Siemens RDE100FP Bedienungsanleitung
Siemens
Thermostat
RDE100FP
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Siemens RDE100FP (4 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
1/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
s
I Operating nstructions
RDE100 FP
The RDE100FP rogrammer pis a with 3 "Fil Pilote" zones lectto se Comfort or Economy for different mode
zones at any time.
Note: - The Comfort setpoint must be set directly on each radiator’s thermostat
- T " he radiator’s operating mode must be set to "Automatic
1 Display
Stop mode
Confirmation
Auto Timer mode
F
Room temperature in
degrees Fahrenheit
View and set Auto Timer
Comfort mode
C
Room temperature in
degrees Celsius
Economy mode
Button lock activated
Escape Room temperature
Setting the weekday and
the time ayof d
Display of zone
Holiday mode setting Weekday 1 = Monday
Weekday 7 = Sunday
T ime of day
Timer bar
Morning: 12 hour format-
Afternoon: 12 hour format-
Current room
temperature
2 Change operating mode
3 Set
4 Ok
5 Decrease zone value
6 Increase zone value
Do you want to the time of day set and the weekday?
Set
Ok
+
–
Mode
!
Proceed as follows:
• Press Set and select
• Press Ok and the time of day flashes for setting
• Press + – or to set the time of day
• Press Ok to confirm
• W ; eekday flashes press + – or to select the weekday
• Press Ok to save
• Press M ode to exit or wait for the program to exit automatically
Note:
In the event of power failure followed by power restoration the time of day that the a , flashes means , which user
must adjust it repeat the steps from point 3 above. and
All others setting are saved.
Until the time , the program sends protection all available zones. setting made is commands to
Do you want to lock the buttons?
M Mode Press and hold ode for at least 7 seconds to activate a button lock. Repeat to unlock.
The unit operates normally when the buttons are locked, but changes cannot be made.
Do you want to set your Holiday mode?
Set
Ok
+
–
M ode
!
You can enable Holiday zone mode for all s .The radiator managed by the programmer controls the room
temperature with the rotection setpoint. P
• Press Set and select
• Press Ok to confirm
• Press + – or to set s m the number of days for holiday (0 = Holiday ode Off)
• Press Ok to save
• When Holiday mode is activated, the remaining days are displayed
Note:
If M ode e .is pressed while Holiday mode is , the function active is deactivated and th symbol disappears
Energy saving tips without loss of comfort
• T Select Auto imer mode during the heating period and set the time switch as desired
• - Select Economy or Holiday mode for longer periods of non occupancy and during the summer
2/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
Do you want to change the operating mode?
Mode
+
–
!
For each zone (1, 2 or 3), the unit allows you
to select Comfort, Economy or automatic
mode.
Press + – or z 3; , to select one 1, 2 or then
select the mode using the operating Mode
button.
Comfort mode is the permanent (24 h)
selection of Comfort. Select this operating
mode to maintain Comfort temperature the
without time switch during occupancy (e.g.
periods).
Economy mode is the permanent (24 h)
selection of Economy. Select this operating
mode to maintain Economy temperature the
without time switch (e.g. during the summer
when heating is is used forO )ff . It non-
occupancy periods when you want to
maintain the Economy temperature e.g. at (
night).
AUTO
In Auto Timer mode, the operating
modes (Comfort, Economy) are changed
automatically according to the time switch
settings.
Note:
Stop mode is a special mode when all
" " Fil Pilote stop signals are sent to all valid
and active zones. During Stop mode, you
can only do tasks, either 2 make parameter
settings or the weekday and set the of time
day. When Stop mode is enabled, the zone
number disappears.
You can enable the number of zones via
parameter settings (P18); the default value
is 3.
Do you want to enter your own time switch?
Option 1: Time switch with individual day settings
(P11=0)
Set
Ok
+
–
M ode
!
For the selected zone, you can select
Comfort or Economy mode 15 minute in -
steps throughout the day. The 0:00 to 24:00
hour time bar allow you to ses lect the
operating mode the respectivefor day(s).
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
When Auto imer mode is enabled, T
changeover between the operating modes is
automatic after the settings are saved.
Proceed as follows:
1) Press + – or to select the zone.
2 ) Press Set and select
AUTO
.
3 ) Press Ok to confirm.
4 T . ) ime switch for Mon (1) is displayed
5) Press + – or to select the day,
from Mon (1) to Sun (7).
6 ) Press O k to confirm the selection and
initiate time programming.
During programming:
7 ) Press Mode to select the operating
mode (Comfort or Economy) or
8) Press + – or to set the time 15 of day in -
minute teps operating s for the selected
mode.
