SoundBot SB250 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SoundBot SB250 (5 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
SoundBot® Bluetooth Stereo Headphones SB250
User Guide
Thank you for buying the SoundBot SB250 Bluetooth Stereo Headphones from EyeCandis. These
Headphones are designed to be convenient, stylish and provide high quality audio Playback from any
Bluetooth enabled Audio Device or wired only device.
The SoundBot SB250 Bluetooth Stereo headphones can also be used to receive telephone calls
while in use and will automacally pause the audio playback in order to receive the call and when
the call ends audio Playback will resume.
Please read this user Guide thoroughly before use so that you can understand the setup and
funcons.
Contents
Please check your SB250 Bluetooth Stereo Headphones package contains the following items
SB250 Bluetooth Stereo Headphones
3.5MM Audio Cable
USB Charging Cable
User Guide
Product Features
1. Volume Up
2. Volume Down
3. USB Charging connector
4. Audio Cable Connector
5. Microphone locaon
6. Mul-Funcon Buon and LED Indicator
7. Skip track forward
8. Skip Track Backwards
9. NFC (Near Field Communicaon) Pairing posion (Oponal)
10. Folding Hinges
Setup
Note: Please fully charge the baery before 1 st me use.
Turn on the Headphones
To turn on the Headphones simply hold the Mulfuncon Buon down for 3 seconds. The LED
Indicator will ash BLUE 3 mes, and you’ll hear the message “Power On” through the Headphones.
To turn o the Headphones simply hold the Mulfuncon Button down for 3 seconds. The LED
Indicator will ash RED 3 mes, and you’ll hear the message “Power O” through the Headphones.
Connecng with Bluetooth
1. Press the Mulfuncon buon to turn the headphones ON
2. Hold down the Mulfuncon Buon for 7 Seconds and the LED light will ash Red and Blue
The Headphones are trying to look for a device to connect to.
3. Go to the Bluetooth opon in the sengs of your Bluetooth Audio device or smartphone
and in the list of Devices select SB250
4. The Headphones are now ready to use
Connecng with NFC (oponal)
To connect the Headphones with NFC enabled devices. Ensure the NFC feature is enabled and simply
touch the right side Headphone area marked NFC against your device for 2 second.
Connecng with Audio Cable
To connect the Headphones to devices that do not support Bluetooth. Plug the provided Audio cable
into the Headphone port on the left and connect the other end of the cable into the audio device.
Note: The audio cable will allow you to listen to music even if the Headphone Baery is out of
power. Also allows you to use the Headphones in places where wireless signals are restricted such as
Hospitals and Aircra.
Descripon Headphone funcons of
Adjust volume
Press the volume +/- key to adjust the volume. One short press will adjust one level. W n the he
volume reaches max or minimum volume the Headphones will play a chime.
Play/Pause music
Press Mulfuncon Buon one me to Play or Pause music.
Previous/Next song
When playing music you can press “forward” buon to play next song and “backward” buon to
play previous song.
Virtual 3D sound
To enable the 3D sound funcon hold the “previous” buon for 1 second to switch the 3D to ON or
hold the "Next" buon for 1 second to switch the 3D OFF.
Sleep mode
If the Headphones are powered on but no audio is being played the Headphones will enter Power
Saving Sleep mode aer 10 minutes. To acvate the Headphone just push the Mulfuncon Buon
and the music will resume.
Using Audio Cable
Receive a Phone Call


Produktspezifikationen

Marke: SoundBot
Kategorie: Kopfhörer
Modell: SB250

Brauchst du Hilfe?

Wenn Sie Hilfe mit SoundBot SB250 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kopfhörer SoundBot

Bedienungsanleitung Kopfhörer

Neueste Bedienungsanleitung für -Kategorien-