Sonic Alert DB200 Bedienungsanleitung
Sonic Alert
Sicherheit
DB200
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sonic Alert DB200 (2 Seiten) in der Kategorie Sicherheit. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
WIRELESS DOORBELL & TELEPHONE
SIGNALER
MODEL DB200
SONIC ALERT’S 5 YEAR LIMITED WARRANTY
The Wireless Doorbell Signaler Model DB200 is
warranted against manufacturing defects in materials
and workmanship for two (5) years from the date of
purchase. Within this period Sonic Alert will repair or
replace at our option the DB200 without charge for parts
and labor. Simply send the DB200 (postpaid) and a
copy of your sales slip as proof of purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083
OPERATION
The state-of-the-art, Doorbell Signaler will alert you when
someone comes to visit. The Doorbell Signaler, Model DB200 is
the only doorbell and intercom signaler that requires no wires and
can be installed in seconds. DB200 will alert you that someone is
at your door by flashing a light plugged into the base unit or any
Sonic Alert receiver anywhere in your home.
The DB200 is designed to work with homes with or without an
existing doorbell or chime and all existing buzzer and intercom
systems.
Other features include selectable number of flashes (5 or 10),
different flash code for front door, rear door, or intercom.
Additional sensors sold separately for 2nd door or source. There is
also a built-in chime for hearing members of the family (can be
turned off by using the switch on the right side of the DB200).
The DB200 receives an RF radio signal from the DB200 sensor,
and flashes the light plugged into the built-in outlet of the DB200.
Use a 300 watt or less incandescent lamp only. The DB200 can
send a signal to all Sonic Alert remote receivers. Note: Must be
used only with Sonic Alert receivers for proper operation,
other manufacturers products are not reliable with our
products.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause
undesired operation.
WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void user’s authority to operate the equipment.
SIGNALER DB SENSOR
INSTALLATION
To install the DB200, follow the diagrams and instructions on
the following page that match the type of installation you
need for your home. If the installation follows diagrams 1-4,
a 9 volt alkaline battery is required in the DB sensor.
Please check the switches on your DB200 Sensor before
installing. Do not change switches 1-6 these are pre set.
It’s very important that the switch settings on both units
match . See figure 1.1 on back side for settings.
DB Sensor settings, smaller unit: 1 thru 6 dip switches are
set at the factory and only need to be changed if your
neighbor has a DB200 or DB100. The 8 dip switches should
be set as follows:
a) 1 thru 3 dip switches are set in the ON position and
4 thru 6 are set in the OFF position. If you need to
change the dip switch settings to avoid interference
with your neighbors make sure you change both the
DB200 Signaler to match the DB Sensor.
b) The 8th switch determines the number of flashes
when someone is at your door. In the ON position
your until will flash 5 times and in the OFF position
your unit will flash 10 times. This feature is
wonderful when you have an extra sensor for the
back door. One sensor would be set in the ON
position and the other would be set in the OFF
position.
c) The 7th switch is for use when using 2 sensors, this
switch determines the settings for front or back door.
If using for one door only set this switch in the ON
position. At this setting your unit will flash at a fast
rate and will make a ding/dong sound. If using 2
sensors one for the front door and one for the back
door the setting for the 2nd sensor would be in the
OFF position. In this position the front door will
flash at a different flash rate than the back door. In
the OFF position your back door sensor will flash at
a slow rate with a dong/dong sound.
Function settings:
The function switch on the back of DB sensor (smaller unit)
should be set depending on which installation application you
need. See diagram on back.
Switch position:
Top - Intercom/ Buzzer System/ Wireless Chime Box
Installation see (3 &4).
Center - Outside Doorbell Button Only see (1 & 2)
Bottom - Hard Wired to Existing Doorbell chime Box
Installation see (5).
DB200 Signaler, larger of the 2 units:
The speaker switch allows you to turn the
Audio Alarm ON or OFF. ON is up and
OFF is Down.
