Smart-AVI DVX-4P-TXS Bedienungsanleitung

Smart-AVI AV extender DVX-4P-TXS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Smart-AVI DVX-4P-TXS (2 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

User

Manual

DVX-4P

Extend 4 DVI-D, RS232, Stero Audio and USB1.1 using a

Single Rack Mount System.

Please visit smartavi.com for a expanded version of this manual.

m_dvx4p_093009

eci

ications

PIN 17

PIN 1

PIN 24

PIN 8

C 4

C 1

C 2

C 5

C 3

#niP langiS #niP langiS

1 -2ataDS.D.M. 6T 1 tceteDgulPtoH

2 +2ataDS.D.M. 7T 1 -0ataDS.D.M.T

d3 leihS4/2ataDS.D.M. 8T 1 +0ataDS.D.M.T

4 -4ataDS.D.M. 9T d1 leihS5/0ataDS.D.M.T

5 +4ataDS.D.M. 0T 2 -5ataDS.D.M.T

6 kcolCCD 1D 2 +5ataDS.D.M.T

7 ataDCD 2D d2 leihSkcolCS.D.M.T

8 cnyS.treVgolan 3A 2 +kcolCS.D.M.T

9 -1ataDS.D.M. 4T 2 -kcolCS.D.M.T

01 +1ataDS.D.M.T

1 d1 leihS3/1ataDS.D.M. 1T C deRgolanA

21 -3ataDS.D.M. 2T C neerGgolanA

31 +3ataDS.D.M. 3T C eulBgolanA

41 rewoPV5 4+ C cnySzroHgolanA

51 DN 5G C dnuorGgolanA

5VDC 1.6A

DVI

deo Interface

DVI

eso

920 x 1200

60Hz, Resolution up to 1280 x

024 min. 75H

ut Inter

DVI-D

ingle-Link

)

Upgradeabl

nboard Flas

USB

T6 (STP)

Maximum Ran

e 220ft

B Data Data Rate o

12Mb

ompatable with USB version 1.

onnectors

USB-TX-DVX-4P

ype

USB-TX-DVX-4P

ype B

Aud

(

TX-DB9Female

)

(

RX-DB9Male

)

rotoco

ex, transparent to a

rate

Audio

ype Stero

Audio

Bandwidth

5MHz.

Impedance 100 Oh

onnector 3.5 mini jack

ower

0/120

Dimension

(

inches

)

(

17” x 1.73”

)

ight

(

lbs

)

rni

(

)

565

Facsimi

(

818

)

565-00

Connecting the Audio and RS232

Connecting the TX/RX

Connecting the DVI

1. Turn off computer and monitor.

2. Connect DVI male to male cable between the

computer and the transmitter.

3. Connect monitor or projector to the DVI port

on the receiver.

5. Repeat for 3 other ports.

Connect a shielded Cat 6 STP cable

between port 1 on the transmitter and port 1

on the receiver.

1. Connect an RS232 cable and/or audio cable to the

1. Connect DVI, USB (In/Out) and Audio/RS232 as outlined.

2.Connect Power Cord.

3. Turn on TX and RX.

souce unit.

2. Connect the Audio using 3.5mm cable at the transmitter

3. Connect the Speaker/s. at the Receiver.

4. Connect the last CAT6

STP Cable. Preparing & Connecting System CAT5 Cable

Following is the wiring standard for terminating CAT 5

cable using RJ-45 connector:

Pair 1 Pins 1 & 2

Pair 2 Pins 3 & 6

Pair 3 Pins 4 & 5

Pair 4 Pins 7 & 8

Co n nec t o rs : RJ-45

Capacit ance: 14 pf/ft (46.2 pf/m)

Conductor Gauge: 24 AWG

Impedance: 100 +/- 15 ohms

4 - Pair

Note:

The receiver provides remote power up to 500

mA to the connected peripherals. This power comes

from the host computer and is passed by the transmitter

to the receiver. In some applications, and external power

supply is required. SmartAVI can provide a power supply

for such cases with the receiver and transmitter units.

1. Connect the transmitter to the host using the A-B

USB cable (included with the unit).

2. The A side of the connector would go to the com-

puter host and the B side would be connected to

the transmitter.

3. Connect the receiver to the peripheral.

4. Connect the CAT6 STP Cable.

Connecting the USB In/Out

Connection Diagram

TRANSMITTER RECEIVER

POWER

110V/120V

POWER

110V/120V

RS232

AUDIO

DVI (IN)

PC/MAC

Mouse/Keyboard

6 STP Cable

220ft Max

DVI (OUT)

RS232

AUDIO

Monitor

USB1.1

(on Front Panel)

Produktspezifikationen

Marke:	Smart-AVI
Kategorie:	AV extender
Modell:	DVX-4P-TXS
Produktfarbe:	Schwarz
Gleichstrom-Anschluss (DC):	Ja
Typ:	AV-Sender
Unterstützte Video-Modi:	1080i, 480p, 720p
Anzahl der USB-Anschlüsse:	1
Abmessungen (BxTxH):	88.9 x 69.8 x 31.7 mm
Maximale Auflösung:	1920 x 1200 Pixel
unterstütze Kabeltypen:	Cat6
Audioanschlüsse:	1
RS-232 Eingangs-Ports:	1
DVI-Eingangsanschlüsse:	2
DVI-Ausgangsanschlüsse:	2