Shimano FH-M3050 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Shimano FH-M3050 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Jan. 2022 by SHIMANO INC. ITP
UM-3TK0A-005-00 User's manual
Rear Freehub
(for Disc Brake)
User's manuals in other languages are available at :
https://si.shimano.com
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on installation,
adjustment, and replacement of the products which are not found in the user's
manual. A dealer's manual for professional and experienced bicycle mechanics is
available on our website (https://si.shimano.com).
For safety, be sure to read this user's manual thoroughly
before use, follow it for correct use, and store it so that it
can be referenced at any time.
Important Safety Information
For replacement information, contact the place of purchase or a bicycle dealer.
WARNING
Do not disassemble or modify the product. This may cause the product to not
operate correctly, and you may suddenly fall and be seriously injured.
Check that the wheels are fastened securely before riding the bicycle. If the
quick release lever is not used correctly, the wheel may come off the bicycle
and result in serious injury due to a fall or collision.
Make sure that, even if the quick release lever is
tightened as much as possible, the quick release lever
does not interfere with the disc brake rotor. If the
quick release lever is on the same side as the disc
brake rotor, there is the danger that it may interfere
with the disc brake rotor. If the quick release lever
interferes with the disc brake rotor, immediately stop
use and contact the place of purchase or a distributor.
Quick release
lever
Disc brake
rotor
NOTICE
This product is not warranted against damage resulting from improper use, such
as jumping while riding or if the bicycle falls over, except if such malfunctions
are caused by manufacturing methods.
Products are not guaranteed against natural wear and deterioration from
normal use and aging.
For maximum performance we highly recommend SHIMANO lubricants and
maintenance products.
Use only the lubricants specified by SHIMANO in the dealer's manual.
Do not apply any oil to the inside of the hub, otherwise the grease will come
out.
If the wheel becomes stiff and difficult to turn, lubricate it with grease.
If the quick release lever can be easily pushed to the CLOSE position, this means
the clamping strength is insufficient. Return the quick release lever to the
position perpendicular to the bicycle frame and again turn the adjusting nut
clockwise to increase the clamping strength. Push the quick release lever back to
the CLOSE position.
Adjusting nut
If the clamping strength is adjusted too strong and the quick release lever
cannot be pushed to the CLOSE position, turn the adjusting nut in a counter-
clockwise direction to reduce the clamping strength. When doing this, do not
fully release the adjuster nut. Turn it 1/8 of a revolution, and then try to push
the lever to CLOSE, to set the maximum clamping strength with which
you can push the quick release lever to the CLOSE position.
Turn 1/8 revolution
at a time
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found
with the following items, contact the place of purchase or a bicycle dealer.
Are the wheels fixed?
Do the wheels rotate smoothly?
Are there any abnormal noises?
Names of parts
Quick release lever
Rear freehub
What is a Quick Release?
It is a mechanism that uses a single quick release lever operation on the hub to
enable the wheel to be easily installed and removed.
Quick Release function
When the quick release lever is brought to the closed position, the lever nut moves
inward. The force of this clamps the wheel to the frame and holds the wheel
securely in place.
CLOSE position
Open position
Adjusting nut
Lever nu
Quick release lever
Adjust the clamping strength by turning the adjusting nut. Turning the nut
clockwise increases the clamping strength, and turning the nut counterclockwise
decreases the clamping strength.
Adjusting nut
Weaker
Stronger
Suitable dimensions of the rear end
Be sure to use only rear end widths with suitable dimensions.
Cannot use fork thicknesses less than 6 mm.
Operation
How to fasten this quick release hub
1. Move the quick release lever to the OPEN position and set the wheel so it firmly
touches the interior of the rear end (See sketch below).
O sition
OK Not OK
2. Open and close the quick release lever with one hand while gradually
tightening the adjusting nut clockwise with the other hand. When closing the
lever, continue to tighten the nut until you feel resistance with your hand that
is closing the lever while raising the lever until it reaches a position that is
parallel to the hub axle (at the position indicated with dashed lines in the figure
below).
Adjusting nut
Quick release lever
3. Grip the rear end with your fingers and use the palm of your hand to close the
quick release lever with as much strength as possible. When closed, the quick
release lever must be in the "CLOSE" position shown below in the diagram on
the right. The side of the lever with the inscription "CLOSE" must be facing
away from the bicycle, and the lever should be parallel to the rear end as shown
below in the diagram on the left.
Tightening torque:
5 -7.5 N·m
Rear end
Quick
release
lever
CLOSE position
CAUTION
Do not attempt to secure the wheel to the frame
by rotating the quick release lever as shown in
the figure. The wheel will not be secured to the
frame and may come off the bicycle, resulting in
serious injury.
Positioning of the quick release lever
For safety, the quick release lever should be along the bicycle frame when in the
CLOSE position.
Removing the wheel
Move the quick release lever from the CLOSE position to the OPEN position.
And then remove the wheel.
OPEN position


Produktspezifikationen

Marke: Shimano
Kategorie: Nicht kategorisiert
Modell: FH-M3050

Brauchst du Hilfe?

Wenn Sie Hilfe mit Shimano FH-M3050 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Shimano

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-