SilverCrest SBR 3.0 A1 Bedienungsanleitung

SilverCrest Kabelloser Audioempfänger SBR 3.0 A1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SilverCrest SBR 3.0 A1 (7 Seiten) in der Kategorie Kabelloser Audioempfänger. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

11/2015 – V 1.7

Trademarks

The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

use of such marks by TARGA GmbH is under license.

USB is a registered trademark.

Other names and products may be the trademarks or registered trademarks of their respective owners.

Introduction

Thank you for purchasing a SilverCrest Bluetooth

audio transmitter/receiver SBR 3.0 A1, hereinafter

referred to as SBR 3.0 A1.

Intended use

This SBR 3.0 A1 is an information technology device and enables you on the one hand to transmit

audio signals wirelessly, for example, from your stereo system to a Bluetooth

headset. You can also

wirelessly transmit, for example, music files that are on your smartphone to a stereo system and play

them back on the system. The SBR 3.0 A1 is not designed for commercial use or operation in a

company, but solely for private purposes. Any other use is not as intended. This Bluetooth

device

complies with all required standards and directives In the event of any modification to the Bluetooth

audio transmitter/receiver that was not approved by the manufacturer, compliance with these

standards is no longer guaranteed. The manufacturer does not accept any liability for any resulting

damage or faults in such cases.

Please observe the regulations and laws in the country of use.

Supplied items

Take the device and all accessories from the packaging. Remove all packaging material and check

that all parts are complete and undamaged. In the event of an incomplete or damaged delivery,

please contact the manufacturer.

A. Bluetooth

audio transmitter/receiver SBR 3.0 A1

B. RCA cable

C. USB charging cable

D. Audio cable (3.5mm jack plug)

E. USB power supply

F. Adapter (3.5mm to 6.3mm)

G. These operating instructions (symbolic representation)

Technical data

SBR 3.0 A1

Input voltage / current 5V / max. 500mA

Profile support A2DP

Bluetooth

specification V3.0 + EDR

Range max. 10 metres

Internal battery Li-Ion 700mAh

Charging time (with supplied USB power supply) approx. 8 hours

Operating time when the battery is fully charged min. 8 hours

Operating temperature 0°C to +40°C

Operating air humidity max. 85% rel. humidity

(non-condensing)

Dimensions (W x H x D) approx. 5.9 x 2.4 x 5.9cm

Weight approx. 52g

USB power supply

Type KPTEC / K05S050100G

Input voltage / input current 100 – 240V , 50/60Hz / 0.2A

Output voltage / output current 5V / 1.0A

Protection class II

Weight (including USB cable) approx. 55g

The technical data and design may be changed without notification.

Safety instructions

Before using the SBR 3.0 A1 (A) for the first time, please read the following instructions carefully even

if you are familiar with using electronic devices. Store these operating instructions in a safe place for

future reference. If you pass on the SBR 3.0 A1 (A) to someone else, be sure to always include these

operating instructions. They are an integral part of the device.

DANGER! This symbol in conjunction with the "danger" note indicates an imminent

dangerous situation which, if not prevented, could result in serious injury or even death.

WARNING! This symbol in conjunction with the "warning" note indicates important

information for safe operation of the device and the safety of the user.

This symbol warns of health risks due to high volume.

This symbol indicates other important information on the topic.

Operating environment

The SBR 3.0 A1 (A) is not designed for use in environments with a high temperature or humidity, and

must be kept free from dust. Operating temperatures and operating air humidity: 0°C to +40°C, max.

85% rel. humidity. Note that furniture may have been treated with care products that could damage

the rubber feet of the SBR 3.0 A1 (A).

