Siemens WT46E3F3EE Bedienungsanleitung

Siemens Trockner WT46E3F3EE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Siemens WT46E3F3EE (16 Seiten) in der Kategorie Trockner. Dieser Bedienungsanleitung war für 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

1 2 3 4 5 6

Emptying condensation

Empty container each drying operation!after

1. Pull out condensation container keeping it horizontal.

2. Pour out condensation.

3. Always push container in fully until it clicks into place.

If limp. depósito (Empty water) flashes in the display panel a What to do

if..., Page 10.

Cleaning the fluff filter

Clean the fluff filter each drying operation.after

1. Open the door, remove fluff from door/door area.

2. Pull out and fold open the fluff filter.

3. Remove the fluff (by wiping the filter with your hand).

If the fluff filter is very dirty or blocked, rinse with warm water and dry

thoroughly.

4. Close and reinsert the fluff filter.

Switching off the dryer

Turn the programme selector to .o (Off)

Do not leave laundry in the dryer.

Removing the laundry

The automatic anti-crease function causes the drum to move at specific intervals, the washing remains

loose and fluffy for an hour (two hours if the additional  menos (Less Ironing) function is also selected-

depending on model).

... and adapt to individual requirements

Never start the dryer if it is damaged!

Inform your after-sales service. Inspecting the

dryer

Sorting and loading laundry

Remove all items from pockets.

Check for cigarette lighters.

The drum must be empty prior to loading.

See programme overview on page 7.

See also separate instructions for “Woollens basket”

(depending on model)

Your new dryer

Congratulations - You have chosen a modern, high-quality Siemens

domestic appliance.

The condensation dryer is distinguished by its economical energy

consumption.

Every dryer which leaves our factory is carefully checked to ensure

that it functions correctly and is in perfect condition.

Should you have any questions, our after-sales service will be pleased

to help.

Disposal in an environmentally-responsible manner

Dispose of packaging in an environmentally-responsible manner.

This appliance is labelled in accordance with the European

guideline 2002/96/EG on waste electrical and electronic

equipment - WEEE.

The guideline provides an EU-wide framework for the return and

recycling of old appliances.

For further information about our products, accessories, spare parts

and services, please visit: www.siemens-home.com

Intended use Preparing for installation, see Page 8

Selecting and adjusting the programme

Drying

Condensation container

Control panel

ʋfor domestic use only,

ʋonly to be used for drying fabrics that have been

washed with water.

Do not leave children unsupervised near the dryer.

Keep pets away from the dryer.

Select the drying programme ...

Press the inicio/stop (start/stop) button

Make sure your hands are dry.

Hold the plug only. Connecting the

mains plug

Drying

Information on laundry ...

Labelling of fabrics

Follow the manufacturer's care information.

(Drying at normal temperature.

'cDrying at low temperature also select .adelicado (Low Heat)

)cDo not machine dry.

Observe safety instructions without fail !aPage 11

Do not tumble-dry the following fabrics for example:

– Impermeable fabrics (e.g. rubber-coated fabrics).

– Delicate materials (silk or curtains made from synthetic material) they may creasea

– Laundry contaminated with oil.

Drying tips

– To ensure a consistent result, sort the laundry by fabric type and drying programme.

– Always dry very small items (e.g. baby socks) together with large items of laundry (e.g. hand

towel).

– Close zips, hooks and eyelets, and button up covers.

Tie fabric belts, apron strings, etc. together

– Do not over-dry easy-care laundry risk of creasing!a

Allow laundry to finish drying in the air.

– Do not dry woolens in the dryer, only use to freshen them up aPage 7, Woollens Finish

Programme (depending on model).

– Do not iron laundry immediately after drying, fold items up and leave for a while the a

remaining moisture will then be distributed evenly.

– Machine-knitted fabrics (e.g. T-shirts or jerseys) often shrink the first time they are dried a

do not use the programme.extra seco para guardar (Cupboard Dry Extra)

– Starched laundry is not always suitable for dryers starch leaves behind a coating that a

adversely affects the drying operation.

– Use the correct dosage of fabric softener as per the manufacturer's instructions when

washing the laundry to be dried.

