StarTech.com POEEXT1GAT Bedienungsanleitung
StarTech.com
WLAN-Repeater
POEEXT1GAT
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für StarTech.com POEEXT1GAT (2 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Manual Revision: 02/25/2015
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x Gigabit Power over Ethernet Extender
• 1x Instruction Manual
System Requirements
• RJ45 terminated CAT5 or higher Ethernet cabling (“Solid” UTP cable
recommended)
• 10/100/1000 Mbps compatible Power over Ethernet network and/or
devices (PoE/PoE+)
• PoE devices must comply with IEEE 802.3at or 802.3af standards
Note: Total extension distances can often be shorter due to power
delivery voltage-drop on the connected cables. Maximum distances can
vary based on the quality of the UTP cables and the environment.
Product Overview
Input Side
Output Side
POEEXT1GAT
Gigabit Power over Ethernet Extender 802.3at / 802.3af - 330ft (100m)
LEDs
10/100/1000
PoE+ RJ45
Input Port
10/100/1000
PoE+ RJ45
Output Port
LED Indicators
LED Indication
PoE IN (Green)
Solid: Indicates that the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power (PSE is
connected)
Port Function
IN Port (Input)
Connect the PoE IN port from a
802.3at / 802.3af Power Sourcing
Equipment (PSE) device through CAT5
or higher Ethernet cabling:
• PoE injector
• PoE injector hub
• PoE switch
• Another POEEXT1GAT in a daisy
chain conguration
OUT Port (Output)
Connect the PoE OUT port to a 802.3at
/ 802.3af PoE powered device (PD)
through CAT5 or higher Ethernet
cabling:
• PoE camera
• PoE wireless access point
• PoE splitter
• Another POEEXT1GAT in a daisy
chain conguration
Installation
The PoE Extender supports 10Mbps, 100Mbps and 1000Mbps network
speeds and will automatically detect the speed of the incoming
connection.
Before installation, check your network infrastructure. If there are any
IEEE 802.3at / 802.3af devices that require power, the PoE Extender
can provide power and data Ethernet connectivity conveniently, and
easily.
The PoE Extender should be installed between the PSE (Power Source
Equipment) and the PD (Powered Device). It is powered by PSE and
forwards the Ethernet data and remaining PoE power to the PD.
The PoE extender does not require an external power supply and
will inject power to the PDs without aecting data transmission
throughput.
Port Connections
There are two RJ45 ports on the PoE Extender. The “IN” port functions
as “PoE (Data and Power) input” and the “OUT” port functions as “PoE
(Data and Power) output”.
LNK/ACT (Green)
Solid: Indicates that a port link is
established (PSE link is detected)
Blinking: Indicates that the PoE
Extender is actively sending or
receiving data over the IN port
(activity)
PoE OUT (Green)
Solid: Indicates that the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power (PD is
connected)
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (A)/NMB-3(A)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Multiple Unit Installation
The PoE Extender supports multiple units in a daisy chain
conguration. They can be connected in series to extend power and
Ethernet data connectivity to your remote PoE powered devices at
longer distances.
1. Using RJ45 cable, connect the “OUT” port on the rst PoE Extender
unit to the “IN” port on the second PoE Extender unit.
2. The “PoE OUT” LED on the rst PoE Extender unit should light up
solid to show it is providing power to the second PoE Extender unit.
3. The “PoE IN” LED on the second PoE Extender unit should also
light up solid to show it is receiving power from the rst PoE
Extender unit.
4. Using RJ45 cable, connect your remote PoE powered device to the
“OUT” port on the second PoE Extender Unit, or connect to a third
PoE Extender unit.
Note: You may daisy chain up to 4 PoE Extender units total to a
maximum of 500m (the 4th unit will supply IEEE 802.3af up to 12W
output).
Single Unit Installation
1. Using RJ45 cable, connect your Power Sourcing Equipment (PSE)
device to the “IN” port on the PoE Extender. The “PoE IN” LED
should light up solid.
2. Using RJ45 cable, connect your PoE Powered Device (PD) to the
“OUT” port on the PoE Extender. The “PoE OUT” LED should light
up solid.
Note: According to the IEEE 802.3at / 802.3af standard, the PoE
Extender will not inject power to the connected RJ45 cable if not
connected to a standard IEEE 802.3at / 802.3af device.
Each PoE Extender unit requires ~3.2 Watts maximum to power
the unit itself. Check the total power consumption of your devices
and the PoE Extender units before setting up in a daisy chain
conguration. If the overall power consumption is overloaded, the
local PSE could shut-down the entire power system.
Each cable segment is limited in 100m using standard RJ45
terminated CAT5 or higher Ethernet cable. Any other non-standard
cable or distances above 100m could result in unstable connections.
Wall-Mounting
The PoE Extender features two mounting holes on the bottom side
of the unit. The mounting holes provide the option to wall-mount
the PoE Extender as desired.
Refer to the diagram below for the maximum supported power
output at each distance.
