Smart-AVI HDX-POE-TX Bedienungsanleitung

Smart-AVI AV extender HDX-POE-TX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Smart-AVI HDX-POE-TX (2 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

USER MANUAL

HDX-POE

HDMI, IR, and Power Extender

Over Single CAT5e/6 Cable

VIDEO

Resolution 800X600, 1024X768 ,

1280X1024, 1366X768,

1920X1200, 480i, 720p,

1080i, 1080p and 3D

Color Depth Deep Color 36/30/24 Bit at

1080p and 3D

Video Bandwidth 10.2 Gbps

Input Video Signal 1.2 Volts P-P

Input DDC Signal 5 Volts (TTL)

TECHNICAL SPECIFICATIONS

800.AVI.2131

Tel: (818) 503-6200 Fax: (818) 503-6208

11651 Vanowen St. North Hollywood, CA 91605

SmartAVI.com

Designed and Manufactured in the USA Watch and control HDTV 1080p video up to

250ft from the source via Cat5e/6 using

HDBaseT and POE technology

SYSTEM

Interface RJ-45

Cable

Requirements

CAT5/5e/6

Maximum Length 250 ft.

Input • HDMI-A 19PIN Socket

• 12VDC Jack

• 3.5mm Jacks for IR Receiver

Output • RJ45 Jack

• 3.5mm Jack for IR Emitter

I/O CONNECTOR (Transmitter)

AUDIO

Format Up to PCM 8 channel, Dolby

Digital TrueHD,

and DTS-HD Master Audio

Input Interface HDMI (Integrated)

Output Interface HDMI (Integrated)

Signal Type 38kHz, 56kHz

Interface 3.5 mm Jack Socket (Female)

Input • RJ45 Jack

• 3.5mm Jack for IR Receiver

• 12VDC Jack

Output • 3.5mm Jack for IR Emitter

• HDMI-A 19PIN Socket

I/O CONNECTOR (Receiver)

OTHER

Power 12VDC2.5A

Approvals UL, CE, ROHS Compliant

Operating Temp. 32 to 104°F (0 to 40 °C)

Storage Temp. -4 to 140 °F (-20 to 60 °C)

Humidity 10% to 85% (Non-condensing)

Dimensions 0.9” x 2.9” x 3.7”

Weight 0.26 lbs

OVERVIEW

Are you extending your HD signal reach and finding

that the best potential new locations don’t have the

proper power available? You may not have to scale

down your plans if you consider using an HDX-POE

system from SmartAVI. HDX-POE injects power into

HDBaseT CAT5/CAT6 cable that transports both

HDMI and IR and picks it off at the load.

CONNECTING THE HDX-POE

1. Power off the HDMI source and display.

2. Connect an HDMI cable from the HDMI source to the HDMI IN port of the HDX-POE transmit-

ter.

3. Connect an IR emitter (optional) to the IR OUT port on the transmitter.

4. Connect the HDX-POE transmitter to the HDX-POE receiver using a CAT5e/6 cable (up to

150ft).

5. Connect an IR receiver (optional) to the IR IN port on the receiver.

6. Connect an HDMI cable from the HDMI OUT port on the HDX-POE receiver to the HDMI Dis-

play.

7. Connect the power on the HDX-POE transmitter plugging in their power adapters (12VDC2A)

or provide 12VDC input from the rear DC input port.

NOTE: If the RX side has connected DC adapter, TX can get the DC power over the CAT5e/

CAT6 cable, so leave DC input port empty. Only 1 power supply is required for both units.

8. Power on the HDMI source, displays and speakers. The RX will read the EDID from the moni-

tor, and then pass the data into the TX automatically.

WHAT’S IN THE BOX?

PART NO. DESCRIPTION

HDX-POES HDBaseT HDMI & IR Extender over a

Single Cat5e/6 Cable Includes: [HDX-

POE-TX, HDX-POE-RX and (PS12V2.5A

Wall Mount)]

APPLICATION DIAGRAM

FEATURES

• Supports POE: Can be powered by TX or RX

• Extends HDMI,IR and Power Output over one

Cat5e/6 Cable

• Extends IR Control Signals for Remote Control

• Uses HDBaseT Technology

• Full HD support: 1080p@60Hz@48 bit/pixels,

1080p@120Hz@24 bit/pixels, 3D, 1080P60Hz

and 4K x 2K@30Hz@24bit

• Data Signals up to 3.4Gbps

• HDMI 1.4 and HDCP Compliance

• Uses Bi-Directional IR Communication

• Transmits High-Quality Dolby TrueHD, DTS-HD MA

Audio Signals

• Transmits 1080p Resolution Video up to 250 ft

Produktspezifikationen

Marke:	Smart-AVI
Kategorie:	AV extender
Modell:	HDX-POE-TX
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 85 %
Zertifizierung:	UL, CE, FCC
Typ:	AV-Sender
Temperaturbereich bei Lagerung:	-20 - 60 °C
Unterstützte Video-Modi:	480i, 720p, 1080i, 1080p
Unterstützte Grafik-Auflösungen:	800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1366 x 768,1920 x 1200 (WUXGA)
Ausgangsstrom:	2.5 A
Maximale Auflösung:	1920 x 1200 Pixel
Nachhaltigkeitszertifikate:	RoHS
Maximal mögliche Übertragungsstrecke:	70 m
Arbeitsspannung:	12 V
Bandbreite:	10.2 Gbit/s
HDMI-In:	1
3,5 mm (1/8-inch) in:	Ja
Transmitter-Abmessungen (BxTxH):	74 x 94 x 33 mm
Gewicht Transmitter:	118 g
RJ-45-Ausgangsanschlüsse:	1
3,5 mm (1/8-inch) out:	Ja