– Use the timer programme for small loads this improves the drying result.a

Environmental protection/energy-saving tips

– Before drying, spin the laundry thoroughly in the washing machine a the higher the spin

speed the shorter the drying time will be (consumes less energy), also spin easy-care

laundry.

– Put in, but do not exceed, the maximum recommended quantity of laundry a

programme overview .aPage 7

– Make sure the room is well ventilated during drying.

– Do not obstruct or seal up the air inlet.

– Keep the air cooler clean apage 6 “Care and cleaning”.

Drum

All buttons are sensitive and only

need to be touched lightly.

Only operate the dryer with

the fluff filter inserted! Air inlet

Fluff filter

Drum interior light

(depending on model)

Maintenance

flap

Care and cleaning

Dryer housing, control panel, air cooler, moisture sensors

– Wipe with a soft, damp cloth.

– Do not use harsh cleaning agents and solvents.

– Remove detergent and cleaning agent residue immediately.

– During drying, water may collect between the door and seal.

This does not affect your dryer's functions in any way.

Clean the protective filter 5 - 6 times a year

or if flashes after cleaning the fluff filter.limp. filtro (Clean filter)

Air cooler / protective filter

When cleaning, only remove the protective filter. Clean the air cooler

behind the protective filter once a year.

– Allow the dryer to cool.

– Residual water may leak out, so place an absorbent towel

underneath the maintenance door.

1. Unlock the maintenance door.

2. Open the maintenance door fully.

3. Turn both locking levers towards each another.

4. Pull out the protective filter/air cooler.

Do not damage the protective filter or air cooler.

Clean with warm water only. Do not use any hard or sharp-edged

objects.

5. Clean the air cooler thoroughly,protective filter/

Allow to drip dry.

6. Clean the seals.

7. Re-insert the protective filter/air cooler,

with the handle facing down.

8. Turn back both locking levers.

9. Close the maintenance door until the lock clicks into place.

Moisture sensors

The dryer is fitted with stainless steel moisture sensors. The sensors

measure the level of moisture in the laundry. After a long period of

operation, a fine layer of limescale may form on the sensors.

1. Open the door and clean the moisture sensors with a damp sponge

which has a rough surface.

Do not use steel wool or abrasive materials.

Programme end once lights up in the display.

Interrupt programme removing or adding laundry.

The drying cycle can be interrupted for a brief period so that laundry may be added or removed.

The programme selected must then be resumed and completed.

Never switch the dryer off before the drying process has ended.

Drum and door may be hot!

1. Open door, the drying process is interrupted.

2. Load or remove laundry and close door.

3. If required, select a new programme and additional functions.

4. Press the /stop ( /stop) button. inicio start

Contents Page

ʋPreparation . . . . . . . . . . . . . . . . . . . . . . 2

ʋSetting the programmes . . . . . . . . . . . . . 2

ʋDrying . . . . . . . . . . . . . . . . . . . . . . . . 3/4

ʋInformation on laundry . . . . . . . . . . . . . . 5

ʋCare and cleaning . . . . . . . . . . . . . . . . . 6

ʋProgramme overview . . . . . . . . . . . . . . . . 7

ʋInstallation . . . . . . . . . . . . . . . . . . . . . . . . 8

ʋFrost protection / Transport . . . . . . . . . . . 8

ʋTechnical data . . . . . . . . . . . . . . . . . . . . 9

ʋOptional accessories . . . . . . . . . . . . . . . . 9

ʋWhat to do if... / After-sales service . . . . 10

ʋSafety instructions . . . . . . . . . . . . . . . . 11

Additional

functions

Programme selector Time

remaining

Display panel

Clean the fluff filter and/or air cooler page 4/6.a

Empty the condensation container.

limp. filtro

(Clean filter)

limp. depósito

(Empty water)

End of programme in 1*-24 hours (Press button several times if required)

(*depending on the selected programme, e.g. duration 1:54h a 2h. Can always be selected to the

next full hour.)

ˎ

fin (h)

ˎdelicado

(Low Heat)

Reduced temperature for delicate fabrics that require a '

longer drying time; e.g. for polyacrylics, polyamide, elastane

or acetate.

ˎ menos (Less

Ironing)

Reduces creasing and extends the anti-creasing phase once

the program has ended.

