Steinberg 4Knob Rain Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Steinberg 4Knob Rain (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
4Knob Rain Manual
The 4Knob Rain is the third release of SampleTekk’s new and approved approach to sampled pianos.
Its four sounds and 88 presets provide you with a fast way of getting the sound you want for your
production. The four sounds and all presets in 4Knob Rain are produced by SampleTekk’s Grammy
winner and several times Grammy nominee, Niklas Flyckt. During production several exclusive,
vintage and very sought-after hardware was used, such as:
• Fairman TMEQ
• RCA BA-25A
• MXR Doubler
• Roland Dimension D
For the Reverb channel HALion’s built in REVerence is used, but with SampleTekk’s custom made
impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some
of the impulses consists of a combination of several reverb types.
The Interface
The four main controls are where you set the blend. You can also mute and solo each sound.
Tip: When muting the sound, those samples are not triggered, so if you don’t use a particular sound,
rather than just pulling down the volume to zero, press the mute-button.
•Direct – The original piano signal
•Attitude
•Modulation
•Reverb
This is what you will see if you click the “Extended” button in the upper right corner of the control
panel:
From left to right:
•HB Volume — sets the volume of the hammerback sound (this is when the mechanics on the
piano return after releasing a key)
•Pedal Volume — sets the volume of the sustain pedal being pressed and released
•Sensitivity — turn clockwise to emphasises the higher velocities, counterclockwise for a
more mellow playing. This control is neutral when in 12 o’clock position
•Pre Delay — sets the pre delay of the reverb channel
•Size — sets the size of the reverb
•Time — sets the time of the reverb
•Ambience — sets the amount of room acoustic
•R — Turn on or off the Repedaling function. With this on, you can repeat sustain notes by
pressing down the sustain pedal directly after you have released it. In some occasions, you
might want to turn this off for a tighter sound


Produktspezifikationen

Marke: Steinberg
Kategorie: Nicht kategorisiert
Modell: 4Knob Rain

Brauchst du Hilfe?

Wenn Sie Hilfe mit Steinberg 4Knob Rain benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Steinberg

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-