DANGER! Ensure that

 no direct heat sources (e.g. heating) can affect the SBR 3.0 A1 (A) because it may be damaged

otherwise

 the SBR 3.0 A1 (A) is not exposed to direct sunlight or bright artificial light because it may be

damaged otherwise

 no fire sources (e.g. burning candles) are placed on or near the SBR 3.0 A1 (A); there is a risk of

fire

 no foreign objects penetrate the device because there is a risk of a short circuit

 contact with dripping water and splashes and corrosive liquids is prevented and the SBR 3.0 A1 (A)

is never operated near water; in particular, it should never be immersed (do not place any objects

filled with liquids, e.g. vases or drinks, on or near the SBR 3.0 A1 (A); there is a risk of fire or a short

circuit)

 the SBR 3.0 A1 (A) is never covered while it is charging as it can become heated

 the SBR 3.0 A1 (A) is switched off immediately if there are any unusual sounds or if smoke is emitted

from it

 the SBR 3.0 A1 (A) is not exposed to extreme temperature fluctuations as this could result in

condensation and electrical short circuits; there is a risk of fire. If the SBR 3.0 A1 (A) was subjected

to extreme temperature fluctuations, however, wait (approx. 2 hours) until it has reached ambient

temperature before use

 all cables are always laid in such a manner that nobody is obstructed or can trip over them. There is

a risk of injury.

 the USB power supply (E) is only inserted in a suitable socket that is always easily accessible and

never covered. The USB power supply (E) is never opened or handled with wet hands. There is a

risk of a fatal electric shock!

 the USB power supply (E) is always disconnected from the mains power supply during a

thunderstorm. Also if there are any unusual sounds or if smoke is emitted from the power supply.

DANGER! Children and persons with

disabilities

Electrical devices do not belong in the hands of children. This device can be used by children aged 8

and older and by persons with reduced mental or sensory abilities, movement disorders or lack of

experience and knowledge if they are supervised or have been instructed on the safe use of the SBR

3.0 A1 and understand the resulting risks. Children should always be supervised to ensure that they do

not play with this device. Cleaning and user maintenance must not be carried out by children without

supervision.

Always keep plastic packaging out of reach.

It poses a suffocation risk!

DANGER! Radio interface

Turn the device off in aircraft, hospitals, operating rooms or in the vicinity of medical electronic systems.

The transmitted radio waves can impair the functionality of sensitive devices. Keep the device at least

20cm away from any pacemakers or implantable cardioverter defibrillators, since the proper

functioning of the pacemaker can be impaired by radio waves. The transmitted radio waves can cause

interference in hearing aids. Do not place the SBR 3.0 A1 in the vicinity of flammable gases or in a

potentially explosive environment (e.g. paint shop) when the radio components are switched on

because the transmitted radio waves can cause an explosion or a fire. The range of the radio waves is

dependent on conditions in the surrounding environment. In the event of data traffic via a wireless

connection, it is also possible for unauthorised third parties to receive data. TARGA GmbH is not

responsible for radio or television interference caused by unauthorised changes to this device. In

addition, TARGA assumes no responsibility for the replacement or exchange of connecting lines and

devices not indicated by TARGA GmbH. The user is solely responsible for the elimination of

interference caused by such unauthorised changes and for the replacement or exchange of the

devices.

DANGER! Risk of explosion

The device must not be thrown into a fire because the built-in battery may explode.

Note on disconnecting from the mains

Even if you have disconnected the SBR 3.0 A1 (A) from the USB power supply (E), power continues to

be consumed by the USB power supply (E) as long as it is plugged into a mains socket. If necessary,

unplug the USB power supply from the socket to save power.

Maintenance / cleaning

The SBR 3.0 A1 (A) does not contain any parts that require servicing or cleaning. Ensure that the SBR

3.0 A1 (A) does not become dirty. Never open the housing of the device.

WARNING! Clean the SBR 3.0 A1 (A) with a slightly damp cloth if it becomes dirty.

Do not use any solvents, corrosive or gaseous cleaning agents. The SBR 3.0 A1 (A)

could be damaged.

Overview of the controls

1Button

2LED (blue)

3LED (red)

4LED (green)

5LED (yellow)

6Mode selection switch RX-Off-TX

7Micro USB socket

8Audio Out socket (3.5mm)

9Audio In socket (3.5mm)

Prior to use

Take the SBR 3.0 A1 (A) and the accessories out of the package and remove the plastic packaging.

