Division of Snow Joe, LLC ModelSJ-WBS70 Form No. SJ - SJ-WBS70 - 880E - M
R
OPERATOR’S MANUAL
1
EN
70-LB MULTI-PURPOSE
WALK-BEHIND SPREADER
ADJUSTABLE SPREAD CONTROL
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may result
in injury.
General Safety
m
WARNING!
This product is not intended for use by
children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from using
it safely. Children should be supervised to ensure that they do
not play near, stand on or climb in the spreader.
Before using your spreader, please check it carefully for any
defects. If you find any, do not use it. Instead, contact your
authorized Snow Joe® + Sun Joe® dealer or call the SnowJoe®
+ SunJoe® customer service center at 1‑866‑SNOWJOE
(1‑866‑766‑9563).
m
WARNING!
When using the spreader, basic safety
precautions should always be followed to reduce the risk of
personal injury. These include:
Stay alertWatch what you are doing. Use common
sense. Do not operate the spreader when you are tired or
under the influence of drugs, alcohol, or other medication.
Usage – Do not use this product for any job except for
what it is intended for. Do not carry passengers with the
spreader. Never tow it with a motorized vehicle.
Materials The spreader is designed to spread fertilizer,
grass seeds and ice melt. Do not use with powders,
manure, top soil, gravel or mulch.
Weight limit – Do not exceed the weight limit of 70lbs
(32kg).
Wind – Do not use the spreader on windy days when
spreading grass seeds or herbicides.
Load/Unload – Always use caution when loading and
unloading the spreader.
Moving parts – Keep hands and feet away from moving
parts while using the product.
Personal protective equipment – Always wear protective
footwear when using the product.
Work Area Safety
Work area – Always inspect the area where the machine is
to be used and operate it in a well‑lit environment.
Incline – Be careful when using the spreader on an incline,
as it may tip over.
Avoid dangerous environments – Do not use the product
close to creeks, ditches, large holes and public highways.
Maintenance + Storage
m
WARNING!
Do not use detergents, acids, alkaline
solutions, bleaches or solvents such as acetone to clean your
spreader. These substances may damage the plastic parts of the
machine.
Inspect before use – To ensure the spreader is in good
working condition, visually inspect for any loose fasteners
or worn, missing or damaged parts.
Replacement parts – When servicing, use only identical
replacement parts. Replace or repair damaged parts
immediately. Contact the SnowJoe® + SunJoe® customer
service center at 1‑866‑SNOWJOE (1‑866‑766‑9563) for
assistance.
2
Know Your 70-lb Multi-Purpose Walk-Behind Spreader
Read the owner’s manual and safety instructions carefully before operating the spreader. Compare the illustration below to the
product in order to become familiar with the location of the various controls and adjustments. Save this manual for future reference.
Technical Data
Hopper Volume 0.92 ft ................................................................ 3 (26 L)
Max Load Capacity 70 lbs (31.8 kg) .....................................................
Max Coverage Width ...............................................10 12ft (3 3.7m)
Feed Control ..............Closed | Low | Medium | High | Fully Opened
Multi‑Use ....................................... Fertilizer | Grass Seeds | Ice Melt
Net Weight 23.5 lbs (10.7 kg) .................................................................
1. Cover
2. Handle
3. Control lever
4. Hopper
5. Left handle support
6. Control rod
7. Feed plate lever
8. Right handle support
9. Axle
10. Gearbox
11. Stand
12. Wheel
1
2 3
4
5 86 7
10 9111314 1215
13. Impeller
14. Frame
15. Hopper screen
3
Unpacking
Carton Contents
Spreader
Handle
Handle support (x2)
Control rod
Stand
Hopper screen
Cover
M6x45 carriage bolt (x2)
M6x40 carriage bolt (x6)
M6x16 hex bolt (x2)
Curved washer (x8)
Nylon washer (x2)
M6 lock nut (x10)
M10/M13 wrench
M10/M14 wrench
Manual with registration card
1. Carefully remove the spreader and check to see that all of
the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Instead,
please call the SnowJoe® + SunJoe® customer service
center at 1‑866‑SNOWJOE (1‑866‑766‑9563).
NOTE: Do not discard the shipping carton and packaging
materials until you are ready to use the spreader. The
packaging is made of recyclable materials. Properly dispose
of these materials in accordance with local regulations or
save the packaging for longterm product storage.
IMPORTANT! The equipment and packaging materials are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
Use the two provided wrenches to tighten the nuts and bolts.
1. Turn the spreader upside down.
2. Install the stand onto the frame of the spreader using two
sets of M6x40 carriage bolts, curved washers and lock nuts
as shown (Fig. 1).
3. Install one of the handle supports onto the frame of the
spreader using two sets of M6x40 carriage bolts, curved
washers and lock nuts. Do the same for the other side
(Fig 2).
NOTE: Do not tighten the lock nuts yet.
4. Turn the spreader right side up.
5. Slide the end of the handle between the two handle
supports and fix it in place using two sets of M6x45
carriage bolts, curved washers and lock nuts (Fig. 3).
Fig. 1
Stand
M6x40
carriage
bolt
Curved
washer
Lock nut
Fig. 2
Handle
support
Curved
washer
Lock nut M6x40
carriage bolt
Fig. 3
Handle
Curved washer
Lock nut
M6x45
carriage bolt


Produktspezifikationen

Marke: Sun Joe
Kategorie: Nicht kategorisiert
Modell: SJ-WBS70

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sun Joe SJ-WBS70 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Sun Joe

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-