Stinger SR-GM14H Bedienungsanleitung

Stinger Autoradio SR-GM14H

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Stinger SR-GM14H (54 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/54
Stinger HEIGH10 Radio Replacement Kit
for select 2014-2019 Silverado/Sierra Truck
SR-GM14H
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
P ifi A C ti
Page 1
Rev: V1
Date: 030121
®
®
Introduction and Features
The SR-GM14H is a complete radio replacement kit for the installation of the Stinger HEIGH10 ® modular radio in Chevrolet
Silverado and GMC Sierra trucks. All modules, cables and adapters are included to retain important features of the factory system,
including: OnStar, front and rear park assist, warning chimes, factory reverse camera, steering wheel-mounted radio controls and
AM/FM reception. Plug & Play wiring harnesses allow for quick and easy installation without the need to cut or splice any wiring.
The display mounting panel allows ush mounting the 10 inch display without modifying/cutting any part of the vehicle’s sub-dash.
Important Notes
Recommended Tools
We recommend reading this manual thoroughly to familiarize yourself
with the entire process prior to beginning the installation.
1. HEIGH10 Display Mounting Panel
2. Dual USB Extension (SSUSB2)
3. AM / FM Antenna Adapter (BAA22)
4. Satellite Antenna Adapter (SAT-01)
5. Main Harness (SR-GM14H-HAR-A)
6. Vehicle Side Harness B (SR-GM14H-HAR-B)
7. Vehicle Side Harness C (SR-GM14H-HAR-C)
8. Radio Replacement Interface (RP5-GM51)
9. Steering Wheel Control Harness (GM5LIN-SW-HAR)
10. Factory Rear Camera Adapter (CAM-GM51)
11. IOB Display Harness (GM5CAM-DIS-HAR)
12. Chime Module (CMX)
13. Dierential Video Adapter (RPA-VA1)
Included Components
1
4
6
10
8
5
211
3
7
9
12
13
1. Does not retain the following factory features:
2. Not compatible with vehicles equipped with Bose amplied audio system.
3. Please make your vehicle settings selections before removing the factory radio for optimal installation time. Once the radio
has been removed, the vehicle settings which are normally selected through the factory radio can be accessed and changed
by downloading and installing the PAC Vehicle Settings program from http://www.pac-audio.com/rmware
4. The Voice button can be set to activate the factory OnStar function when pressed for longer than 1.5 seconds or given
the ability to control the aftermarket radio. This option can be found in the PAC Vehicle Settings program mentioned above in
note three. The default setting for this button is to control the factory OnStar. If this button is set to control the aftermarket radio,
OnStar can still be accessed by using the mirror controls.
● Factory satellite radio
● Rear seat entertainment system (RSE)
● Steering wheel control backlighting
● Factory USB Ports
Plastic Panel Tool
7mm Socket
10mm Socket
Pick Tool
Wire Feeder
Ratchet
Torx T15 Screwdriver
Small Flat-blade Screwdriver
NOTE: Along with the SR-GM14H components,
additional hardware and wire harnesses from the
HEIGH10 (UN1810) kit will also be used in the
installation.
Stinger HEIGH10 Radio Replacement Kit
for select 2014-2019 Silverado/Sierra Truck
SR-GM14H
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
P ifi A C ti
Page 2
Rev: V1
Date: 030121
®
®
GPS
UN1810
USB1 USB2
STINGER
BLACKGRAY10PIN6PIN
24PIN 16PINGPS AM/FM
ANT.
Stinger
Connection
Main Harness
Connection Connections shown are
all required for full
functionality of the kit
and radio. If adding
additional components,
additional connections
will be needed.
Connects to
SXV300 Satellite
Radio Tuner
(sold separately)
REVERSE CAM
A/V IN
RPA-VA1
REVERSE CAM
AUX
16PIN RADIO
16PIN RADIO
6PIN RADIO
SWI
CAM GM51 INPUT
SWC INPUT
OR
SR-GM14H-HAR-B
SR-GM14H-HAR-A
SR-GM14H-HAR-B
CAM-GM51-HAR
GM5LIN-SW-HAR
CMX CHIME
RP5-GM51
Wiring Overview
Stinger HEIGH10 Radio Replacement Kit
for select 2014-2019 Silverado/Sierra Truck
SR-GM14H
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
P ifi A C ti
Page 3
Rev: V1
Date: 030121
®
®
Before starting, determine the vehicle’s factory audio system by
referencing the Service Parts Identication sticker inside the
upper glove box.
The installations are very similar for each type of factory audio
system, but there are dierences referenced throughout this guide.
Note: The installation shown in this guide is IO5 with factory
rear camera and steering wheel controls.
One of these RPO codes will be listed:
IO3, IO4, IO5, IO6 or IOB
Step 3Step 2
Step 1
Section 1: Disassembly
Part One: Center Dash Disassembly
If equipped, remove the two
7mm screws from the CD/DVD
mechanism, remove and unplug.
(This plug will not be reconnected).
Remove the four 7mm screws
securing the radio display/climate
control panel. Pull outward to
release the retaining clips.
Remove all connectors from the
back of the panel.
Remove the radio display/climate
control trim panel using a plastic
trim tool to release the retaining
clips. Unplug any wire harnesses
from the back of the trim panel, if
equipped.
This installation manual will cover the necessary order of procedures to complete the installation
eciently and to avoid redoing any steps. The order will be as follows; Disassembly, In-Vehicle Harness
Connections and Preparation, Interface and Main Harness Connections, Display Mounting Panel
Preparation, Radio Module Preparation and Radio Unit Installation.
The installation steps shown are all required for full functionality of the radio. If adding additional
components; cameras, ampliers, satellite radio, etc., additional steps and harnesses will be needed.
Factory Radio Code


Produktspezifikationen

Marke: Stinger
Kategorie: Autoradio
Modell: SR-GM14H

Brauchst du Hilfe?

Wenn Sie Hilfe mit Stinger SR-GM14H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Autoradio Stinger

Bedienungsanleitung Autoradio

Neueste Bedienungsanleitung für -Kategorien-