Skytronic 100.333 Bedienungsanleitung
Skytronic
Heimkinosystem
100.333
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Skytronic 100.333 (9 Seiten) in der Kategorie Heimkinosystem. Dieser Bedienungsanleitung war fĂĽr 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/9
V1.1
5.0 HOMETHEATRE SYSTEM
100.330
5.0 Home Theatre System black
100.333
5.0 Home Theatre System walnut
INSTRUCTION MANUAL
HANDLEIDING
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
BACKSIDE
SPECIFICATION
Power max.
3x 50W + 2x 180W, equivalent to 1150W
Power rms
335W
Frequency response
20Hz - 20kHz
Impedance
4 Ohm
Woofer
2x 16 cm
Tweeter
Neodymium
Dimensions
Front: 245 x 210 x 815mm - Center: 120 x 300 x
120mm - Rear: 120 x 120 x 145mm
Weight per piece
Front: 6.3kg - Center: 1.2kg - Rear: 0.6kg
Congratulations to the purchase of our SkyTec speaker box.
Read the instructions thoroughly prior to using the unit.
SAFETY INSTRUCTIONS
ď‚· Hearing damage:
SkyTec loudspeakers are easily generating high
sound pressure levels (SPL) sufficient to cause
permanent hearing damage to performers,
production crew and audience members. Care
should be taken to avoid prolonged exposure to
SPL in excess of 85 dB.
ď‚· Make sure that the amplifier is switched off
when the speaker box is connected or
disconnected.
ď‚· The box must be installed by a qualified
technician who has knowledge of the
techniques.
ď‚· Do not overload the box to avoid damage to the
speakers.
ď‚· Connect the box only to a good quality
amplifier:
Direct voltage at the amplifier output will
damage the speakers
“Clipping” (overdrive) of the amplifier can
damage the woofer, tweeter and horn speaker
ď‚· Do not overload the speakers to avoid damage
to the components.
ď‚· Do not place an open fire (candle, etc.) on top
or next to the box - FIRE HAZARD
ď‚· For indoor use only. If the box is used outdoors,
you need to make sure that no humidity can
enter the box.
ď‚· Make sure that the box is placed on a stable,
solid surface.
ď‚· The boxes can be stacked but do not put more
than 60kg weight on the box.
ď‚· The boxes can be hung. Use only strong and
approved mounting material. The installation
should only be carried out by a qualified
technician who has knowledge of the
techniques and regulations regarding the
mounting/hanging of speaker boxes. During the
mounting, make sure that nobody is standing
below the mounting area.
ď‚· Use only stands which are designed to support
the weight of the speaker. Do not attempt to
place more than one speaker on a stand
designed for a single speaker.
ď‚· Do not place liquids on the box and protect it
against humidity. Humidity can shorten the life
time considerably.
ď‚· If the unit is damaged to an extent that internal
parts are visible, DO NOT connect the unit and
DO NOT switch it on. Contact your dealer or
Tronios.
ď‚· Never try to repair the unit yourself. It does not
contain any user serviceable parts. All repairs
must be carried out by a qualified technician.
ď‚· Set the amplifier to the lowest volume prior to
switching it on.
ď‚· Keep the unit out of the reach of children.
Protect your environment. Recycle packing material
whenever possible.
Do not throw a faulty unit into normal household
waste but bring it to a special collection
point. A large part of it can be recycled.
CONNECTIONS:
First of all, check the specifications of the amplifier if it is suitable for your speaker boxes. Pay particular
attention to the power rating and impedance.
Check if the amplifier is switched off. If yes, you can connect the speakers. PLEASE NOTE! Watch the polarity
(+/-). Wires of the same colour must be connected to the same sign of every side i.e. the + of the amplifier must
be connected to the + of the speaker box. If the connections are inverted, the sound quality will diminish.
Only use high quality speaker cables that are suitable for the power and distance between the amplifier and the
speaker.
Connection of several speakers:
When a second speaker is connected in parallel the impedance will change from 8 Ohms to 4 Ohms. Check if
the amplifier can handle this. If more that two speakers are connected in parallel, the impedance will go below 4
Ohms. Most of the amplifiers can’t handle this!
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or
disrespect of the warnings contained in this manual. Tronios cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.
Produktspezifikationen
| Marke: | Skytronic |
| Kategorie: | Heimkinosystem |
| Modell: | 100.333 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Skytronic 100.333 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heimkinosystem Skytronic
13 August 2024
Bedienungsanleitung Heimkinosystem
- Heimkinosystem Samsung
- Heimkinosystem Sony
- Heimkinosystem AEG
- Heimkinosystem Yamaha
- Heimkinosystem Grundig
- Heimkinosystem Kenwood
- Heimkinosystem Daewoo
- Heimkinosystem Aiwa
- Heimkinosystem Auna
- Heimkinosystem Bose
- Heimkinosystem Pioneer
- Heimkinosystem JBL
- Heimkinosystem JVC
- Heimkinosystem Onkyo
- Heimkinosystem Teufel
- Heimkinosystem Akai
- Heimkinosystem Rotel
- Heimkinosystem Soundmaster
- Heimkinosystem Pure Acoustics
- Heimkinosystem Advance Acoustic
Neueste Bedienungsanleitung fĂĽr -Kategorien-
16 September 2024
24 August 2024
23 August 2024
23 August 2024
22 August 2024
22 August 2024
21 August 2024
21 August 2024
4 August 2024
3 August 2024