The SBR 3.0 A1 (A) must be fully charged before using it for the first time.

Charging the Bluetooth

audio transmitter/

receiver

To charge the internal battery of the SBR 3.0 A1 (A), connect the micro USB socket (7) via the

supplied USB charging cable (C) to the USB power supply. Insert the USB power supply into a socket

that is always easily accessible. The red LED (3) lights up while charging and goes out when the

battery is fully charged.

Explanation of the RX and TX modes and possible uses

The SBR 3.0 A1 (A) can be used in the following two modes:

1. As receiver in RX mode

In this mode, for example, you can play audio signals from your smartphone via a Bluetooth

connection on your stereo system, which you have already connected to the SBR 3.0 A1 (A) via the

supplied RCA cable (B). Other possible playback devices include, for example, TV or active speakers.

WARNING! Never operate the SBR 3.0 A1 in conjunction with wired headphones.

The use of wired headphones may create harmful sound pressure.

In RX mode, it is imperative that the devices from which the audio signals are transmitted have a

Bluetooth

function.

The many possible uses of the SBR 3.0 A1 depend on the devices which you want to connect. For

further details, please read the operating instructions for your devices.

2. As transmitter in TX mode

In this mode, for example, you can wirelessly transmit audio signals to a Bluetooth

headset or

Bluetooth

loudspeaker from an audio source (for example, TV, stereo system, MP3 player) which

itself does not have Bluetooth

and which you have already connected to the SBR 3.0 A1 via one of

the supplied cables (B, D).

In TX mode, it is imperative that the devices to which the audio signals are to be transmitted have a

Bluetooth

function.

The many possible uses of the SBR 3.0 A1 depend on the devices which you want to connect. For

further details, please read the operating instructions for your devices.

The LED indicators and their meaning

Status of LED indicator Meaning

Blue LED (2) flashes twice power-on procedure

Blue LED (2) flashes three times power-off procedure

Blue LED (2) flashes rapidly and continuously pairing mode (connecting)

Blue LED (2) flashes approx. once per second connection is restored

Blue LED (2) on connected

Blue LED (2) off standby

Red LED (3) on battery is charging

Red LED (3) flashes five times (at one minute intervals) battery capacity low

Red LED (3) off (when connected to power supply) battery fully charged

Green LED (4) on TX mode

Yellow LED (5) on RX mode

First use

Please note that the range of a Bluetooth

connection is restricted. The distance

between transmitter and receiver should thus be 10 metres at most.

To restart the device from standby mode, keep the button (1) pressed for approx. two

seconds.

RX mode (receiver mode)

Device was already connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the RX position, the device tries for approx. 300 seconds

to connect to the known Bluetooth

device and then switches to standby mode. Press the button (1) to

try to connect again for approx. 300 seconds.

If the wireless connection is interrupted during operation, the device tries for approx. 300 seconds to

restore the connection and then switches to standby mode. Press the button (1) to try to connect again

for approx. 300 seconds.

 Insert the 3.5mm jack plug of the supplied RCA cable (B) into the Audio Out socket (8) of the SBR

3.0 A1. Then connect the red plug of the RCA cable (B) to the right RCA audio input and the

white plug to the left RCA audio input of your playback device (for example, stereo system, TV).

Your audio source must have an RCA audio input.

Device was not yet connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the RX position, the device switches to pairing mode until it

is connected or switched off.

 Slide the mode selection switch (6) to the RX position. The yellow LED (5) lights up. The pairing

mode is now activated and the blue LED (2) flashes rapidly and continuously.

If you are asked for a PIN during the pairing process, enter "0000".

 Activate the Bluetooth

function on your smartphone and start searching for Bluetooth

devices.

You will recognise the Bluetooth

audio transmitter/receiver SBR 3.0 A1 by its name "SBR 3.0

A1" in the list of devices which are found. Select it and establish the connection.

 Once the connection is established, the blue LED (2) lights up continuously.

 You can now listen to music files stored on your smartphone via the connected playback device.

 For further details, please read the operating instructions for your playback devices.

