StarTech.com HB30A7AME Bedienungsanleitung

StarTech.com Nicht kategorisiert HB30A7AME

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für StarTech.com HB30A7AME (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 3, 2019 1:35 PM

Product Diagram (HB30A7AME)

Component Function

12-Wire Terminal Block • Used to connect an external DC Power Source

(7~48V DC Input) to the .Hub

2Screw Locks (x 8)

• Used to securely lock a to the USB Device

USB-A Port Hub on the .

• Center to center 19 Screw Lock Dimensions:

mm, thread size 4 - 40.

3Power LED • : Indicates that the Hub is receiving Green

power.

4USB-B Host Port

• Used to connect a to the .Host Computer Hub

• Center to center 24 Screw Lock Dimensions:

mm, thread size 4 - 40.

5USB-A Ports (x 7)

• Used to connect ( x 7) to the .USB Devices Hub

• Used to charge connected .USB-A Devices

• USB-A Ports support surge and 15KV ESD

(Electrostatic Discharge) Protection.

7-Port Industrial USB 3.0 (5 Gbps) Hub | USB 3.1 Gen 1 to 7x USB-A | ESD & Surge Protection

Requirements

For the latest requirements, please visit . www.startech.com/HB30A7AME

• Phillips Head Screwdriver

• Writing Utensil

• Level

• Mounting Screws (x 2)

Installation

Notes: It is recommended to use an external (+7 - 48V DC) DC Power Source

connected to the to ensure sucient power/current is 2-Wire Terminal Block

delivered to each on the . USB-A Port Hub

Powering the Hub Using the Universal Power Adapter

1. Connect the to the and to a Universal Power Adapter Terminal Block AC

Electrical Outlet.

2. Connect a (the end will depend on USB Port you are USB-B to USB Cable

connecting to) to the and to a USB port on the .USB-B Host Port Host Computer

3. The should detect the and automatically Host Computer’s Operating System Hub

install it.

4. Connect your to the (x 7) on the .USB Devices USB-A Ports Hub

Powering the Hub Using the 2-Wire Terminal Block

1. Remove the from the on the Terminal Block Connector Housing Terminal Block

Hub.

2. Using a small screwdriver (Phillips or Flat Head), loosen the screws on the Terminal

Block Connectors.

3. Connect the and from your (+7 - 48V DC) Power Ground Wires DC Power Source

to the proper , the terminals are marked on theTerminal Block Connectors Hub’s

Casing.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Din Rail Mounting

Wall Mounting

It is recommend that you use when wall mounting the .Wall Studs Hub

1. Align the on the wall in the position you want to mount the .Hub Hub

2. Using a mark o both of the .Writing Utensil Mounting Holes

3. Align the on the with the .Mounting Holes Hub Mounting Hole Marks

4. Insert the (x 2) through the and into the Mounting Screws Wall Mounting Holes

Wall.

5. Using a tighten the until the is Phillips Head Screwdriver Mounting Screws Hub

securely fasten to the .Wall

Note: Ensure the polarity of the input power is correctly matched with the Terminal

Block Pins to ensure proper function.

Terminal Block Pins

4. Insert the onto the .Terminal Block Housing Hub’s Casing

Mounting

DIN Rail Mounting

1. Align the (x 2) with the (x 4) on the back of the Din Rail Brackets Mounting Holes

Hub.

2. Insert the (x 4) through the and into the .Mounting Screws Din Rail Brackets Hub

3. Using a tighten the . Be careful not to Phillips Head Screwdriver Mounting Screws

over-tighten the . Mounting Screws

4. Clip the onto a securing the to the .Din Rail Brackets Din Rail, Hub Din Rail

Produktspezifikationen

Marke:	StarTech.com
Kategorie:	Nicht kategorisiert
Modell:	HB30A7AME
Breite:	55 mm
Tiefe:	145 mm
Gewicht:	326 g
AC-Netzadapter:	Ja
Mitgelieferte Kabel:	USB
Produktfarbe:	Schwarz
Höhe:	45 mm
Betriebstemperatur:	0 - 70 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Verpackungsbreite:	190 mm
Verpackungstiefe:	294 mm
Verpackungshöhe:	70 mm
Paketgewicht:	1300 g
Zertifizierung:	RoHS, REACH, CE, FCC, TAA
Stromverbrauch (Standardbetrieb):	65 W
Warentarifnummer (HS):	84719000
Menge pro Packung:	1 Stück(e)
Plug & Play:	Ja
LED-Anzeigen:	Leistung
Temperaturbereich bei Lagerung:	-20 - 85 °C
Anzahl Produkte pro Versandkarton:	14 Stück(e)
Länge des Versandkartons:	520 mm
Breite des Versandkartons:	400 mm
Höhe des Versandkartons:	315 mm
Netzteiltyp:	AC
Mittlere Betriebsdauer zwischen Ausfällen (MTBF):	126106 h
Ausgangsstrom:	3.25 A
Ausgangsspannung:	20 V
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	7
Schnellinstallationsanleitung:	Ja
Eingangsspannung:	100 - 240 V
Eingangsstrom:	1.4 A
Hostschnittstelle:	USB 3.2 Gen 1 (3.1 Gen 1) Type-B
Datenübertragungsrate:	5000 Mbit/s
Anzahl Anschlüsse:	7
Druckanstiegsschutz:	Ja
Hub-Schnittstellen:	USB 3.2 Gen 1 (3.1 Gen 1) Type-A
Chipsatz:	Genesys Logic - GL3523
UASP-Unterstützung:	Ja
Steckertypen enthalten:	ANZ, EU, JP, NA, UK
Terminalblock-Anschluss:	Ja
DIN-Schienenset enthalten:	Ja