9 ) Press Ok to save the time switch.
10) Repeat remaining days (if steps 5-9 for all
re or quired),
11) Press Mode or wait for the program to exit
automatically.
Note:
Repeat the above steps to program the
remaining zones.
3/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
Option 2: Time switch with the ttingssame 7 day se-
(P11=1)
Set
Ok
+
–
M ode
!
You can set that all the time switch so
settings apply to the 7 weekdays .
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press + – or to select one.the z
2) Set the parameter (P11=1). Please refer
to section "Do you want to change
parameters".
3 ) Press Set and select
AUTO
.
4 ) Press Ok to confirm.
5 – ) Time switch for Mon (1) Sun (7) is
displayed.
6 ) Press Ok to initiate time programming.
During rogrammingp :
7 ) Press Mode to select the operating mode
(Comfort or Economy) or
8) Press + – or to set the time 15 of day in -
minute steps operating for the selected
mode.
9 . ) Press Ok to save the settings
10 to ) Press Mode or wait the program for
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Information on the standard "F P " il ilote –
s etpoints
The RDE1001FP is a programmer to manage the used
operating modes.
The setpoints are managed by your electrical radiators or
heaters.
. Please refer respective Oto the perating Instructions
According to the standard:"F P " il ilote
The Comfort setpoint must be set directly on the
thermostat of electrical radiator or heater.the
The Economy setpoint is 3 °C below the Comfort
setpoint.
The edProtection setpoint is fix at 7 or 8 . °C
Option 3: Time switch with 5-2-day settings
(P11=2)
Set
Ok
+
–
M ode
!
You can set Monday Friday and Saturday - -
Sunday at the same time.
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press + – or to select the zone.
2) Set the parameter (P11=2). Please refer
to section ou want to change "Do y
parameters?".
3) Press Set and select
AUTO
.
4) Press Ok to confirm.
5) Time switch for Mon – (1) Fri (5) is
displayed.
6) Press + – or to select Mon – (1) Fri (5) or
Sat Sun – (6) . (7)
7) Press Ok to confirm the selection and
initiate time programming.
During programming:
8) Press Mode to select the operating mode
(Comfort or Economy), or
9) Press + – or to set 15 the time of day in -
minute steps operating for the selected
mode.
10) Press to save the Ok settings.
11) Repeat step 10 for the other period if s 6-
necessary, otherwise
12) Press or wait for the program to Mode
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Factory default for 7- t day ime switch
Default
value
Day/s Comfort mode Economy mode
Mo (1) –
Fr (5)
6:00 – 8:00 hr
17:00 – 22:00 hr
22:00 – 6:00 hr
8:00 – 17:00 hr
Sa (6) –
Su (7)
– – 7:00 22:00 hr 22:00 7:00 hr
Produktspezifikationen
| Marke: | Siemens |
| Kategorie: | Thermostat |
| Modell: | RDE100FP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Siemens RDE100FP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostat Siemens
16 Oktober 2024
7 Oktober 2024
5 Oktober 2024
3 September 2024
1 September 2024
30 August 2024
30 August 2024
29 August 2024
28 August 2024
28 August 2024
Bedienungsanleitung Thermostat
- Thermostat Basetech
- Thermostat Hama
- Thermostat Nedis
- Thermostat SilverCrest
- Thermostat Panasonic
- Thermostat Brennenstuhl
- Thermostat Cotech
- Thermostat Bosch
- Thermostat AEG
- Thermostat ATAG
- Thermostat Taurus
- Thermostat Velleman
- Thermostat Devolo
- Thermostat Alecto
- Thermostat Conrad
- Thermostat EMOS
- Thermostat Gira
- Thermostat HomeMatic
- Thermostat Renkforce
- Thermostat Technoline
- Thermostat TFA
- Thermostat Schneider
- Thermostat Corberó
- Thermostat GE
- Thermostat King
- Thermostat Avidsen
- Thermostat Elro
- Thermostat Tesla
- Thermostat Max
- Thermostat Perel
