Skytec SMW18 Bedienungsanleitung

Skytec Subwoofer SMW18

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Skytec SMW18 (13 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/13
SMW E SERI
SUBWOOFER
INSTRUCTION MANUAL
HANDLEIDING
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
2 - 13
Basis aansluiting /Basic connections / Connexions de base / GrundanschlĂĽsse:
Bi Amp connection Branchement bi-amplié / Doppelverstärkeranschluss: /
Cable Connector / Aansluitingen / Connecteur de câble / Kabelverbinder / Conector del cable :
Regulatory Requirement:
EN 55013
EN 55020
EN 61000-3- -3-3 2/
3 - 13
Congratulations to the purchase of our SkyTec subwoofer.
Read the instructions thoroughly prior to using the unit.
SAFETY INSTRUCTIO NS
ď‚· Hearing damage:
SkyTec loudspeakers are easily generating high
sound pressure levels (SPL) suicient to cause
permanent hearing damage to performers,
production crew and audience members. Ca re
should be taken to avoid prolonged exposure to
SPL in excess of . 85 dB
 Make sure that the amplier is switched o
when the speaker box is connected or
disconnected.
 The box must be installed by a qualied
technician who has knowledge of the
techniques .
ď‚· Do not overload the box to avoid damage to the
speakers.
ď‚· Connect the box only to a good quality
amplier:
Direct voltage at the amplier output will
damage the speakers
“Clipping” (overdrive) of the amplifier can
damage the woofer, tweeter and horn speaker
ď‚· Do not overload the speakers to avoid damage
to the components.
ď‚· Do not place an open fire (candle, etc.) on top
or next to the box - FIRE HAZARD
ď‚· For indoor use only. If the box is used outdoors,
you need to make sure that no humidity can
enter the box.
ď‚· Make sure that the box is placed on a stable,
solid surface.
ď‚· The boxes can be stacked but do not put more
than 60kg weight on the box.
ď‚· The boxes can be hung. Use only strong and
approved mounting material. The installation
should only be carried out by a qualied
technician who has knowledge of the
techniques and regulations regarding the
mounting/hanging of speaker boxes. During the
mounting, make sure that nobody is standing
below the mounting area.
ď‚· Use only stands which are designed to support
the weight of the speaker. Do not attempt to
place more than one speaker on a stand
designed for a single speaker.
ď‚· Do not place liquids on the box and protect it
against humidity. Humidity can shorten the life
time considerably.
ď‚· Only use suitable means of transportation if you
want to move the box BEWARE OF YOUR –
BACK!!
ď‚· If the unit is damaged to an extent that internal
parts are visible, DO NOT connect the unit and
DO NOT switch it on. Contact your dealer or
Tronios .
ď‚· Never try to repair the unit yourself. It does not
contain any user serviceable parts. All repairs
must be carried out by a qualied technician.
 Set the amplier to the lowest volume prior to
switching it on.
ď‚· Keep the unit out of the reach of children.
Protect your environment. Recycle packing material
whenever possible.
Do not throw a faulty unit into normal
household waste but bring it to a special
collection point. A large part of it can be
recycled.
CONNECTIONS:
First of all, check the specications of the amplier if it is suitable for your speaker boxes. Pay particular
attention to the power rating and impedance. Check if the amplier is switched o. If yes, you can switch on the
speakers. PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same
sign of every side i.e. the + of the amplier must be connected to the + of the speaker box. If the connections
are inverted, the sound quality will diminish.Only use high quality speaker cables that are suitable for the power
and distance between the amplier and the speaker.
Connection of several speakers:
A subwoofer is specially designed to reproduce the low frequencies (basses) and not the whole frequency
range. If you want to reproduce the full frequency range, you need to use this subwoofer in combination with a
full range speaker box such as the SM10.
The connections can be made in two ways: 1 amplier for 4 speakers. 2 ampliers one for the subwoofer –
(mono/bridged) and one for the (stereo) box. (See g.). If a second speaker is connected in parallel (see g.),
the impedance of 8 Ohms will reduce to 4 Ohms. Please check if your amplier can handle this. If more than
two speakers are connected in parallel, the impedance will fall below 4 Ohms. Most of the ampliers are not
suitable for this!
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or

Produktspezifikationen

Marke: Skytec
Kategorie: Subwoofer
Modell: SMW18

Brauchst du Hilfe?

Wenn Sie Hilfe mit Skytec SMW18 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Subwoofer Skytec

Skytec

Skytec SMWBA15 Bedienungsanleitung

12 August 2024
Skytec

Skytec SMW18 Bedienungsanleitung

12 August 2024

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Pioneer

Pioneer S-21W Bedienungsanleitung

13 Oktober 2024
JL Audio

JL Audio SGR-10TW3 Bedienungsanleitung

13 Oktober 2024
Polk

Polk DB1040 Bedienungsanleitung

10 Oktober 2024
Blaupunkt

Blaupunkt GBW801 Bedienungsanleitung

7 Oktober 2024
JL Audio

JL Audio TW1 Bedienungsanleitung

6 Oktober 2024
Jensen

Jensen J12W Bedienungsanleitung

6 Oktober 2024
Musway

Musway MT169Q Bedienungsanleitung

6 Oktober 2024
JL Audio

JL Audio 12W0v3 Bedienungsanleitung

4 Oktober 2024
Yamaha

Yamaha YST-SW315PN Bedienungsanleitung

2 Oktober 2024
JBL

JBL SW10 Bedienungsanleitung

30 September 2024