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | WLAN-Repeater |
| Modell: | POEEXT1GAT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com POEEXT1GAT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung WLAN-Repeater StarTech.com
3 September 2024
2 September 2024
21 August 2024
21 August 2024
20 August 2024
20 August 2024
20 August 2024
19 August 2024
19 August 2024
19 August 2024
Bedienungsanleitung WLAN-Repeater
- WLAN-Repeater Asus
- WLAN-Repeater Gembird
- WLAN-Repeater Hama
- WLAN-Repeater LogiLink
- WLAN-Repeater Manhattan
- WLAN-Repeater Maxxter
- WLAN-Repeater Medion
- WLAN-Repeater Nedis
- WLAN-Repeater SilverCrest
- WLAN-Repeater ZyXEL
- WLAN-Repeater Buffalo
- WLAN-Repeater Essentiel B
- WLAN-Repeater Allnet
- WLAN-Repeater CSL
- WLAN-Repeater Devolo
- WLAN-Repeater Eminent
- WLAN-Repeater Linksys
- WLAN-Repeater Maginon
- WLAN-Repeater Netgear
- WLAN-Repeater Conrad
- WLAN-Repeater Renkforce
- WLAN-Repeater Aukey
- WLAN-Repeater Topcom
- WLAN-Repeater Xiaomi
- WLAN-Repeater Abus
- WLAN-Repeater Strong
- WLAN-Repeater Lindy
- WLAN-Repeater TOA
- WLAN-Repeater Tripp Lite
- WLAN-Repeater Mercusys
- WLAN-Repeater Audio Pro
- WLAN-Repeater Marmitek
- WLAN-Repeater TRENDnet
- WLAN-Repeater Western Digital
- WLAN-Repeater AVM
- WLAN-Repeater DJI
- WLAN-Repeater EnVivo
- WLAN-Repeater TP-Link
- WLAN-Repeater Tiptel
- WLAN-Repeater Black Box
- WLAN-Repeater Techly
- WLAN-Repeater Vision
- WLAN-Repeater Monacor
- WLAN-Repeater Huawei
- WLAN-Repeater Edimax
- WLAN-Repeater Optex
- WLAN-Repeater Totolink
- WLAN-Repeater D-Link
- WLAN-Repeater Quintezz
- WLAN-Repeater Davis
- WLAN-Repeater Vodafone
- WLAN-Repeater Digitus
- WLAN-Repeater LevelOne
- WLAN-Repeater Cisco
- WLAN-Repeater Elektrobock
- WLAN-Repeater Tenda
- WLAN-Repeater Ubiquiti Networks
- WLAN-Repeater Kramer
- WLAN-Repeater Intellinet
- WLAN-Repeater Fluke
- WLAN-Repeater Hikvision
- WLAN-Repeater EnerGenie
- WLAN-Repeater Nexxt
- WLAN-Repeater Planet
- WLAN-Repeater EnGenius
- WLAN-Repeater Mikrotik
- WLAN-Repeater Google
- WLAN-Repeater Comtrend
- WLAN-Repeater Digi
- WLAN-Repeater Funkwerk
- WLAN-Repeater Sitecom
- WLAN-Repeater Steren
- WLAN-Repeater Universal Remote Control
- WLAN-Repeater Wolfgang
- WLAN-Repeater Cudy
- WLAN-Repeater Siig
- WLAN-Repeater Atto
- WLAN-Repeater Paxton
- WLAN-Repeater Moxa
- WLAN-Repeater Iogear
- WLAN-Repeater Smart-AVI
- WLAN-Repeater Dahua Technology
- WLAN-Repeater Speco Technologies
- WLAN-Repeater Gefen
- WLAN-Repeater Heatit
- WLAN-Repeater Arris
- WLAN-Repeater ATen
- WLAN-Repeater SilverNet
- WLAN-Repeater Axing
- WLAN-Repeater KanexPro
- WLAN-Repeater Verint
- WLAN-Repeater SmartAVI
- WLAN-Repeater Axis
- WLAN-Repeater Juniper
- WLAN-Repeater Crestron
- WLAN-Repeater Extron
- WLAN-Repeater Eero
- WLAN-Repeater Atlona
- WLAN-Repeater DSC
- WLAN-Repeater Tycon Systems
- WLAN-Repeater Silex
- WLAN-Repeater Gewiss
- WLAN-Repeater EXSYS
- WLAN-Repeater Barox
- WLAN-Repeater Altronix
- WLAN-Repeater Netcomm
- WLAN-Repeater Seco-Larm
- WLAN-Repeater ALC
- WLAN-Repeater Hawking Technologies
- WLAN-Repeater IDIS
- WLAN-Repeater Sabrent
- WLAN-Repeater Nitek
- WLAN-Repeater DTRONIC
- WLAN-Repeater 7inova
- WLAN-Repeater HELGI
- WLAN-Repeater Multi-link
- WLAN-Repeater Amped Wireless
- WLAN-Repeater Ruckus Wireless
- WLAN-Repeater Heden
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
3 Oktober 2024
30 September 2024
30 September 2024
29 September 2024
29 September 2024
28 September 2024
28 September 2024
23 September 2024
Ubiquiti Networks PrismStation AC PS-5AC Bedienungsanleitung
20 September 2024