- Thermostat Nexa
- Thermostat Vasco
- Thermostat Fenix
- Thermostat Westfalia
- Thermostat Vaillant
- Thermostat Honeywell
- Thermostat Remko
- Thermostat Junkers
- Thermostat RADEMACHER
- Thermostat AVM
- Thermostat ELV
- Thermostat TP-Link
- Thermostat Zehnder
- Thermostat Lux
- Thermostat De Dietrich
- Thermostat Netatmo
- Thermostat Theben
- Thermostat Tado
- Thermostat Remeha
- Thermostat Saunier Duval
- Thermostat Stiebel Eltron
- Thermostat Truma
- Thermostat Viessmann
- Thermostat Xavax
- Thermostat Hager
- Thermostat Dimplex
- Thermostat Buderus
- Thermostat Noma
- Thermostat JUNG
- Thermostat Boneco
- Thermostat Hunter
- Thermostat Baxi
- Thermostat Wolf
- Thermostat Nest
- Thermostat Magnum
- Thermostat HQ
- Thermostat Itho Daalderop
- Thermostat Carrier
- Thermostat Tylö
- Thermostat Busch-Jaeger
- Thermostat SPC
- Thermostat Gree
- Thermostat Sygonix
- Thermostat Orbis
- Thermostat Econo-heat
- Thermostat EQ-3
- Thermostat RWE
- Thermostat Eberle
- Thermostat BTicino
- Thermostat Bulex
- Thermostat Danfoss
- Thermostat Delta Dore
- Thermostat Fantini Cosmi
- Thermostat Grässlin
- Thermostat Heimeier
- Thermostat IMIT
- Thermostat Klafs
- Thermostat Oventrop
- Thermostat Salus
- Thermostat Seitron
- Thermostat EVE
- Thermostat Ariston Thermo
- Thermostat Elektrobock
- Thermostat Intertechno
- Thermostat Mikoterm
- Thermostat Ferroli
- Thermostat Carel
- Thermostat Daikin
- Thermostat Vemer
- Thermostat EnerGenie
- Thermostat Oregon Scientific
- Thermostat Finder
- Thermostat Homematic IP
- Thermostat Levoit
- Thermostat EQ3
- Thermostat Google
- Thermostat Somfy
- Thermostat Elgato
- Thermostat Elco
- Thermostat Devi
- Thermostat Drayton
- Thermostat Drayton Erie
- Thermostat Easy Timer
- Thermostat EasyTemp
- Thermostat Eliwell
- Thermostat Emerson
- Thermostat Emmeti
- Thermostat Enda
- Thermostat Eneco
- Thermostat Eqiva
- Thermostat Essent
- Thermostat Etherma
- Thermostat Eurotronic
- Thermostat Extraflame
- Thermostat Frico
- Thermostat Go Green
- Thermostat Helios (Amfra)
- Thermostat Hornbach
- Thermostat Hugo Muller
- Thermostat ICY
- Thermostat IR-V
- Thermostat Itho
- Thermostat Johnson Control
- Thermostat Landis Gyr
- Thermostat Levica
- Thermostat Lowes
- Thermostat Muller
- Thermostat Nefit
- Thermostat Niko
- Thermostat Nobo
- Thermostat OJ ELECTRONICS
- Thermostat Otio
- Thermostat Plieger
- Thermostat Plugwise
- Thermostat Radson
- Thermostat THERMAFLEX
- Thermostat Thermy
- Thermostat ACV
- Thermostat Hive
- Thermostat UPM
- Thermostat VDH
- Thermostat Wachendorff
- Thermostat Watts
- Thermostat Webasto
- Thermostat Weishaupt
- Thermostat Worcester-Bosch
- Thermostat Yokis
- Thermostat Z-Wave
- Thermostat Vimar
- Thermostat TrickleStar
- Thermostat Horstmann
- Thermostat Computherm
- Thermostat Heatit
- Thermostat POER
- Thermostat H-Tronic
- Thermostat PECO
- Thermostat Chacon
- Thermostat Emko
- Thermostat Fibaro
- Thermostat Heatmiser
- Thermostat Crestron
- Thermostat ORNO
- Thermostat Optima
- Thermostat HomePilot
- Thermostat Krone
- Thermostat ChiliTec
- Thermostat Arnold Rak
- Thermostat Ouellet
- Thermostat Jumo
- Thermostat Wallair
- Thermostat Maico
- Thermostat Ecobee
- Thermostat Tellur
- Thermostat STI
- Thermostat Cepra
- Thermostat Tru Components
- Thermostat Qubino
- Thermostat Gewiss
- Thermostat Warmup
- Thermostat Sinustec
- Thermostat Rose LM
- Thermostat Agpo Ferroli
- Thermostat Amfra
- Thermostat Aube
- Thermostat AWB
- Thermostat Wattio
- Thermostat Brink
- Thermostat 2Heat
- Thermostat Bryant
- Thermostat Veria
- Thermostat Innogy
- Thermostat ELKO
- Thermostat MundoControl
- Thermostat Bearware
- Thermostat GENERAL Life
- Thermostat Oreg
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024