TX mode (transmitter mode)

Device was already connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the TX position, the SBR 3.0 A1 tries for approx. 300

seconds to connect to the known Bluetooth

device and then switches to standby mode. If you now

press the button (1), the SBR 3.0 A1 switches to pairing mode for approx. 300 seconds and tries to

connect to a new device.

If the wireless connection is interrupted during operation, the device tries for approx. 300 seconds to

restore the connection and then switches to standby mode. Press the button (1) to try to connect again

for approx. 300 seconds.

 Connect the headphone socket of your audio source (for example, TV, stereo system, MP3

player) via the audio cable (D) to the Audio In socket (9) of the SBR 3.0 A1. If your audio source

has a 6.3mm headphone socket, also use the adapter (F). Attach it first to a plug of the audio

cable (D) and then insert it into the headphone socket of your audio source.

 Alternatively, you can also connect your audio source via the RCA cable (B) to the SBR 3.0 A1

(A). Your audio source must have an RCA audio output. Then connect the red plug of the RCA

cable (B) to the right RCA audio output and the white plug to the left RCA audio output of your

audio source. Insert the 3.5mm jack plug of the RCA cable (B) into the Audio In socket (9) of the

SBR 3.0 A1.

 For further details, please read the operating instructions for your audio source.

Device was not yet connected to a Bluetooth

device:

If you slide the mode selection switch (6) to the TX position, the device switches to pairing mode for

approx. 300 seconds and then switches to standby mode. Press the bu t pairing mode tton (1) to star

again for approx. 300 seconds.

 Now slide the mode selection switch (6) to the TX position. The green LED (4) lights up. The

pairing mode is then activated for approx. 300 seconds and the blue LED (2) flashes rapidly and

continuously.

 Also switch your Bluetooth

playback device (for example, BT headphones or BT loudspeakers)

to pairing mode.

 For further details, please read the operating instructions for your Bluetooth

playback device.

 The two devices in pairing mode (SBR 3.0 A1 and Bluetooth

playback device) then establish a

Bluetooth

connection. When the connection is established, this is indicated by the constant

lighting of the blue LED (2) on the SBR 3.0 A1 (A).

 When the Bluetooth

connection is established, the audio signals of your audio source are

transmitted wirelessly to your playback device and are then played by it.

Resetting the SBR 3.0 A1

To reset the SBR 3.0 A1 (A) and delete the previous connections, slide the mode selection switch (6) to

the RX or TX position. Now keep the button (1) pressed for approx. 5 seconds until the green LED (4)

and the yellow LED (5) flash three times at the same time. The SBR 3.0 A1 is then in pairing mode

again. Please note that resetting the SBR 3.0 A1 deletes both the TX and RX connections.

Storage when not in use

You should recharge the battery regularly if you do not use the device for a prolonged

period of time. This will maintain the performance of the battery.

Store the device in a dry, cool location.

Troubleshooting

The transmission of the audio signal does not work or only poorly

 Make sure that the SBR 3.0 A1 (A) and the audio source or playback device are not too far

apart.

 Make sure that the SBR 3.0 A1 (A) and the audio source or playback device are connected.

 Make sure that the correct socket (Audio In /Audio Out) is used.

 Check whether the internal battery is charged. Charge it if necessary.

 Check whether the mode selection switch (6) is in the correct position.

 Check the volume setting of the playback device.

 Check all cable connections.

Environmental and disposal information

When the crossed out wheelie bin symbol appears on a product, this indicates that the

product is subject to the European Directive 2012/19/EU.

All old electrical and electronic devices must be separated from normal household waste

and disposed of at designated state facilities. The correct disposal of old devices in this

manner will prevent environmental pollution and human health hazards.

For further information about proper disposal, contact your local authorities, waste disposal office or

the shop where you bought the device.

The built-in battery cannot be removed for disposal.

Dispose of the packaging in an environmentally compatible manner. Cardboard can be put out for

municipal paper collections or brought to public collection points for recycling. Films and plastic used

for packaging the device are collected by your local disposal services and disposed of in an

environmentally compatible manner.

