Sun Joe 24V-DD-LTE-RED-RM Bedienungsanleitung
Sun Joe
Bohrmaschine
24V-DD-LTE-RED-RM
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe 24V-DD-LTE-RED-RM (20 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
Model 24V-DD-LTE-RM Form No. SJ-24V-DD-LTE-RM-880E-M-V1
CORDLESS DRILL/DRIVER
24-VOLT MAX* | 2.0 Ah | TOOL CASE
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions.
1
SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
CORDLESS DRILL/DRIVER
24-VOLT MAX* | 2.0 Ah | TOOL CASE
Model 24V-DD-LTE-RM Form No. SJ-24V-DD-LTE-RM-880E-M-V1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
mWARNING! When using the drill/driver basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury. These include:
Work Area Safety
1. Keep work area clean and well-lit – Cluttered,
dark areas invite accidents.
2. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area.
3. Do not operate power tools in explosive atmospheres
– Such as in the presence of ammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
Personal Safety
1. Stay alert – Watch what you are doing. Use common
sense. Do not operate the drill/driver when you are tired,
or under the inuence of alcohol or drugs.
2. Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid unintentional starting – Do not carry the drill/driver
with your nger on the trigger. Make sure the switch is o
before connecting the drill/driver to power source.
4. Do not overreach – Keep proper footing and balance at
all times. Proper footing and balance enable better control
of the cordless drill/driver in unexpected situations.
5. Use personal protective equipment – Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
6. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. – Use of dust collection
can reduce dust-related hazards.
7. Do not use on a ladder or unstable support –
Stable footing on a solid surface enables better control of
the power tool in unexpected situations.
Tool Use and Care
1. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
2. Donotusedrill/driverifswitchdoesnotturnonoro
– The drill/driver that cannot be controlled with the switch
is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or
battery pack from the drill/driver before making any
adjustments, changing accessories, or storing the
drill/driver – Such preventive safety measures reduce risk
of starting the power tool accidentally.
4. Store idle drill/driver out of reach of children or other
untrained persons – Drill/driver is dangerous in the hands
of untrained users.
5. Maintain cordless drill/driver – Check for misalignment
or binding of moving parts, breakage of parts, and any
other condition that may aect the drill/driver's operation.
If damaged, have the drill/driver serviced before using.
Many accidents are caused by poorly maintained tools.
6. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed – Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
Battery Tool Use and Care
1. Rechargeonlywiththechargerspeciedbythe
manufacturer – A charger that is suitable for one type
of battery pack may create a risk of re when used with
another battery pack.
2. Charge internal battery at ambient temperatures
between 50ºF – 104ºF (10ºC – 40ºF).
3. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs,ushwithwater.Ifliquidcontactseyes,
seek medical help – Liquid ejected from the battery may
cause irritation or burns.
2
4. Usepowertoolsonlywithspecicallydesignated
battery packs – Use of any other battery packs may
create a risk of injury and re.
5. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another – Shorting the
battery terminals together may cause burns or a re.
Service
1. If your power tool requires service, contact an
authorized Snow Joe® + Sun Joe® dealer or call the
Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563) – Only identical
replacement parts should be utilized for repairs. This will
ensure that the safety of the power tool is maintained.
2. If the battery charger cable is damaged, it must be
immediately replaced to avoid a hazard – Contact
the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
Safety Rules for Cordless
Drill/Driver
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring –
Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
2. Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as well
asthespecicpotentialhazardsrelatedtothispower
tool – Following this rule will reduce the risk of electric
shock, re, or serious injury.
3. Make sure approved eye protection is being worn
and properly adjusted and secured at all times the
drill/driver is being used – There is a possibility that
small pieces of metal could shear o from over-tightened
screws while using the tool.
4. Protect your lungs. Wear a face or dust mask if the
operation is dusty – Following this rule will reduce the
risk of serious personal injury.
5. Protect your hearing. Wear hearing protection during
extended periods of operation – Following this rule will
reduce the risk of serious personal injury.
6. Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories – Following this rule will reduce the risk of
electric shock, re, or serious personal injury.
7. Donotplacebatterytoolsortheirbatteriesnearreor
heat – This will reduce the risk of explosion and possibly
injury.
8. Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow – A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
9. Batteries can explode in the presence of a source
of ignition, such as a pilot light – To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open ame. An exploded battery can
propel debris and chemicals. If exposed, ush with water
immediately.
10. Do not charge battery tool in a damp or wet location –
Following this rule will reduce the risk of electric shock.