ʋ

secar c/cesto

(Woolens Drying

Basket)

Set the drying time for the secar c/cesto (Drying Basket Wool)

programme (see separate instructions.)“Woolens basket“

Only when switched off!

drying

iron dry

cupboard dry

fluff/finished

Service displays

secando/a secar

seco para 

seco para guardar

@/stop

Programme overview also see Page 5

After drying: laundry is to be ...

T-shirt

Shirts

Trousers

Skirts/dresses

Sportswear

Work clothing

Anoraks

Towelling

dressing gowns

Underwear

Socks

Bed linen

Table linen

Terry towels

Tea towels/

towels

c

ironed



lightly ironed dry

not ironed

passed through a mangle

resistentes algod. (Cottons) max. 7 kg For whites and coloureds/cotton or linen.

seco para (Iron Dry) @ ø è* è* è* è* è* è* è* è*

seco para guardar

(Cupboard Dry) @è* è* è* è* è*

extra seco para guardar

(Cupboard Dry Extra) @*è* è* è* è* è*

sintéticos (Easy-Care) max. 3.5 kg For non-iron laundry made of synthetic fibres and blended fabric, cotton.

seco para (Iron Dry)cø@c è* è* è* è* è* è*

seco para guardar

(Cupboard Dry) @è* è*

extra seco para guardar

(Cupboard Dry Extra) @è* è* è*

microfibras (Outdoor) max. 1.5 kg For fabrics with membrane coating, water-repellent fabrics, functional clothing, fleece fabrics (dry jackets/trousers with

removable internal lining separately).

lenceria/lingerie (Dessous) max. 1 kg For lingerie made of synthetic fibres, cotton or blended fabric.

secar c/ cesto

(Drying Basket Wool) max. 1.5 kg Use with separate basket only. See description of “Woolens basket.“

express 40 min max. 2 kg

For laundry made of synthetic fibres, cotton or blended fabrics (for example) that needs to be dried quickly. The values may

differ from the those specified depending on the type of fabric, mixture of laundry to be dried, residual moisture in the fabric

and loading capacity.

Programme time

20 min caliente/quente

(20 min warm)

max. 3 kg For pre-dried, multi-layered, sensitive fabrics made of acrylic fibres, or separate small items of laundry.

Also for subsequent drying.

1110 / 9000549193

*549193* Siemens Electrogeräte GmbH

Carl-Wery-Str. 34

81739 München/Germany

WT46E3F3EE

Installation

– Delivery specification: dryer, instructions for installation and use, woollens basket

(depending on model).

– Check dryer for transport damage.

– The dryer is very heavy. Do not attempt to lift it on your own.

– Be careful to avoid sharp edges.

– Do not lift the dryer by any of the protruding parts (e.g. the door) as they may break off.

– Do not set up in a room that is susceptible to frost.

Freezing water may cause damage.

– If in doubt, have the appliance connected by an expert.

Setting up the dryer

– The appliance plug must always be accessible.

– Ensure that the appliance is installed on a clean, level

and solid surface.

– Keep the cooling grille at the front of the dryer

unobstructed.

– Keep the area around the dryer clean.

– Make the dryer level using the threaded feet

and a spirit level.

Do not remove the threaded feet under any

circumstances.

Mains connection see safety instructions

Page 11.

– Connect to an AC earthed socket. If in doubt have the socket checked by an expert.

– The mains voltage and the voltage shown on the rating plate (

Page 9) must correspond.

– The connected load and necessary fuse protection are specified on the rating plate.

Converting the installed load Note the fuse protection of the socket.

10/16 Amps

Frost protection / Transport

Preparation

1. Empty the condensation container

page 4.

2. Select any programme using the programme selector.

3. Press the /stop ( /stop) button inicio start

condensation is pumped into the container.

4. Wait 5 min., and then empty the condensation container again.

5. Turn the programme selector to .o (Off)

Take all accessory parts

out of the drum.

The drum must be empty.

Make sure that the air

inlet remains unobstructed

Clean and level

turn to o

(Off)

Press and hold selection

then turn 3 x to the right turn to o

(Off)

Set

amperage

1 x to the

right

Feedback: off

off

offoff

flash

flashflashes

eses

1010 A

1616 A

Do not operate the dryer if

there is a danger of frost.

Do not set up the dryer behind a door or sliding

door as this may obstruct or prevent the dryer door

from opening. This will prevent a potentially fatal

danger to children from locking themselves in.

