Siemens A70 Bedienungsanleitung

Siemens Smartphone A70

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Siemens A70 (16 Seiten) in der Kategorie Smartphone. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

Overview of the phone

1Display indicators

Signal strength and battery level.

2Soft keys

Press the soft key to call up the function

that is displayed as §Text§ or icon on the

grey fields above the key.

3ACall key

Dial displayed phone number or name,

accept calls. In standby mode: Display the

last calls.

4BOn/Off/End key

• Switched off: press and hold to

switch on.

• During a conversation or in an

application: press briefly to finish.

• In menus: press briefly to go back a

level. Press and hold to return to

standby mode.

• In standby mode: press and hold to

switch off phone.

5 Control key

• In standby mode:

FOpen Phonebook.

• :During conversation

ESt sa t adjur tin e lu e th s t g th vo m en e

volu e im w thG.

6*Press and hold

• In standby mode: switch on/off all sig-

nal tones (except alarm).

• For incoming calls: only switch off ring

tones.

7'Press and hold

In standby mode: switch key lock on/off.

_ g

Service provider

1 .0 2 0 0 :7 6. 0 5 9 15

N SMew S M uen

A70

A70A70

Getting started

Using the SIM card/battery

Your phone's display is delivered with a

protective film. Remove this film before get-

ting started. The service provider supplies

you with a SIM card on which all the im-

portant data for your account is stored. If

the SIM card is credit card-sized, snap out

the smaller segment and trim any rough

edges.

Remove the battery cover upwards 1.

Insert SIM card 2 and push it fully into

the locating slot (make sure the angled

cor er is in th cor e t si ion e r c po t n 3). T e h n

push the retaining catch over the top of

the SIM card 4.

Insert the battery sideways into the

phone 5, then press downwards 6

until it engages.

To remove, press the retaining tab 7

then lift the battery out.

Insert the battery cover by the tabs at the

bottom 8, then press downwards 9,

until it engages.

Always switch off phone before removing

the battery!

Only 3V SIM cards are supported. Please

contact your service provider if you have

an older card.

Charge battery

The battery is not fully charged when de-

livered. Plug in the charger cable at the

bottom of the phone, plug in the power

supply unit to the mains power socket

and charge for at least two hours.

Switch on/off, PIN entry

anguage: en2; VAR issue date: 050331

Charging time

The charging time is 2 hours. Ambient

temperature of 5 °C to 40 °C (icon flashes

as a warning when 5 °C above/below this).

Switch on/off, PIN entry

Switch on/off

Press and hold On/Off/End keyBto

switch on or off.

Enter PIN

The SIM card can be protected with a

4 - 8 digit PIN. Enter the PIN code using

the number keys (the display shows a se-

ries of asterisks, if you make a mistake

press §Clear§). Confirm your input with §OK§.

Logging on to the network will take a few

seconds.

First time switching on phone, the time

and date must be set.

Standby mode

When the name of the service provider/

logo appears on the display, the phone is

in standby mode and ready for use.

Press and hold the On/Off/End key Bto

return to standby mode from any menu

option.

Security

The phone and SIM card are protected

against misuse by several security codes.

Keep these confidential numbers in a safe

place where you can access them again if

required.

§Menu§ ¢Setup ¢Security ¢Codes

¢Select a function.

PIN control

The PIN is usually requested each time

the phone is switched on. You can deacti-

vate this feature but you risk unauthor-

ised use of the phone. Some service pro-

viders do not permit deactivation of the

control.

Change PIN

You can change the PIN to any 4 - 8 digit

number you may find easier to remember.

Change PIN2

(Displayed only if PIN 2 is available.)

Proceed as with Change PIN.

Change phonecode

You define and enter the phone code

(4 - 8 digits) when calling a phone code

protected function (e.g. Direct call, p. 4)

for the first time. It is then valid for all

protected functions. If it is entered incor-

rectly three times the phone is locked.

Contact the Siemens Service.

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter the

PUK (MASTER PIN) provided by your serv-

ice provider with the SIM card. If the PUK

(MASTER PIN) has been lost, please con-

tact your service provider.

Prevent accidental activation

Even if PIN use is deactivated (p. 3) con-

firmation is required to switch on the

phone.

This prevents accidental activation of the

phone, e.g. when you are carrying it in a

bag or when you are travelling in an

aircraft.

After pressing and holding the On/Off/End

keyBselect §OK§ to switch on the phone

or abort the operation with §Cancel§.

Making a phone call

Dialling with number keys

The phone must be switched on (standby

mode). Enter the number (always with

prefix, if necessary with the international

dialling code). Press §Clear§ to clear the last

digit, press and hold to clear the entire

phone number. To dial press the Akey.

Produktspezifikationen

Marke:	Siemens
Kategorie:	Smartphone
Modell:	A70
Touchscreen:	Nein
Anzahl der Farben des Displays:	4096 Farben
FM-Radio:	Nein
Freisprecheinrichtung:	Nein
IM (Instant Messaging):	Nein
Bluetooth:	Nein
Akku-/Batteriekapazität:	650 mAh
Breite:	45 mm
Tiefe:	20 mm
Gewicht:	78 g
Produktfarbe:	Grau
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	101 mm
Telefonbuch Kapazität:	250 Eintragungen
Formfaktor:	Balken
RAM-Speicher:	0 MB
Rückkamera:	Nein
Funkfrequenz:	900, 1800, 1900 MHz
Klingeltontyp:	Polyphonisch
Netzwerkanschlußtyp:	GSM
Infrarotport:	Nein
Flashkartenunterstützung:	Nein
Java Technologie:	Nein
MMS (Multimedia-Nachrichtenübermittlung Service):	Nein
Chat:	Nein
Sprechzeit (2G):	5 h
Standby-Zeit (2G):	250 h
Persönliches Infomanagement (PIM):	Taschenrechner
Vibrationsalarm:	Ja
Display-Auflösung:	101 x 64 Pixel