StarTech.com NETRS232485 Bedienungsanleitung

StarTech.com Server NETRS232485

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für StarTech.com NETRS232485 (12 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Manual Revision: 02/24/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

NETRS232485

Industrial 1 Port RS232/422/485 to Dual

Ethernet Serial Device Server

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s authority

to operate the equipment.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Product Diagram ....................................................................................1

Front View .................................................................................................................................................... 1

Side 1 1 .............................................................................................................................................................

Side 2 1 .............................................................................................................................................................

Introduction ............................................................................................ 2

Packaging Contents 2 .................................................................................................................................

System Requirements 2 ..............................................................................................................................

DB-9 Connector Pinout .........................................................................3

DIP Switch Conguration ...................................................................... 3

Installation ..............................................................................................4

Hardware Installation 4 ..............................................................................................................................

Software Installation 4 ................................................................................................................................

Operation ................................................................................................5

Specications .......................................................................................... 7

Technical Support ..................................................................................8

Warranty Information ............................................................................ 8

Produktspezifikationen

Marke:	StarTech.com
Kategorie:	Server
Modell:	NETRS232485
Gewicht:	329 g
Produktfarbe:	Schwarz
Internationale Schutzart (IP-Code):	IP30
Betriebstemperatur:	-40 - 70 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Verpackungsbreite:	153 mm
Verpackungshöhe:	48 mm
Paketgewicht:	504 g
Netzstandard:	IEEE 802.3, IEEE 802.3u
Unterstützte Sicherheitsalgorithmen:	128-bit WEP, SSL/TLS
Unterstützte Netzwerkprotokolle:	ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
Zertifizierung:	CE, FCC
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Gehäusematerial:	Stahl
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
Temperaturbereich bei Lagerung:	-40 - 85 °C
Auto MDI/MDI-X:	Ja
Benutzerhandbuch:	Ja
Wandmontageset:	Ja
Mittlere Betriebsdauer zwischen Ausfällen (MTBF):	533615 h
Abmessungen (BxTxH):	127 x 72 x 31 mm
Serielle Schnittstelle:	RS-232/422/485
Eingangsspannung:	12 - 48 V
Nachhaltigkeitszertifikate:	RoHS
Verkabelungstechnologie:	10/100Base-T(X)
Anzahl serielle Anschlüsse:	1
Unterstützung Datenflusssteuerung:	Ja
Link/Act-LED:	Ja
Datenübertragungsrate:	0.46 Mbit/s
Unterstützte Server-Betriebssysteme:	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008 R2, Windows Server 2012
Power-LED:	Ja
Verpackungslänge:	198 mm
Baudrate:	460.8 Kbit/s
Schutz gegen elektrostatische Entladung (ESD) (Luft):	8 kV
Elektrostatischer Entladungsschutz (ESD) (Kontakt):	4 kV
Datenbits:	5, 6,7, 8
Flusskontrolle Typ:	RTS/CTS, XON/XOFF