Conformity information

This device meets the basic requirements and other relevant regulations of the EMC

Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC, the R&TTE Directive

1999/5/EC, the ERP Directive 2009/125/EC and the RoHS Directive 2011/65/EU.

The complete EU Declaration of Conformity is available on request at:

ce@targa.de

Warranty and servicing advice

Warranty of TARGA GmbH

This device is sold with three years warranty from the date of purchase. Please keep the original

receipt in a safe place as proof of purchase. Before using your product for the first time, please read

the enclosed documentation. Should any problems arise which cannot be solved in this way, please

call our hotline. Please have the article number and, if available, the serial number to hand for all

enquiries. If it is not possible to solve the problem on the phone, our hotline support staff will initiate

further servicing procedures depending on the fault. Within the warranty period the product will be

repaired or replaced free of charge as we deem appropriate. No new warranty period commences if

the product is repaired or replaced. Consumables such as batteries, rechargeable batteries and lamps

are not covered by the warranty.

Your statutory rights towards the seller are not affected or restricted by this warranty.

Service

Phone: 020 – 70 49 04 03

E-Mail: service.GB@targa-online.com

Phone: 01 - 4370121

E-Mail: service.IE@targa-online.com

Phone: 027 78 11 03

E-Mail: service.MT@targa-online.com

Phone: 02 – 20 09 025

E-Mail: service.CY@targa-online.com

IAN: 106958

Manufacturer

TARGA GmbH

Coesterweg 45

59494 SOEST

GERMANY

11/2015 - V 1.7

Varumärken

Ordmärket Bluetooth

och logorna är registrerade varumärken som ägs av Bluetooth SIG, Inc. TARGA

GmbH ändvänder alltid dessa märken under licens.

USB är ett registrerat varumärke.

Övriga namn och produkter kan vara varumärken eller registrerade varumärken som tillhör respektive

ägare.

Inledning

Tack så mycket för att du har valt Bluetooth

ljud-sändaren/-mottagaren SBR 3.0 A1 från SilverCrest, i

fortsättningen kallad SBR 3.0 A1.

Avsedd användning

SBR 3.0 A1 är en enhet som hör till kategorin informationsteknik med vilken du trådlöst kan överföra

ljudsignaler, t.ex. från din stereoanläggning, till ett Bluetooth

Headset. Men det är också möjligt att

trådlöst överföra t.ex. musikfiler från din smartphone till en stereoanläggning och spela upp dem där.

SBR 3.0 A1 är inte avsedd att användas i ett företag resp. för kommersiellt bruk, utan endast för privat

användning. All annan användning är icke avsedd användning. Denna Bluetooth

-enhet uppfyller alla

direktiv och normer som krävs. När en modifikation på Bluetooth

ljud-sändaren/-mottagaren som inte

är överenskommen med tillverkaren genomförs, är uppfyllandet av dessa normer inte längre

garanterat. Tillverkaren tar inget som helst ansvar för skador eller störningar som detta leder till.

Beakta landets föreskrifter resp. lagstiftning i landet där enheten används.

Leveransomfattning

Ta ut enheten och alla tillbehör ur förpackningen. Avlägsna allt förpackningsmaterial och kontrollera

att alla delar finns med och att de är oskadade. Ta kontakt med tillverkaren om leveransen är

ofullständig eller skadad.

A. Bluetooth

ljud-sändare/-mottagaren SBR 3.0 A1

B. RCA-kabel

C. USB-laddningskabel

D. Ljudkabel (3,5mm-kontakt)

E. USB-nätdel

F. Adapter (3,5mm till 6,3mm)

G. Denna bruksanvisning (symbolbild)

Tekniska data

SBR 3.0 A1

Ingångsspänning / -ström 5 V / max. 500mA

Stöder profilerna A2DP

Bluetooth

specifikation V3.0 + EDR

Räckvidd max. 10 meter

Internt laddningsbart batteri Li-Ion 700mAh

Laddningstid (med medföljande USB-nätdel) ca. 8 timmar

Drifttid vid fulladdat batteri min. 8 timmar

Drifttemperatur 0 °C till +40 °C

Luftfuktighet vid drift max. 85 % rel. fuktighet (inte kondenserande)