Technical data

ʠDimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)

Weight approximately 45 kg

Max. capacity 7 kg

Condensation container 4.2 l

Connection voltage

Connected load

Fuse protection see appliance rating plate

Ambient temperature

Product number/

Production number

You can find the rating plate on the back of the dryer.

ʠConsumption rates These are guide values determined under standard

conditions. Fluctuations up to 10% are possible. The value

on the label is achieved at the maximum heat setting.

Spin speed in rpm

(residual moisture)

Drying time

in min.**

Energy

consumption

in kWh**

resistentes algod.

(Cottons) 7 kg 10 A 16 A 10 A 16 A

seco para guardar

(Cupboard Dry)*

1400 (approx. 50 %) 112 89 3.36 3.36

1000 (approx. 60 %) 131 104 3.92 3.92

800 (approx. 70 %) 150 120 4.48 4.48

seco para 

(Iron Dry)*

1400 (approx. 50 %) 93 69 2.42 2.42

1000 (approx. 60 %) 111 82 3.06 3.06

800 (approx. 70 %) 130 94 3.70 3.70

sintéticos (Easy-Care) 3.5 kg

seco para guardar

(Cupboard Dry)*

800 (approx. 40 %) 48 42 1.35 1.35

600 (approx. 50 %) 60 51 1.65 1.65

*Test program according to DIN EN 61121.

**The values may differ from the those specified depending on the type of fabric, mixture of

laundry to be dried, residual moisture in the fabric and loading capacity.

ʠDrum interior light (bulb E14, 25 W)(depending on model)

The drum is illuminated after the door is opened or closed, and also after the programme is

started. It goes out automatically. Replacing the bulb

Page 10.

Optional accessories (order from the after-sales service using the order number)

Connection fittings for condensation outlet

The condensation is conveyed directly via a hose.

Washer-dryer stack connection set

The dryer can be placed on top of a suitable washing machine with the same width and depth

to save space.

This connection set always be used to secure the dryer to the washing machine. must

Same as WZ 20310, but with pull-out worktop.

Installation underneath the worktop

Risk of electric shock!

Instead of the appliance covering plate, you must have a metal cover fitted by an expert.

20160

20310

20300

20290

What to do if ...

If you cannot rectify a fault yourself, please contact our after-sales service. We will always find

an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of

the manufacturer and rest assured that the repair will be carried out by trained service

technicians using original spare parts. The contact details of your local after-sales service can

be found in the enclosed after-sales service directory, or by calling one of these numbers:

– 0844 8928999 (GB Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply.)

– 01450 2655 IE

When contacting the after-sales service, please quote the appliance's product number (E no.)

and production number (FD) (see the inside of the door).

Set the programme selector to o (Off) and remove the appliance plug from the socket.

ʠThe /stop ( /stop) inicio start

indicator lamp does not light

up.

Mains plug plugged in?

Programme selected?

ʠThe limp. depósito (Empty

water) inicio start and /stop ( /

stop) indicator lamp flash.

Empty the condensation container.

If featured, check hose for condensation outlet.

ʠThe limp.filtro (Clean filter)

and /stop ( /stop) inicio start

indicator lamp flash.

Clean the fluff filter and/or air cooler

Page 4/6.

ʠDryer does not start. /stop ( /stop) button selected?inicio start

Door closed?

Programme set?

Ambient temperature greater than 5 °C?

ʠWater is running out. Align dryer horizontally.

Clean air cooler seal.

ʠThe door opens by itself. Push the door closed until you hear it engage.

ʠThe required degree of

dryness was not achieved or

the drying time was too long.

Clean the fluff filter and/or air cooler

Page 4/6.

Empty condensation container

Page 4.

Check water outlet (if featured).

Ambient temperature higher than 35 °C

airing.

Air inlet may be blocked

keep unobstructed.

Was an unsuitable programme selected?

Page 7.

Has the dryer been installed with sufficient space on all

sides? Ensure that air can circulate.

Fine layer of scale on the moisture sensors

Clean the

moisture sensors

page 6.

ʠLaundry damp. Use the next drying programme up or use the timer

programme as a supplement

Page 7.

Warm laundry feels damper than it really is!

