Skytec SPL1000 Bedienungsanleitung

Skytec Empfänger SPL1000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Skytec SPL1000 (12 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
STEREO POWER AMPLIFIERS WITH EQ
SPL500MP3 /EQ - 178.766
SPL700MP3 /EQ - 178.769
SPL1000MP3/EQ - 178.772
Instruction Manual
Gebruiksaanwijzing
Gebrauchsanleitung
SPL–EQ SERIES - 2 -
Basis aansluiting /Basic connections / Grundanschlüsse :
SPL–EQ SERIES - 3 -
UK
Congratulations to the purchase of our SPL Amplifier.
Read the instructions thoroughly prior to using the unit.
SAFETY INSTRUCTIONS
• Hearing damage:
Loudspeakers are easily generating high sound
pressure levels (SPL) sufficient to cause permanent
hearing damage to performers, production crew and
audience members. Care should be taken to avoid
prolonged exposure to SPL in excess of 85 dB.
• Make sure that the amplifier is switched off when the
speaker box is connected or disconnected.
• Do not overload the amplifier or speakers to avoid
damage to the components.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
• Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit will not be used for
a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
• If the unit has not been used for a longer period of
time, condensation may occur. Let the unit reach
room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.
• During operation, the housing becomes very hot. Do
not touch it during operation and immediately after.
• Do not use cleaning sprays to clean the switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice
from a specialist.
• Do not force the controls.
• Do not place an open fire (candle, etc.) on top or next
to the box - FIRE HAZARD
• Make sure that the amplifier is placed on a stable,
solid surface.
• Do not place liquids on the amplifier and protect it
against humidity. Humidity can shorten the life time
considerably.
• If the unit is damaged to an extent that internal
parts are visible, DO NOT connect the unit and DO
NOT switch it on. Contact your dealer.
• Never try to repair the unit yourself. It does not
contain any user serviceable parts. All repairs must
be carried out by a qualified technician.
• Set the amplifier to the lowest volume prior to
switching it on.
• Keep the unit out of the reach of children.
• Switch the unit off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the unit.
• Make sure that the mains lead cannot be damaged
when people walk on it. Check the mains lead
before every use for damages and faults!
Protect your environment. Recycle packing
material whenever possible.
Do not throw a faulty unit into normal household
waste but bring it to a special collection
point. A large part of it can be recycled.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit.
This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by
inappropriate use or disrespect of the warnings contained in this manual. SPL cannot be held responsible for personal
injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in
whatever form.
CONNECTIONS
First of all, check the specifications of the amplifier if it is suitable for your speaker boxes. Pay particular attention
to the power rating and impedance. Check if the amplifier is switched off. If yes, you can switch on the speakers.
PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same sign of every
side i.e. the + of the amplifier must be connected to the + of the speaker box. If the connections are inverted, the
sound quality will diminish. Only use high quality speaker cables that are suitable for the power and distance
between the amplifier and the speaker.

Produktspezifikationen

Marke: Skytec
Kategorie: Empfänger
Modell: SPL1000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Skytec SPL1000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Skytec

Skytec

Skytec SPL500EQ Bedienungsanleitung

17 August 2024
Skytec

Skytec SPL-700 Bedienungsanleitung

17 August 2024
Skytec

Skytec SPL-1500EQ Bedienungsanleitung

16 August 2024
Skytec

Skytec SPL-300MP3 Bedienungsanleitung

13 August 2024
Skytec

Skytec SPL700 Bedienungsanleitung

12 August 2024
Skytec

Skytec SPL1000 Bedienungsanleitung

11 August 2024
Skytec

Skytec SPL-2000EQ Bedienungsanleitung

11 August 2024
Skytec

Skytec PRO-240 Bedienungsanleitung

11 August 2024
Skytec

Skytec SPL-2000 Bedienungsanleitung

10 August 2024
Skytec

Skytec SPL-1000 Bedienungsanleitung

10 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024