Smart-AVI 4KWALL-UHD Bedienungsanleitung

Smart-AVI Schalter 4KWALL-UHD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Smart-AVI 4KWALL-UHD (2 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war fĂŒr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
UHD HDMI 2X2
VIDEO WALL CONTROLLER
AND 4X4 MATRIX SWITCH
THE IDEAL VIDEO WALL
CONTROLLER AND
VIDEO MATRIX
HARDWARE SOLUTION
WITH STUNNING 4K RESOLUTION
AND SEAMLESS TRANSITIONS
Quick Start Guide
VIDEO
Format HDMI 2.0
Input Resolution Up to 3840x2160 @60 Hz
Output Resolution Up to 3840x2160 @60 Hz
Input Interface (4) HDMI 19-pin (female)
Output Interface (4) HDMI 19-pin (female)
AUDIO
Format HDMI Digital Audio
CONTROL
Front Panel Push Buttons
IR Remote Control IR RC5
Ethernet (TCP/IP) RJ-45
RS-232 DB9 (female)
OTHER
Power Adapter 12VDC3A
Dimensions 13”W x 9”H x 1.9”D
Weight 4.8 lbs
Approvals UL, CE, ROHS Compliant
Operating Temp. +32 to +104°F (0 to +40°C)
Storage Temp. -4 to 140°F (-20 to +60°C)
Humidity Up to 80% (No Condensation)
Emulation Keyboard and Mouse
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
888.994.7427, 702.800.0005
2917 E Alexander Rd.
North Las Vegas, NV 89030
SmartAVI.com
TECHNICAL SPECIFICATION
4KWALL-UHD
WHAT’S IN THE BOX
PART NO. DESCRIPTIONQ-TY
4KWALL-UHD 1
UHD HDMI 2x2 video wall
controller and 4x4 matrix
switch
Power Supply 1 12VDC3A
Quick Start Guide 1
INTRODUCTION
FRONT PANEL CONTROL
To create a four-screen video wall with four UHD video
inputs, the 4KWALL-UHD video wall controller and matrix
provides a truly simple plug-and-play hardware solution
with incredible 4K UHD resolution and seamless transitions
between channels. With four inputs and four outputs, users
can arrange their content in numerous ways, providing
unique functionality by combining the abilities of a video
wall hardware controller and a matrix.
Users can stretch one video input over all four screens,
send an input to each screen, send all four inputs to each
screen or select a Picture-in-Picture display to be shown
on a main input. You can even ip pictures for exciting
new display congurations! The 4KWALL-UHD showcases
UHD picture quality on all channels, as well as digital
audio output over HDMI. Better still, there’s no software
installation required, as all content management options
are effortlessly controlled via the 4KWALL-UHD video wall
controller unit itself. There’s no need for drivers or updates,
just connect the inputs and screens to the controller and
it’s ready to go.
Video Wall Mode: Select the Video Wall button and wait for
the light above to begin ashing. Then select the desired
input. Example: Video wall for input 1 = “Videowall, 1”
Individual Mode: Select an input and wait for the light
above to begin ashing. Then select the desired output.
Example: Input 2 to output 4 = “2, 4”
PiP Mode: Select the PiP button and wait for the light
above to begin ashing. Then select the desired main input
and wait for the light above to begin ashing. Then select
the desired PiP input. Example: Input 4 with PiP input 2 =
“PiP, 4, 2”
Quad Mode: Select the QUAD button.
Cycle Resolutions: Select and hold the Change Resolution
button for a few seconds then release. The resolution
will cycle from the following options: 1920x1080@60Hz,
3820x2160@30Hz, and 3820x2160@60Hz.
1. Position your 4KWALL-UHD conveniently and keep the power cord unplugged.
2. Connect up to 4 screens to the HDMI output ports on the back of the 4KWALL-UHD using HDMI cables.
3. Connect up to 4 HDMI inputs i.e. (Blu-Ray player, Digital Signage, computer, etc) to the HDMI input ports on the back of
the 4KWALL-UHD using HDMI cables.
4. Connect the power cord to the 4KWALL-UHD and wait for the unit to initialize. This should take about a minute.
5. Connect an Ethernet cable (CAT5, 5e, 6) to the RJ45 jack marked LAN.
6. Connect an RS-232 cable from a PC to the RS-232 port.
7. Connect the IR EYE (receiver) to the IR input jack.
See the full for more information on how to install the individual transmitter and receiver units and for User Manual
information on how to control SAVIGATE.
4KWALL-UHD Back Panel
4KWALL-UHD Front Panel
HARDWARE INSTALLATION
VIDEO IN
VIDEO OUT
LINK
4KWALL-UHD


Produktspezifikationen

Marke: Smart-AVI
Kategorie: Schalter
Modell: 4KWALL-UHD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Smart-AVI 4KWALL-UHD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalter Smart-AVI

Bedienungsanleitung Schalter

Neueste Bedienungsanleitung fĂŒr -Kategorien-