The moisture content of the room

has increased significantly.

Make sure the room is sufficiently ventilated.

Air inlet blocked?

keep unobstructed.

Ensure that the air cooler has been inserted.

ʠMains failure. Remove laundry from the dryer immediately and spread out.

This allows the heat to dissipate.

ʠOne or more indicator lights for

programme status are

flashing.

Clean filter and air cooler

Page 4/6.

Check installation conditions

Page 8.

Switch off, leave to cool down, switch on again, restart

programme.

ʠThe interior light is not working

(depending on model).

Pull out the appliance plug, remove the cover cap in the

interior above the door (use Torx 20 screw driver) and

replace the bulb. Close the cover cap.

Never operate the dryer without a cover cap.

Safety instructions

Emergency

– Pull the appliance plug out of the socket immediately or disconnect the fuse.

ONLY use the

dryer...

– In rooms inside the house.

– To dry fabrics.

The dryer must

NEVER...

– Be used for other purposes than those described above.

– Be modified in terms of its technology or attributes.

Dangers

– The dryer must not be used by children or persons who have not been

instructed in its use.

– Do not leave children unsupervised near the dryer.

– Keep pets away from the dryer.

– Remove all objects from pockets.

Make especially sure that cigarette lighters are removed as they constitute an

explosion hazard.

– Do not lean or sit on the door

risk of tipping.

Installation

– Secure loose cables

tripping hazard.

– Do not operate the dryer if there is a risk of frost.

Mains

connection

– Connect the dryer according to specifications to an AC earthed socket, as

otherwise it cannot be guaranteed that the appliance is completely safe.

– The cable cross-section must be sufficient.

– Only use earth-leakage circuit breakers with the following symbol:

– The appliance plug and socket must be compatible.

– Do not use multiple plugs/couplings and/or extension cables.

– Do not hold the appliance plug with wet hands

risk of electric shock.

– Never pull the appliance plug out of the socket by its cable.

– Do not damage the mains lead

risk of electric shock.

Operation

– Only load the drum with laundry.

Check the contents before you switch the dryer on.

– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,

grease or paint (e.g. hair setting spray, nail polish remover, stain remover,

cleaning solvent, etc.)

fire/explosion hazard.

– Dust (e.g. coal dust, flour) poses a danger: do not use the dryer

a

explosion hazard.

– Do not put laundry containing foamed material/rubber in the dryer

elastic

material may be destroyed and the dryer may be damaged due to possible

deformation of the foamed material.

– Switch off the dryer once the programme has ended.

– Condensation is not drinking water and may be contaminated with fluff.

Defect

– Do not use the dryer if it is defective or if you suspect it is.

Repairs must only be carried out by the after-sales service.

– Do not use the dryer if the mains cable is defective. To avoid danger, only

have the defective mains cable replaced by the after-sales service.

– Always pull the mains plug out of the socket before changing the bulb for the

interior light

risk of electric shock.

Spare parts

– Only use genuine spare parts and accessories for safety reasons.

Disposal

– Dryer: pull out the appliance plug, cut off the mains cable from the then

appliance.

Dispose of at municipal waste disposal facility.

– Packaging: do not leave children alone with packing parts

risk of suffocation.

– All materials are environmentally sound and can be reused. Dispose of in an

environmentally-responsible manner.

Instructions

for installation and use

Tumble dryer

Observe the safety

instructions on page 11.

Read these instructions

before operating the dryer.

Produktspezifikationen

Marke:	Siemens
Kategorie:	Trockner
Modell:	WT46E3F3EE
Breite:	598 mm
Tiefe:	625 mm
Produktfarbe:	Weiß
Höhe:	842 mm
AC Eingangsspannung:	220 - 240 V
AC Eingangsfrequenz:	50 Hz
Geräteplatzierung:	Freistehend
Energieeffizienzklasse:	B
Startzeitvorwahl:	Ja
Ladetyp:	Frontlader
Anschlusswert:	2800 W
Stromstärke:	16 A
Energieverbrauch:	3.92 kWh
Zykluszeit:	131 min
Nennkapazität:	7 kg
Einschalteverzögerung (max.):	24 h
Türöffnungswinkel:	165 °
Trommelinnenbeleuchtung:	Ja
LED Programm-Kontrollleuchte:	Ja