SPL HPm Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SPL HPm (16 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Headphone Monitoring Amplier
Headphone monitoring amplier with Phonitor Matrix
for two headphones as 500 Series module
EN
2 HPm – 500 Series
Introduction
Developer
Bastian Neu
Version 2.0 – 12/2022
This manual contains a description of the product. In no way it represents a guarantee
of particular characteristics or results of use. The information in this document has
been carefully compiled and veried and, unless otherwise stated or agreed upon,
correctly describes the product.
Specications are subject to change without notice.
Specications
General
Frequency range (-3 dB): 10 Hz – 100 kHz
Common mode rejection (1 kHz, 0 dBu ): > 82 dB
THD + N (0 dBu, 10 Hz – 22 kHz): 0.03%
Noise (A-weighted): -92.3 dBu
Dynamic range: 113 dB
Input & Output (balanced)
Input impedance: 10 kΩ
Output Impedance: 150 Ω
Headphone Outputs, 1/4" (6,35 mm) TRS Jacks
Max output power (600 Ω) +18 dBu
Max output power (300 Ω) +15 dBu
Max output power (32 Ω) +5 dBu
HPm – 500 Series 3
Scope of Delivery
HPm module, 500 Series
Manual
Measurement & Weight
Double-slot module, 500 Series
Weight: 1.76 lbs (0.8 kg)
Please keep the original packaging. In a service case the original packaging ensures a
safe transport.
Installation
Installation into a 500 Series rack:
• Please read the manual that comes with the 500 Series rack. You should receive all
necessary information for the installation process.
• For the installation or exchange of HPm, your 500 Series rack should be switched
o and the power cable should not be connected.
• Insert the HPm module into two adjacent free slots of your rack. Make sure the
connectors of the HPm is precisely aligned with the rack connectors.
• Press the HPm module carefully into the rack connectors and tighten the screws.
• Connect the HPm module with your audio environment using the connections from
your 500 Series rack.
• Connect Headphones.
• Insert the power cable to the 500 Series rack and switch it on.
EN


Produktspezifikationen

Marke: SPL
Kategorie: Empfänger
Modell: HPm

Brauchst du Hilfe?

Wenn Sie Hilfe mit SPL HPm benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger SPL

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-