Smart-AVI XTWALLS Bedienungsanleitung

Smart-AVI AV extender XTWALLS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Smart-AVI XTWALLS (2 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Use a single CAT5 to broadcast high

resolution SXGA, Stereo Audio, RS232

and IR up to 1000ft away.

XTWALL

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

XTWALL SPECIFICATIONS

VGA Data

Format RGBHV, RGsB, YUV, Y/C, CVBS

Resolution Up to 1900 x 1200

VGA, SVGA, XGA, SXGA

Connector type HD 15 socket

Audio

Signal Type Stereo unbalanced

Connector 3.5mm jack socket

Power

Requirements 5VDC @.5A

Connector 2.1mm DC jack (center +ve)

Physical

Dimensions 135 x 90 x 23mm (26 with pegs)

Weight .8 lbs or .36 kg

Pin No. Name Description

2 RxD Receive Data on DB9 Male

3 TxD Transmit Data on DB9 Male

5 SGND Ground

Pin No. Name Description

2 TxD Transmit Data on DB9 Female

3 RxD Recieve Data on DB9 Female

5 SGND Ground

Recieve on DB9 Male

Transmit on DB9 Female

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties

of merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained

herein or for incidental or consequential damages

in connection with the furnishing, performance or

use of this material.

No part of this document may be photocopied,

reproduced or translated into another language

with

out prior written consent from Smart-AVI.

For the complete manual, visit www.smartavi.com.

S M A R T A U D I O V I D E O I N N O VAT I O N

Attaching the Power Supply

Insert black wire into the positive input (left) and 1.

secure.

Insert white wire into the negative input (right) 2.

and secure.

Plug into outlet.3.

Introduction

The XTWALL allows the extension of a wide range of

video and audio formats, RS232, and IR via a sing

Category 5 Unshielded Twisted Pair (UTP) cable.

Features

 Supports Dual Screens.

 Uses easy to install, inexpensive CAT-5/5e/6/7/8.

 Output reaches up to 1,000 feet (300 m).

 Resolutions up to 1900x1200.

 300 MHz Bandwidth.

 Sends high-resolution UXGA, Stereo Audio and

 Compatible with Line Level Stereo Audio Signals.

 High ground loop immunity.

 Built-in lightning, power surge and transient

protection.

 Designated trimmer in the remote unit to

compensate for cable length.

 Compact Metal Case Enclosure.

 Supports RS232 and IR

What’s in the box?

XTPRO

Please check the contents of the package before

beginning installation.

Adjusting and Tuning the Signal

In order to fine tune the signal, adjust the individual

dials one at a time starting with GREEN, then BLUE,

and lastly RED. As you turn the dials you will notice the

colors slightly change as you increase or decrease the

strength. All dials should be around the same distance.

Preparing & Connecting System CAT5 Cable

Following is the wiring standard for terminating CAT 5 cable

using RJ-45 connector:

Pair 1 Pins 1 & 2

Pair 2 Pins 3 & 6

Pair 3 Pins 4 & 5

Pair 4 Pins 7 & 8

Connectors: RJ-45

Capacitance: 14 pf/ft (46.2 pf/m)

Conductor Gauge: 24 AWG

Impedance: 100 +/- 15 ohms

4 - Pair

Connecting The Transmitter

1. Connect the output of the computer video card to the

video input of the transmitter using the included male

to male video cable.

2. Connect the output of the computer audio card to

the audio input of the transmitter using 3.5mm audio

male to male audio cable.

3. Connect local monitor to the VGA out of the

transmitter.

4. Connect external speakers to the transmitter’s audio

out (Standard 3.5mm stereo miniplug).

5. In the back of the unit connect the CAT5 cable that

will connect to the receiver (XTW-RX).

*NOTE: You can not use RS232 and IR at the same time.

Connecting The Receiver

1. Connect CAT5 cable (coming from the transmitter) to

the back of the receiver.

2. Connect 1-2 display monitors to the VGA out

connectors on the front of the receiver.

3. Connect 1-2 sets of external speakers to the audio

output connections on the front of the unit.

(Standard 3.5mm stereo Miniplug)

XTWALL Package Content

Qty Items Part No.

1 XTWALL Transmitter unit XTW-TX

1 XTWALL Receiver unit XTW-RX

2 5 volt dc power supply PS5D1AW-US

1 HDD 15 male to male VGA

cable (6ft) CC-VGAMM-06

Optional

1 Audio 3.5 mm stereo mini-

plug cable CC-ADMM06

1 IR EYE Receiver SM-EYE

1 IR Emitter SM-LED

1 Serial m/f DB9 6ft. CCSERMF06

Installation Diagram

XTWALL Transmitter XTWALL Receiver

Blue Green Red

Produktspezifikationen

Marke:	Smart-AVI
Kategorie:	AV extender
Modell:	XTWALLS
Gewicht:	227 g
Produktfarbe:	Weiß
Gleichstrom-Anschluss (DC):	Ja
Typ:	AV-Sender & -Empfänger
Unterstützte Video-Modi:	1080i, 1080p, 720p
Externes Netzteil:	Ja
Anzahl VGA (D-Sub) Anschlüsse:	6
Maximale Auflösung:	1920 x 1200 Pixel
Maximal mögliche Übertragungsstrecke:	300 m
unterstütze Kabeltypen:	Cat5, Cat5e, Cat6, Cat7
Bandbreite:	400 MHz
Audioausgang:	2
RJ-45-Eingangsanschlüsse:	2
Verbindungstyp:	HD15