Sony STR-DB870 Bedienungsanleitung

Sony Empfänger STR-DB870

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sony STR-DB870 (68 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/68
FM Stereo
FM-AM Receiver
Operating Instructions
4-235-985- (1)14
STR-DB1070
STR-DB870
Owner’s Record
The model and serial numbers are located on the rear panel. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. Serial No.
© 2001 Sony Corporation
2
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To prevent fire, do not Cover the ventilation of the
apparatus with news papers, table-cloths, curtains,
etc. And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Don’t throw a battery, dispose it as
the injurious wastes.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
For customers in the United States
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
You are cautioned that any changes or modification
not expressly approved in this manual could void
your authority to operate this equipment.
Note to CATV system installer:
This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
E SNERGY TAR® is a U.S. registered
mark.
As an
E
NERGY
S
TAR
®
partner, Sony
Corporation has determined that this
product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
For customers in Canada
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
** “DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
3
Table of Contents
Demonstration Mode
The demonstration will activate the first time you
turn on the power. When the demonstration starts,
the following message appears in the display
twice:
“Now Demonstration Mode!! To finish the
demonstration, please press POWER KEY while
this message appears in the display. Thank you!”
To cancel the demonstration
Press ?/1 to turn the receiver off during the
previous message. The next time you turn the
receiver on, the demonstration will not appear.
To view the demonstration
Hold down SET UP and press to turn on the?/1
power.
Note
Running the demonstration will clear the
receiver’s memory. For details on what will be
cleared, see “Clearing the receiver's memory” on
page 18.
Parts Identification
Main unit ............................................... 5
Hooking Up the Components
Required cords ....................................... 6
Antenna hookups ................................... 7
Audio component hookups .................... 8
Video component hookups .................. 10
Digital component hookups ................. 11
Multi channel input hookups ............... 13
Other hookups ..................................... 14
Hooking Up and Setting Up
the Speaker System
Speaker system hookups ..................... 17
Performing initial setup operations ..... 18
Multi channel surround setup .............. 19
Checking the connections .................... 24
Basic Operations
Selecting the component ..................... 25
Listening to the sound
in another room ............................. 27
Changing the display ........................... 27
Enjoying Surround Sound
Selecting a sound field ........................ 28
Understanding the multi channel
surround displays .......................... 32
Customizing sound fields .................... 33
Receiving Broadcasts
Storing FM stations automatically
(AUTOBETICAL)* ...................... 38
Direct tuning ........................................ 38
Automatic tuning ................................. 39
Preset tuning ........................................ 39
Using the Radio Data System (RDS)* ...
41
* Models of area code CEL only.
** STR-DB870 area code CEL only.
Other Operations
Naming preset stations and program
sources ........................................... 43
Recording ............................................ 43
Using the Sleep Timer ......................... 44
Adjustments using
the SET UP button ....................... 45
CONTROL A1 control system ......... 47
Additional Information
Precautions .......................................... 49
Troubleshooting................................... 49
Specifications ...................................... 52
Tables of settings using SURR, LEVEL,
EQ, and SET UP buttons ............... 55
Adjustable parameters for each sound
field ............................................... 58
Remote button description** ............... 63
Changing the factory setting of a function
button** ............................................ 66


Produktspezifikationen

Marke: Sony
Kategorie: Empfänger
Modell: STR-DB870

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sony STR-DB870 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Sony

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-