Battery + Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
IMPORTANT! Analyses conrm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
mWARNING! Use only approved replacement batteries;
other batteries may damage the cordless drill/driver and cause
it to malfunction, which can lead to serious personal injury.
mCAUTION! To reduce the risk of injury, charge the
iON+ 24V lithium-ion battery pack only in its designated
iON+ 24V lithium-ion charger. Other types of chargers present
risk of re, personal injury and damage. Do not wire a battery
pack to a power supply plug or car cigarette lighter. Such
misuse will permanently disable or damage the battery pack.
• Avoid dangerous environments – Do not charge the
battery pack in rain, snow or in damp or wet locations.
Do not use the battery pack or charger in the presence of
explosive atmospheres (gaseous fumes, dust or ammable
materials) because sparks may be generated when inserting
or removing the battery pack, which could lead to a re.
• Charge in a well-ventilated area – Do not block the
charger vents. Keep them clear to allow for proper
ventilation. Do not allow smoking or open ames near a
charging battery pack. Vented gases may explode.
NOTE: The safe temperature range for the battery is
41°F – 105ºF (5°C – 40.5°C). Do not charge the battery
outside in freezing weather; charge it at room temperature.
Produktspezifikationen
| Marke: | Sun Joe |
| Kategorie: | Bohrmaschine |
| Modell: | 24V-DD-LTE-RED-RM |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sun Joe 24V-DD-LTE-RED-RM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bohrmaschine Sun Joe
23 Oktober 2022
Bedienungsanleitung Bohrmaschine
- Bohrmaschine Panasonic
- Bohrmaschine Cotech
- Bohrmaschine Makita
- Bohrmaschine Bosch
- Bohrmaschine Flex
- Bohrmaschine Parkside
- Bohrmaschine Vonroc
- Bohrmaschine AEG
- Bohrmaschine Velleman
- Bohrmaschine IKEA
- Bohrmaschine Black And Decker
- Bohrmaschine Cocraft
- Bohrmaschine FERM
- Bohrmaschine Ryobi
- Bohrmaschine Skil
- Bohrmaschine Trotec
- Bohrmaschine Baier
- Bohrmaschine Carat
- Bohrmaschine Hilti
- Bohrmaschine Sparky
- Bohrmaschine DeWalt
- Bohrmaschine Einhell
- Bohrmaschine Elu
- Bohrmaschine Festool
- Bohrmaschine Worx
- Bohrmaschine Tacklife
- Bohrmaschine Hikoki
- Bohrmaschine Hitachi
- Bohrmaschine Hazet
- Bohrmaschine Kinzo
- Bohrmaschine Kress
- Bohrmaschine Metabo
- Bohrmaschine Stanley
- Bohrmaschine Güde
- Bohrmaschine Power Craft
- Bohrmaschine Workzone
- Bohrmaschine Meec Tools
- Bohrmaschine Dremel
- Bohrmaschine Fieldmann
- Bohrmaschine Proxxon
- Bohrmaschine Berner
- Bohrmaschine Westfalia
- Bohrmaschine Stihl
- Bohrmaschine Dedra
- Bohrmaschine DURO
- Bohrmaschine Graphite
- Bohrmaschine Pattfield
- Bohrmaschine Silverline
- Bohrmaschine Holzmann
- Bohrmaschine Sthor
- Bohrmaschine Herkules
- Bohrmaschine Robust
- Bohrmaschine Zipper
- Bohrmaschine Yato
- Bohrmaschine Baumr-AG
- Bohrmaschine Genesis
- Bohrmaschine Delta
- Bohrmaschine Batavia
- Bohrmaschine Bavaria
- Bohrmaschine Milwaukee
- Bohrmaschine Narex
- Bohrmaschine Toolcraft
- Bohrmaschine Fein
- Bohrmaschine Gardena
- Bohrmaschine Craftsman
- Bohrmaschine Defort
- Bohrmaschine Powerplus
- Bohrmaschine Alpha Tools
- Bohrmaschine Ozito
- Bohrmaschine Ridgid
- Bohrmaschine Porter-Cable
- Bohrmaschine Guede
- Bohrmaschine Felisatti
- Bohrmaschine Gamma
- Bohrmaschine Global
- Bohrmaschine Lux Tools
- Bohrmaschine Tanaka
- Bohrmaschine Wolfcraft
- Bohrmaschine Meister Craft
- Bohrmaschine Truper
- Bohrmaschine Kreg
- Bohrmaschine Einhell Bavaria
- Bohrmaschine Prowork
- Bohrmaschine Bullcraft
- Bohrmaschine Tryton
- Bohrmaschine Ergotools Pattfield
- Bohrmaschine THUN
- Bohrmaschine Bavaria By Einhell
Neueste Bedienungsanleitung für -Kategorien-
11 August 2024
9 August 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
24 Juni 2024