StarTech.com DSKCRNRSLV Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für StarTech.com DSKCRNRSLV (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: August 24, 2023
Product ID
DSKCRNRSLV
Top View
Back View
Installation Top View
Desk Corner Sleeve - Black
Component Function
1Usable Surface Use to place a keyboard and mouse on top
2Wood Screw Holes x 2
Located on the Clamping Plates
(Optional) Used to x the to a Desk Corner Sleeve
wooden desk
Note: The provided screws are for 0.8in (20mm) or
thicker wooden desks only
3Clamping Plates x 2
Secure the to a deskDesk Corner Sleeve
Adjustable to support thicknesses of 0.5 to 1.5 in (12.7
to 38.1 mm)
4Clamping Plate
Guides
Allow to move the up and down Clamping Plates
evenly
5Clamping Plate
Screws x 2
Use the included to tighten or loosen the Hex Key
screws located on the Bottom Clamp
6Felt Strips Located around the bottom of the Usable Surface
Help protect the desk or table surface
Package Contents
Corner Sleeve x1
Hex Key x 1
4.2x16mm Wood Screws x 2
Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations
of conformance, please visit: www.startech.com/DSKCRNRSLV
L shaped desk or table with a 90° angle
Phillips head screwdriver (Only If doing the Screw-in Installation)
Wooden desk or table. (Only if doing the Screw-in Installation)
Installation
Screw-in Installation
Warnings!
*Product may vary from image
1
4
2
6
5
3
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols
of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that
all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual
and related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price
paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement may not apply to you.
Safety Measures
Assemble this product according to the instructions. Read the entire manual and ensure the instructions are fully
understood before assembling and/or using this product.
Mesures de Sécurité
Assemblez ce produit conformément aux instructions. Lisez l’intégralité du manuel et assurez-vous que les instructions
sont bien comprises avant d’assembler et/ou d’utiliser ce produit.
Veiligheidsmaatregelen
Monteer dit product volgens de instructies. Lees de gehele handleiding en zorg ervoor dat u de instructies volledig
begrijpt voordat u dit product monteert en/of gebruikt.
Säkerhetsåtgärder
Montera produkten enligt instruktionerna. Läs hela manualen och se till att du har förstått instruktionerna innan du
monterar och/eller använder produkten.
Sicherheitsmaßnahmen
Bauen Sie dieses Produkt gemäß der Anleitung zusammen. Lesen Sie das gesamte Handbuch und stellen Sie sicher, dass Sie
die Anweisungen vollständig verstanden haben, bevor Sie dieses Produkt zusammenbauen und/oder verwenden.
安全対策
最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。
Misure di Sicurezza
Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare
questo prodotto.
Medidas de Seguridad
Monte este producto siguiendo las instrucciones. Lea todo el manual y asegúrese de que las instrucciones se entienden
completamente antes de montar y/o utilizar este producto.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
The provided screws are for 0.8in (20mm) or thicker wooden desks only. If using a
thinner desk, the screws may damage the desk’s top surface.
Do not over-tighten the mounting screws.
1. Using the , adjust the and to the approximate Hex Key Left Right Clamping Plates
thickness of the using the on the .Desk Clamping Plate Screws Bottom Clamp
2. Place the centered at the desired corner mounting location.Desk Corner Sleeve
3. Adjust the until the make light contact Clamping Plate Screws Clamping Plates
with the .Desk Underside
4. Install the through the on the . Wood Screws Mounting Holes Clamping Plates
Using a the to fasten the Philips Head Screwdriver Tighten Wood Screws Desk
Corner Sleeve Deskto the .
Normal Installation
1. Using the , adjust the and to the approximate Hex Key Left Right Clamping Plates
thickness of the using the on the . Desk Clamping Plate Screws Bottom Clamp
2. Place the centered at the desired corner mounting location.Desk Corner Sleeve
3. Use the to the until the Hex Key Tighten Clamping Plate Screws Clamping Plates
are fastened onto the .Desk Underside
Quick-Start Guide
FR
www.quefairedemesdechets.fr
ASSOCIATION MAGASIN DÉCHÈTERIE
OU OU
Pensez à
donner ou
recycler
FR


Produktspezifikationen

Marke: StarTech.com
Kategorie: Nicht kategorisiert
Modell: DSKCRNRSLV

Brauchst du Hilfe?

Wenn Sie Hilfe mit StarTech.com DSKCRNRSLV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert StarTech.com

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-