Smart-AVI VCT-100S Bedienungsanleitung

Smart-AVI AV extender VCT-100S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Smart-AVI VCT-100S (2 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained herein

or for incidental or consequential damages in

connection with the furnishing, performance or use

of this material.

No part of this document may be photocopied,

reproduced or translated into another language with

out prior written consent from Smart-AVI.

For the complete manual, visit www.smartavi.com.

Use a single CAT5 to broadcast high

resolution SXGA up to 1000ft (300 m)

VCAT

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

3MART!UDIO6IDEO)NTEGRATION

SNOITACIFICEPSTACV

ataDAGV

tamroF SBVC,C/Y,VUY,BsGR,VHBGR

noituloseR 0021x0061otpU

AGXS,AGX,AGVS,AGV

epyTrotcennoC tekcos51DH

rewoP

stnemeriuqeR CDV5

rotcennoC kcajCDmm1.2

lacisyhP

snoisnemiD mm32x08x59

thgieW gK21.0

Introduction

The VCAT range of products allows the extension of a

wide range of video formats via a single Category 5

Unshielded Twisted Pair (UTP) cable. Using a unique

method of data transfer, the system allows a display

device to be situated up to 1000ft (300 meters) from

the source.

Features

 Output reaches up to 1,000 feet.

 Resolutions up to 1600 x 1200.

 Sends high-resolution UXGA power signals over

single CAT5.

 300 MHz Bandwidth.

 Compatible with VGA, XGA, Sun, MAC and SGI.

 Sync Format / Polarity Preservation.

 High ground loop immunity.

 Built-in lightning, power surge and transient

protection.

 Remote Units come with Buffered Outputs.

 Designated trimmer in the remote unit to

compensate for cable length.

What’s in the box?

V C A TV C A TV C A TV C A TV C A T

Please check the contents of the package before

beginning installation.

Installation Diagram

VCAT Transmitter Installation Diagram Adjusting and Fine Tuning the SignalAdjusting and Fine Tuning the SignalAdjusting and Fine Tuning the SignalAdjusting and Fine Tuning the SignalAdjusting and Fine Tuning the Signal

Preparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 Cable

Preparing & Connecting System CAT5 Cable

Following is the wiring standard for terminating CAT 5

cable using RJ-45 connector:

Pair 1 Pins 1 & 2

Pair 2 Pins 3 & 6

Pair 3 Pins 4 & 5

Pair 4 Pins 7 & 8

Connectors:Connectors:

Connectors:Connectors:Connectors: RJ-45

Capacitance:Capacitance:

Capacitance: 14 pf/ft (46.2 pf/m)

Conductor Gauge:Conductor Gauge:Conductor Gauge:Conductor Gauge:Conductor Gauge: 24 AWG

Impedance:Impedance:Impedance:Impedance:Impedance: 100 +/- 15 ohms

4 - Pair

Connecting The TransmitterConnecting The TransmitterConnecting The TransmitterConnecting The TransmitterConnecting The Transmitter

1. Connect the output of the computer video card to the

video input of the transmitter using the included

male to male video cable.

2. Connect the CAT5 cable that will connect to the

receiver unit.

3. Connect the power supply.

Connecting The ReceiverConnecting The ReceiverConnecting The ReceiverConnecting The ReceiverConnecting The Receiver

1. Connect CAT5 cable (coming from the transmitter) to

the back of the receiver.

2. Connect the display monitor to the VGA out

connector on the front of the receiver.

3. Connect the power supply.

In order to fine tune the

signal, adjust the individual

dials one at a time starting

with GREEN, then BLUE,

and lastly RED. As you turn

the dials you will notice the

colors slightly change as

you increase or decrease

the strength.

tnetnoCegakcaP001-XLS

ytQ smetI .oNtraP

2 CDV5 SU-A1V5-SP

1 tinUrevieceRTACV XR-TACV

1 tinUrettimsnarTTACV XT-TACV

1 elbacAGVelamotelam51DDHtf6 60-MMAGVS-CC

VCAT Receiver Installation Diagram

Produktspezifikationen

Marke:	Smart-AVI
Kategorie:	AV extender
Modell:	VCT-100S
Gewicht:	110 g
Produktfarbe:	Violett
Gleichstrom-Anschluss (DC):	Ja
Typ:	AV-Sender & -Empfänger
LED-Anzeigen:	Ja
Abmessungen (BxTxH):	71.4 x 87.4 x 21.6 mm
Externes Netzteil:	Ja
Anzahl VGA (D-Sub) Anschlüsse:	1
Maximale Auflösung:	1920 x 1200 Pixel
Maximal mögliche Übertragungsstrecke:	300 m
Arbeitsspannung:	5 V
unterstütze Kabeltypen:	Cat5, Cat5e, Cat6, Cat7
Bandbreite:	300 MHz
RJ-45-Eingangsanschlüsse:	1
Verbindungstyp:	HD15