Strong SRT 8010 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Strong SRT 8010 (23 Seiten) in der Kategorie Satellitenempfänger. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/23
Digital Terrestrial
Receiver SRT 8010
User Manual
Picture similar
PART 1 • English
1
English
TABLE OF CONTENTS
1.0 INTRODUCTION 2
1.1 Safety Instructions 2
1.2 Storage 2
1.3 Equipment Set-up 3
1.4 Features & Accessories 3
2.0 YOUR RECEIVER 4
2.1 Front panel 4
2.2 Rear panel 5
2.3 Remote control 6
3.0 CONNECTION 7
3.1 Connecting to terrestrial antenna. 7
3.2 Connecting to TV set. 7
3.3 Connecting to digital audio amplifier 8
3.4 Connecting of external USB memory device 8
4.0 FIRST TIME INSTALLATION 8
4.1 Language select 8
4.2 Terrestrial settings 8
4.3 Preferences 9
4.4 Adjust antenna 9
4.5 Channel setup 9
5.0 MAIN MENU 10
5.1 Channel organiser 10
5.2 Installation 12
5.3 Preferences 14
5.4 Setup 15
6.0 DAILY OPERATIONS 16
6.1 Electronic Program Guide (EPG) 16
6.2 Channel information 17
6.3 Channel list and view mode 17
A.1 TROUBLE SHOOTING 18
A.2 SPECIFICATION 19
* €0.12/Min. from Austrian wired line
* €0.14/Min. from German wired line
per February 2008
PART 1 • English
2
1.0 INTRODUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
n In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a
surface which might obstruct the ventilation slots
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
n To direct sunlight or near any other equipment that generates heat; to rain or intense moisture;
to intense vibration and to any shock which may cause permanent damage to your receiver or to
any magnetic objects, such as loudspeakers, transformers, etc
n Do not use a damaged power cord. It may cause a fire or an electrical shock. Do not touch a
power cord with wet hands. It may cause an electric shock
n Never open the cover. It is dangerous to touch the inside of the receiver due to high voltage currents
and possible electrical hazards. Your warranty will be void if the receiver has been opened
n When the receiver is not used for a long period of time, you should unplug the power cord from
the wall socket
n Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean
your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, only after
disconnecting from the mains voltage supply. Make sure no foreign objects fall through the
ventilation slots because this could cause fire or an electric shock
n Do not place any objects on top of the receiver because this might prevent proper cooling of the
components inside
SAFETY PRECAUTIONS
n Do not open the receiver cover, as you will be exposed to a shock hazard. It will also void your
warranty. Refer all maintenance or servicing to suitably qualified personnel
n When you are connecting the cables, be sure that the receiver is disconnected from the mains
supply voltage. Wait a few seconds after switching off the receiver before you move the receiver
or disconnect any equipment
n It is a necessity that you only use an approved extension and compatible wiring that is suitable for
the electrical power consumption of the installed equipment. Please ensure that the electrical power
supply corresponds with the voltage on the electrical identification plate at the back of the receiver
If the receiver does not operate normally even after strictly following the instructions in this user manual,
it is recommended to consult your dealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against
electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep the
packaging away from children. When transporting the receiver from one place to another or if you are
returning it under warranty make sure to repack the receiver in its original packaging with its accessories.
Failing to comply with such packaging procedures could void your warranty.


Produktspezifikationen

Marke: Strong
Kategorie: Satellitenempfänger
Modell: SRT 8010

Brauchst du Hilfe?

Wenn Sie Hilfe mit Strong SRT 8010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Satellitenempfänger Strong

Bedienungsanleitung Satellitenempfänger

Neueste Bedienungsanleitung für -Kategorien-