Dimensioner (B x H x D) ca. 5,9 x 2,4 x 5,9 cm

Vikt ca. 52 g

USB-nätdel

Typ KPTEC / K05S050100G

Ingångsspänning/ingångsström 100 – 240 V , 50/60Hz / 0,2 A

Utgångsspänning/utgångsström 5 V / 1,0 A

Skyddsklass II

Vikt (inkl. USB-kabel) ca. 55 g

De tekniska specifikationerna och designen kan ändras utan förhandsunderrättelse.

Säkerhetsanvisningar

Läs igenom följande anvisningar noggrant innan du använder SBR 3.0 A1 (A) för första gången, även

om du är van att använda elektroniska apparater. Förvara den här bruksanvisningen väl så att du kan

se efter i den längre fram. Ge absolut med den här bruksanvisningen när du ger SBR 3.0 A1 (A)

vidare. Den är en del av enheten.

FARA! Denna symbol med texten "Fara" betecknar en potentiellt farlig situation, som

om den inte förhindras kan leda till allvarliga kroppsskador eller till och med dödsfall.

VARNING! Denna symbol med texten "Varning" betecknar information som är viktig

för säker drift av enheten och för användarens skydd.

Denna symbol varnar för faror som hög ljudstyrka ger upphov till.

Denna symbol betecknar annan viktig information som har med saken att göra.

Användningsförhållanden

SBR 3.0 A1 (A) är inte konstruerad för användning i utrymmen med hög temperatur eller luftfuktighet

eller på extremt dammiga ställen. Drifttemperatur och -luftfuktighet: 0 °C till +40 °C, max. 85 %

relativ luftfuktighet. Att möbelytor eventuellt har behandlats med vårdmedel som kan angripa

gummifötterna på SBR 3.0 A1 (A).

FARA! Se till att

 SBR 3.0 A1 (A) inte utsätts för direkta värmekällor (t.ex. värmeelement), eftersom den kan skadas av

det

 inget direkt solljus eller kraftigt artificiellt ljus träffar SBR 3.0 A1 (A), eftersom den kan skadas av det

 ingen öppen eld (t.ex. brinnande ljus) befinner sig i närheten av eller på SBR 3.0 A1 (A); brandfara

föreligger

 inga främmande föremål tränger in; det finns risk för kortslutning

 kontakt med stänkande eller droppande vatten och aggressiva vätskor undviks och att SBR 3.0 A1

(A) inte används i närheten av vatten och speciellt att den aldrig doppas i vatten (ställ inga föremål

som är fyllda med vätskor, t.ex. vaser eller drycker bredvid eller på SBR 3.0 A1 (A); det finns risk för

brand och kortslutning

 SBR 3.0 A1 (A) inte täcks över när den laddas, eftersom den kan bli varm medan laddningen pågår

 SBR 3.0 A1 (A) omedelbart tas ur drift om det hörs ovanliga ljud eller om rökutveckling uppstår

 SBR 3.0 A1 (A) inte utsätts för kraftiga temperaturvariationer, eftersom luftfuktigheten då kan

kondenseras och orsaka kortslutningar; det finns risk för brand. Om SBR 3.0 A1 (A) trots det har

utsatts för kraftiga temperaturvariationer, vänta (ca. 2 timmar) med idrifttagandet tills den har nått

samma temperatur som omgivningen

 alla kablar alltid dras så, att de inte är i vägen för någon och ingen kan snubbla över dem. Risk för

personskador föreligger

 USB-nätdelen (E) endast ansluts till ett uttag som alltid är lätt tillgängligt och att den inte täcks över.

USB-nätdelen (E) inte öppnas eller vidrörs med fuktiga händer. Risk för livsfarlig elstöt föreligger!

 USB-nätdelen (E) frånskiljs från elnätet vid åskväder. Likaså om ovanliga ljud hörs eller om rök

kommer ut från nätdelen.