The Dip Switches 1-6 should match the DB Sensor Dip
switches 1-6. The factory setting is 1 thru 3 ON and 4 thru
6 OFF. The 7th and 8th switches are not active switches and
it will not matter if they are set to ON or OFF, unless your
using 2 sensors one for the front and one for the back door.
If you need to change the dip switch settings to avoid
interference with your neighbors, make sure both units
settings match.
Dip Switch settings DB 200
Figure 1.1
Multi-Function-Input Jack:
Located on the left side of the DB Sensor, this input jack is for
installations as shown in diagram 2 & 5.
Troubleshooting & Help:
If you’ve followed the directions and are still having problems
please try the following suggestions:
1) Check battery in the sensor, must be an 9 volt alkaline type.
2) Check that dip switch settings 1-6 match both the sensor and
the signaler as shown in figure 1.1 above.
3) Check outlet for power.
4) Move the Signaler to an outlet closer to the sensor unit.
5) If using the Multi-Function input jack make sure that the wires
are not touching each other. See diagram number 2 & 5 for proper
installation.
6) Check Function setting switch for proper position.
7) For Technical help call 1-248-577-5400, M-F 7:30 a.m.- 6:00
p.m. Eastern time. Or e-mail us with your questions at
info@sonicalert.com
Warranty:
Thank you for purchasing this high quality Sonic Alert product, we
hope you will have many years of satisfied use. All Sonic Alert
products come with a limited 5 year warranty so please retain
your receipt in safe place for possible future reference, you will
need in the event of warranty service.
Sonic Alert, Inc.
1050 East Maple Rd.
Troy, MI 48083
V/TTY 1-248-577-5400 fax 248-577-5433
e-mail: info@sonicalert.com
Web Site: www.SonicAlert.com
See all our product offerings at:
www.SonicAlert.com
Or call for a free catalogue 1-248-577-5400 V/TTY
REV 1.1
on
off
1 2 3 4 5 6 7 8
Produktspezifikationen
| Marke: | Sonic Alert |
| Kategorie: | Sicherheit |
| Modell: | DB200 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sonic Alert DB200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sicherheit Sonic Alert
23 August 2024
22 August 2024
22 August 2024
22 August 2024
18 August 2024
18 August 2024
17 August 2024
12 August 2024
10 August 2024
10 August 2024
Bedienungsanleitung Sicherheit
- Sicherheit Basetech
- Sicherheit Medion
- Sicherheit Nedis
- Sicherheit Tevion
- Sicherheit Panasonic
- Sicherheit Brennenstuhl
- Sicherheit Bosch
- Sicherheit Siemens
- Sicherheit Velleman
- Sicherheit Powerfix
- Sicherheit Devolo
- Sicherheit Dymond
- Sicherheit Eminent
- Sicherheit Maginon
- Sicherheit Netgear
- Sicherheit Technaxx
- Sicherheit Alecto
- Sicherheit Gira
- Sicherheit Jacob Jensen
- Sicherheit MarQuant
- Sicherheit Topcraft
- Sicherheit Blaupunkt
- Sicherheit Grundig
- Sicherheit Trebs
- Sicherheit Alphatronics
- Sicherheit FlinQ
- Sicherheit Geemarc
- Sicherheit I-Onik
- Sicherheit Abus
- Sicherheit Elro
- Sicherheit EZVIZ
- Sicherheit Smartwares
- Sicherheit Switel
- Sicherheit Yale
