Skytec 172.567 Bedienungsanleitung

Skytec Mischer 172.567

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Skytec 172.567 (50 Seiten) in der Kategorie Mischer. Dieser Bedienungsanleitung war fĂŒr 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/50
12 CHANNEL MUSIC MIXER
172.564
20 CHANNEL MUSIC MIXER
172.567
Instruction Manual
Gebruiksaanwijzing
Mode d’Emploi
Gebrauchsanleitung
GB
Congratulations on the purchase of this SkyTec mixer.
Please read this manual carefully prior to using the unit.
Warning:
- Read the manual prior to using the unit.
- Keep the manual for future reference.
- Keep the packaging for safer transport in its original packaging
- For indoor use only.
- Prior to the first use, have the unit checked by a qualified person.
- The unit contains voltage carrying parts. DO NOT open the mixer.
- When you unplug the unit from the mains always pull the plug, never the lead.
- Never plug or unplug the unit with wet hands.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a
mains outlet.
- Repairs and lamp replacement has to be carried out by a qualified technician.
- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
- Do no place the unit near heat sources.
- Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside the
housing. Please let the unit reach room temperature prior to use.
- Keep out of the reach of children.
- All channel controls and the master volume control must be set to zero prior to switching the
unit on.
- Set the channel slider controls slowly. Fast variation can overload the speakers.
- To prevent clipping of the amplifier do not set the volume level too high.
- Switch the amplifier on at latest and switch it off at first.
- Do not use cleaning sprays for the slider controls. The residues of these spray cause dust
deposits in the controls. If a problem occurs, please consult a specialist.
MONO INPUT CHANNELS
1. BALANCED INPUT
Electronically balanced input for standard XLR
connectors. Features a 48V phantom power (to be
switched on via (35))
2. LINE INPUT
This unbalanced input accepts balanced and
unbalanced microphones, turntables, keyboard, etc.
3. LOW CUT
This push button improves the use of the
microphone. When the low cut function is activated
you have fewer problems with noise, interference
and pop noises.
4. TRIM
This function allows you to set the input sensitivity
of each channel to the constant level of the input
signal.
5. HIGH
Sets the high frequencies on each channel. Leave
this knob in the “0” position first. Set the signal once
the music has started to play in order not to damage
the speakers. Turn cw to increase the higher
frequencies and ccw to reduce them.
6. FREQUENCY & MID
This equalization function has a “bell” reaction with
a fixed Q fader of 1.5. The frequency can be set
between 100 & 8000 Hz and the volume between
-15 & +15 dB.
7. LOW
This knob sets the low frequency range of each
channel. Leave this knob in the “0” position first. Set
the signal once the music has started to play in
order not to damage the speakers. Turn cw to
increase the lower frequencies and ccw to reduce
them


Produktspezifikationen

Marke: Skytec
Kategorie: Mischer
Modell: 172.567

Brauchst du Hilfe?

Wenn Sie Hilfe mit Skytec 172.567 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mischer Skytec

Bedienungsanleitung Mischer

Neueste Bedienungsanleitung fĂŒr -Kategorien-