FARA! Barn och personer med

funktionsnedsättning

Elektriska apparater i hör inte hemma i barnhänder. Denna enhet kan användas av barn som är 8 år

eller äldre och också av personer med nedsatta mentala, sensoriska eller motoriska förmågor eller

brist på erfarenhet och kunskap, om de övervakas eller instrueras om hur SBR 3.0 A1 ska användas

på ett säkert sätt och förstår vilka risker som är förbundna med detta. Barn bör principiellt övervakas,

för att säkerställa att de inte leker med denna enhet. Barn får inte genomföra rengöring eller

användarservice utan övervakning.

Håll också förpackningsfolien oåtkomlig.

Fara för kvävning föreligger!

FARA! Radiogränssnitt

Stäng av enheten när du befinner dig i ett flygplan, på ett sjukhus, i en operationssal eller i närheten

av medicinska elektroniksystem. Radiovågorna som sänds kan påverka känslig apparaturs funktion.

Håll enheten på minst 20 cm avstånd från en hjärtstimulator resp. en inopererad defibrillator, eftersom

dessa apparaters funktion kan störas av radiovågorna. Radiovågorna som sänds kan orsaka störande

ljud i hörapparater. För inte SBR 3.0 A1 i närheten av antändliga gaser eller i omgivningar med

explosionsrisk (t.ex. målerier) om radiokomponenten är på, eftersom radiovågorna som sänds kan

utlösa en explosion eller brand. Radiovågornas räckvidd är beroende av förhållandena på plats och i

omgivningen. Vid dataöverföring via en trådlös förbindelse är det möjligt för obefogade tredje parter

att ta emot data. TARGA GmbH är inte ansvarig för radio- eller tv-störningar som blir följden av att

obefogade modifikationer har genomförts på enheten. TARGA övertar inte heller något ansvar för

ersättande resp. utbyte av anslutningsledningar och enheter som inte har angetts av TARGA GmbH.

Användaren bär själv ansvaret att åtgärda störningar som orsakats av en sådan obefogad

modifikation och att ersätta resp. byta ut enheterna.

FARA! Explosionsrisk

Enheten får inte kastas i elden eftersom det inbyggda batteriet kan explodera.

Anvisningar gällande frånkoppling från elnätet

Även om SBR 3.0 A1 (A) inte är ansluten till USB-nätdelen (E), förbrukar USB-nätdelen (E) ström så

länge den är ansluten till ett eluttag. Dra i detta fall ut USB-nätdelen ur eluttaget för att spara ström.

Underhåll / rengöring

SBR 3.0 A1 (A) innehåller inga delar som behöver underhåll eller rengöring. Se till att SBR 3.0 A1 (A)

inte blir smutsig. Öppna aldrig apparatens hölje.

VARNING! Rengör SBR 3.0 A1 (A) med en lätt fuktad duk om den blir smutsig.

Använd inga lösningsmedel och inte heller frätande eller gasformiga rengöringsmedel.

SBR 3.0 A1 (A) kan skadas av detta.

Översikt av manöverelementen

1Knapp

2LED (blå)

3LED (röd)

4LED (grön)

5LED (gul)

6Driftlägesomkopplare RX-Off-TX

7Micro-USB uttag

8Audio Out-uttag (3,5mm)

9Audio In-uttag (3,5mm)

Produktspezifikationen

Marke:	SilverCrest
Kategorie:	Kabelloser Audioempfänger
Modell:	SBR 3.0 A1

Brauchst du Hilfe?

Wenn Sie Hilfe mit SilverCrest SBR 3.0 A1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Kabelloser Audioempfänger SilverCrest

SilverCrest SBR 3.0 A1 Bedienungsanleitung

31 August 2024

Bedienungsanleitung Kabelloser Audioempfänger

Kabelloser Audioempfänger Steren

Neueste Bedienungsanleitung für -Kategorien-

Steren POD-144 Bedienungsanleitung

19 August 2024

Steren POD-160 Bedienungsanleitung

17 August 2024