- Sicherheit Steinel
- Sicherheit Easy Home
- Sicherheit Lamax
- Sicherheit Perel
- Sicherheit Fysic
- Sicherheit Goobay
- Sicherheit Fenton
- Sicherheit Waeco
- Sicherheit Honeywell
- Sicherheit B/R/K
- Sicherheit First Alert
- Sicherheit BML
- Sicherheit Doro
- Sicherheit Hagenuk
- Sicherheit Unitec
- Sicherheit IGet
- Sicherheit Juwel
- Sicherheit Theben
- Sicherheit Kopp
- Sicherheit Xavax
- Sicherheit Batavia
- Sicherheit Monacor
- Sicherheit Bavaria
- Sicherheit JUNG
- Sicherheit Ednet
- Sicherheit Nest
- Sicherheit Optex
- Sicherheit AXA
- Sicherheit Aritech
- Sicherheit Humantechnik
- Sicherheit Eufy
- Sicherheit Skytronic
- Sicherheit Audiovox
- Sicherheit Grothe
- Sicherheit Friedland
- Sicherheit DNT
- Sicherheit Sygonix
- Sicherheit LevelOne
- Sicherheit Plustek
- Sicherheit Orbis
- Sicherheit Prestigio
- Sicherheit Grandstream
- Sicherheit BTicino
- Sicherheit EasyMaxx
- Sicherheit Eden
- Sicherheit Foscam
- Sicherheit Hikvision
- Sicherheit Heidemann
- Sicherheit Somfy
- Sicherheit Dahua
- Sicherheit Dedicated Micros
- Sicherheit Dericam
- Sicherheit Directed Electronics
- Sicherheit Electronics Line
- Sicherheit Elkron
- Sicherheit Elro-Flamingo
- Sicherheit Entrya
- Sicherheit Epine
- Sicherheit FBII
- Sicherheit Fito
- Sicherheit Flamingo FA15RF
- Sicherheit Fracarro
- Sicherheit Galaxy
- Sicherheit GE Security
- Sicherheit Goliath
- Sicherheit Golmar
- Sicherheit Guardall
- Sicherheit Home Protector
- Sicherheit Home8
- Sicherheit HomeWizard
- Sicherheit I-Tel
- Sicherheit Iiquu
- Sicherheit Indexa
- Sicherheit Inner Range
- Sicherheit Interlogix
- Sicherheit Jablotron
- Sicherheit Jupiter Pro
- Sicherheit Kocom
- Sicherheit Kompernass
- Sicherheit Ksenia
- Sicherheit Logicom
- Sicherheit ME
- Sicherheit Mikros
- Sicherheit Mr Safe
- Sicherheit Myfox
- Sicherheit Nemef
- Sicherheit NetBotz
- Sicherheit NetworX
- Sicherheit Niko
- Sicherheit Nor-tec
- Sicherheit Notifier
- Sicherheit One Concept
- Sicherheit One2track
- Sicherheit Oplink
- Sicherheit Paradox
- Sicherheit PIR Alarm
- Sicherheit Powermax
- Sicherheit PROmax
- Sicherheit Protector
- Sicherheit QuattSecure
- Sicherheit RISCO Group
- Sicherheit Satel
- Sicherheit SecuFirst
- Sicherheit Secure Pro
- Sicherheit Securitas
- Sicherheit Selvag
- Sicherheit Smanos
- Sicherheit Smartalarm
- Sicherheit SmartHome
- Sicherheit Stobo
- Sicherheit Storage Options
- Sicherheit Storex
- Sicherheit Tegui
- Sicherheit Unitron
- Sicherheit Urmet
- Sicherheit Visonic
- Sicherheit Voxx
- Sicherheit Wanscam
- Sicherheit Woonveilig
- Sicherheit Xena
- Sicherheit Y-cam
- Sicherheit Zmodo
- Sicherheit Axis
- Sicherheit Ajax
- Sicherheit AngelEye
- Sicherheit AceSee
- Sicherheit Airbolt
- Sicherheit Alhua - Dahua
- Sicherheit Bitron Video
- Sicherheit AVTech - Velleman
- Sicherheit Bolyguard
- Sicherheit BRK DICON
- Sicherheit Bellman
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
24 September 2024
20 September 2024
19 September 2024
17 September 2024
17 September 2024
16 September 2024
16 September 2024
27 August 2024
27 August 2024