Standard Horizon FF-525 Bedienungsanleitung
Standard Horizon
Marine
FF-525
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Standard Horizon FF-525 (32 Seiten) in der Kategorie Marine. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
Page 4
This guide relates to the CPN Series Chart Plotters CPN700i and CPN1010i
For older GPS Chart Plotters, the manual is available for download at
www.standardhorizon.com or by contacting Marine Product Support at 800-
767-2450 ext 6800.
This device complies with Part 15 of the FCC limits for Class A digital devices. This
equipment generates, uses and can radiate radio frequency energy and, if not installed or
used in accordance with the instructions may cause harmful interference with radio
communications.
There is no guarantee that interference will not occur in a particular instance. If this
equipment does cause harmful interference to other equipment, try to correct the problem
by relocating the equipment.
Consult an authorized STANDARD HORIZON dealer or other qualified service technician
if the problem cannot be corrected. Operation is subject to the following conditions: (1) This
device cannot cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
·The FF525 contains dangerous high-voltage circuits which only experienced techni-
cians can handle.
·STANDARD HORIZON will not be liable for errors contained herein, or for incidental
or consequential damages in connection with the performance or use of this material.
·Because we frequently update our software and applications, the pictures shown
through this Owner’s Manual may be slightly different from what you see.
When plugging in or unplugging a transducer to the FF525 make sure power is turned off.
Copyright 2012. YAESU MUSEN CO., LTD. All rights reserved. Printed in Italy.
No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD.
OM CODE: CPN Operation Manual - Issue D - 100712
CPN and FF525 Operation Manual Page 5
TABLE OF CONTENTS
1 - INTRODUCTION ..................................................................................................................7
1.0 CONVENTIONS USED.....................................................................................7
1.1 GENERAL INFORMATION...............................................................................7
1.1.0 PRODUCT SUPPORT INQUIRIES .....................................................7
2 - CONNECTING THE FF525 .................................................................................................8
2.0 CPN700i ............................................................................................................8
2.1 CPN1010i ..........................................................................................................9
3 - OPERATION ......................................................................................................................10
3.0 UNDERSTANDING THE FISH FINDER PAGE ............................................. 10
3.1 FISH FINDER DISPLAY .................................................................................12
3.2 DISPLAYING THE FISH FINDER PAGE ....................................................... 13
3.2.0 Auto Full Page.................................................................................... 13
3.2.1 200 kHz Full, 50 kHz Full and 50&200 kHz Display Pages ..............13
3.2.2 200 kHz and 50 kHz Zoom Pages .....................................................14
3.2.3 200 kHz and 50 kHz Fish/Chart Pages .............................................14
3.3 FISH FINDER SOFT KEYS ............................................................................14
4 - FISH FINDER SETUP MENU............................................................................................ 17
4.0 FISH FINDER COLOR.................................................................................... 17
4.1 PRESETS .......................................................................................................18
4.2 FREQUENCY..................................................................................................18
4.3 GAIN MODE....................................................................................................19
4.4 RANGE MENU ................................................................................................19
4.4.0 Range Mode .......................................................................................20
4.4.1 Depth ..................................................................................................20
4.4.2 Shift ....................................................................................................20
4.5 INTERFERENCE REJECTION ......................................................................20
4.6 SENSITIVITY MENU ...................................................................................... 21
4.6.0 Gain ....................................................................................................21
4.6.1 STC (Sensitivity Time Control) ..........................................................21
4.6.2 Surface Noise Filter ...........................................................................23
4.7 DISPLAY SETUP ............................................................................................23
4.7.0 Color Settings..................................................................................... 24
4.7.1 Scrolling Speed ..................................................................................24
4.7.2 White Line ..........................................................................................24
4.7.3 Fish Symbols......................................................................................24
4.7.4 A-Scope..............................................................................................24
4.7.5 Water Temperature ............................................................................ 24
4.8 TRANSDUCER SETUP ..................................................................................25
4.8.0 Keel Offset .........................................................................................25
4.8.1 Calibrate Water Speed.......................................................................25
4.8.2 Calibrate Water Temp........................................................................25
4.8.3 Calibrate Aux Temp ...........................................................................25
4.8.4 Set Defaults........................................................................................ 26
4.9 ALARMS..........................................................................................................26
Produktspezifikationen
Marke: | Standard Horizon |
Kategorie: | Marine |
Modell: | FF-525 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Standard Horizon FF-525 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Marine Standard Horizon
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
Bedienungsanleitung Marine
- Marine Humminbird
- Marine Kenwood
- Marine Garmin
- Marine Silva
- Marine Furuno
- Marine Lowrance
- Marine Simrad
- Marine Icom
- Marine President
- Marine Rockford Fosgate
- Marine Klarfit
- Marine IVT
- Marine Navionics
- Marine Dickinson Marine
- Marine Digital Yacht
- Marine Eagle
- Marine Easy
- Marine Echotec
- Marine Efoy
- Marine Fastnet
- Marine Fusion
- Marine Geonav
- Marine Interphase
- Marine Katadyn
- Marine KVH
- Marine Lofrans
- Marine Lorenz
- Marine Nasa
- Marine Navico
- Marine Nordwest-funk
- Marine Plastimo
- Marine Polmar
- Marine Raymarine
- Marine Raytheon
- Marine Sailtron
- Marine SEAFARER
- Marine WEST SYSTEM
- Marine AdvanSea
- Marine Alphatron
- Marine BandG
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
24 September 2024
22 September 2024
21 September 2024
18 September 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
26 August 2024