Smart-AVI HDC-VXS Bedienungsanleitung

Smart-AVI AV extender HDC-VXS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Smart-AVI HDC-VXS (2 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained herein

or for incidental or consequential damages in

connection with the furnishing, performance or use

of this material.

No part of this document may be photocopied,

reproduced or translated into another language with

out prior written consent from Smart-AVI.

For the complete manual, visit www.smartavi.com.

Use a single CAT5 to broadcast

Video, Stereo Audio and Bi-Directional

IR up to 1000ft away(333m)

HDC-VX

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

METI

egnaR

revoRI+VA

PTU5TAC

)m333(tf000,1

lortnoCetomeR

egnaR

tf52

tupnIoediV

epytlangi eS tisopmoCMACES/LAP/CSTN

p-pV1oediV

htdiwdna zB HM001

ecnadepm mI hO57

rotcenno eC lameF,ACR

tupnIoiduA

epytlangi oS iduAoeretS

htdiwdna BB d0,zHM51

ecnadepm mI hO001

rotcennoC RCA

tuptuOoediV

epyTlangi eS tisopmoCMACES/LAP/CSTN

oediV

htdiwdna zB HM001

ecnadepm mI hO57

rotcenno eC lameF,ACR

tuptuOoiduA

epyTlangi oS iduAoeretS

htdiwdna BB d0,zHM51

ecnadepm mI hO001

.RCA

tupnIRI

epyTlangi RS IdetaludomzHk005-03

otcenno eC lameF,kcajinimmm5.3

lacisyhP

snoisnemi "D 0.1x"5.2x"5.2

)mm53x48x58

thgie

25 lb (0.9 Kg.).

Connector

HDC-VX SPECIFICATIONS

m_hdcvx-020309

Introduction

The HDC-VX range of products allow the extension

of Video, Stereo Audio and Infra Red control signals

using single CAT-5 UTP (category 5, unshielded

twisted pair) cable. The HDC-VX is the first product

for this application.

Features

Uses easy to install, inexpensive CAT5.

Output reaches up to 1000 feet (300 m).

Supports PAL, NTSC and SECAM.

Video 100 MHz Bandwidth.

Video cable compensation.

Sends Composite Video, Stereo Audio, IR and

Power signals over single CAT5.

Compatible with Line Level Stereo Audio Signals.

High ground loop immunity.

Built-in lightning, power surge and transient

protection.

Remote Units come with Buffered Outputs.

Compact Enclosure.

Optional power supply for remote unit.

Fully compliant with standard modulated IR

and the latest IRDA.

Fully transparent path for all protocols and

data transfers.

What’s in the box?

HDC-VX

Please check the contents of the package before

beginning installation.

Installation Diagram

ytQ metI noitpircseD

DEL-MS

EYE-MS

Installation Instructions

Operating Instructions

Once installation is completed, verify that the power is

present at all devices in the system. The peripheral

devices should be ready for use.

sdradnatSgniriW5TAC

#ni AP 865AIT/AI BE 865AIT/AIE

e1 pirtsneerghtiwetih eW pirtsegnarohtiwetihW

n2 eergdilosroepirtsetihwhtiwneerG egnarodilosroepirtsetihwhtiwegnarO

3 epirtsegnarohtiwetihW epirtsneerghtiwetihW

e4 ulbdilosroepirtsetihwhtiweulB eulbdilosroepirtsetihwhtiweulB

e5 pirtseulbhtiwetih eW pirtseulbhtiwetihW

6 egnarodilosroepirtsetihwhtiwegnarO dilosroepirtsetihwhtiwneerG

n7 worbdilosroepirtsnworbhtiwetihW nworbdilosropirtsnworbhtiwetihW

n8 worbdilosroepirtsetihwhtiwnworB nworbdilosroepirtsetihwhtiwnworB

Connecting the IR

Use the Diagram for the IR connection.

Connecting the Transmitter

1. Connect the AV transmitter to your DVD, VCR,

satelliter receiver or other source of video signal.

2. Using RCA M-M cables , connect transmitter to audio

source.

3. Connect IR LED to the IR window on the source

device.

4. Connect power supply to the unit. Observe LED

lighting up indicating power present.

Connecting the Receiver

Connect receiver to the display, typically a TV

monitor using Video cable (not included) and audio

cable RCA Male to Male.

Connect the Transmitter to the Receiver

Connect the transmitter to the receiver using

Category 5 UTP cable (Purchased separately). The

CAT 5 UTP cable, if purchased in

bulk, will be wired using 568A or

568B wiring standard. Once

connected, check that the power

LEDs on both the receiver and the

transmitter are on, IR status LED is on and RX LED is

flashing when Remote control is used indicating that

communication is in progress.

HDC-VX-TX

HDC-VX-RX

PS5VD1A

Video/Audio/IR Transmitter

Video/Audio/IR Receiver

IR Emitter

IR Eye “Optional”

Power supply 5VDC1A

Produktspezifikationen

Marke:	Smart-AVI
Kategorie:	AV extender
Modell:	HDC-VXS
Gewicht:	900 g
Gleichstrom-Anschluss (DC):	Ja
Typ:	AV-Sender & -Empfänger
LED-Anzeigen:	Ja
Audio-System:	Stereo
Analoges Signalformatsystem:	NTSC, PAL, SECAM
Composite Video-Eingang:	1
Maximale Auflösung:	- Pixel
Maximal mögliche Übertragungsstrecke:	300 m
unterstütze Kabeltypen:	Cat5, Cat5e, Cat6, Cat7
Bandbreite:	100 MHz
Empfängerdimensionen (B x T x H):	95.3 x 69.9 x 22.2 mm
Composite Video-Ausgang:	1
RJ-45-Eingangsanschlüsse:	1
RJ-45-Ausgangsanschlüsse:	1
Breite des Senders:	95.3 mm
Tiefe des Senders:	69.9 mm
Höhe des Senders:	22.2 mm
Verbindungstyp:	RCA, 3.5mm mini Jack