Sharpal 191H Bedienungsanleitung
Sharpal
Messerschärfer
191H
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharpal 191H (3 Seiten) in der Kategorie Messerschärfer. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
User Manual
Item No. 191H
BEFORE SHARPENING:
Place the sharpener on a at surface. (See Fig. 1)
To prevent the sharpener and table from being cut by knife or scissors, place the sharpener as close as possible to the
table edge while sharpening. (See Fig. 2)
Press down the black lever securing the sucon pad on surface. When you nish sharpening, pull the lever up, the
sharpener will be separate from the table. (See Fig. 3)
KNIFE SHARPENING INSTRUCTION:
Knife includes all knives of double-beveled edge. This sharpener is not suitable for single-beveled edge knives.
1. Insert blade fully and vercally into appropriate sharpening slot at a 90-degree angle to the sharpener. Gently pull
the knife blade with light pressure from heel to p in direcon of indicator arrows. (See Fig. 4)
No. V-Notch slot (Coarse CARBIDE) - Quickly set a new edge1
No. V-Notch slot (Fine CERAMIC) - Hone for a smooth nished edge2
Note: Light pressure is sucient when using the knife sharpener. Heavy pressure might cause to lose control of the
knife and could cause possible injury. Carefully and gradually increase pressure unl the desired result is achieved.
The No. CERAMIC slot is for ne honing of slightly dull edge. The The No. CARBIDE slot is for dull or damaged edge2 1
that requires new edge seng. Try to sharpen with No. CERAMIC slot rstly for your valuable knives.2
Use No. 2 CERAMIC slot only to sharpen your serrated edge knife. (See Fig.5)
2. Repeat above acon unl blade is sharp. Always pull the blade through the sharpening slot from heel to p,
never back and forth.
SCISSORS SHARPENING INSTRUCTION:
Note: Scissors blades are single-beveled, only sharpen the side of each blade that has a bevel.
Open your scissors and lay the edge to be sharpened of the beveled side of one blade across the carbide sharpening
blade, which is located above the scissors’ icon. Place the open hinged scissors blade all the way up to the horizontal
carbide sharpening blade, and make sure that the scissors blade is angled to make the bevel side of scissors blade fully
lean on the horizontal carbide sharpening blade.
1. With light pressure pull the blade in the direcon of the arrow with a downward moon all the way through the
sharpener following the preset angle on the scissors. (See Fig. 6) Repeat this process several mes unl you
achieve a sharp edge. This may take several passes and you may need to increase your pressure during this
process. .Do not push the scissors blade over the sharpening blade
2. Repeat the above steps for the second scissors blade.
3. Aer sharpening the scissors’ edge, there are specic rough burrs of metal across the sharpened edges of the
blades. Burrs can quickly be removed by seng the scissors back together, and opening and closing them a few
mes.
MAINTENANCE:
1. Clean the exterior with a damp so cloth.
2. Oil or other lubricang liquid is not necessary.
CAUTION: Recommend to wear gloves when sharpening a blade with this product. No need to place free hand on
top of the sharpener during use.
WARNINGS: This product is not a toy. Keep out of the reach of children.
*Watch its demo video on YouTube:
bit.ly/191video
Or scan QR code
*If you want to read the user manual in Spanish and French, please go to SHARPAL website to download it.
www.sharpal.com
*Each SHARPAL product is warranted to be free from defects in material and workmanship for 3 years from the
date of purchase under normal wear and tear, except for damage caused by misuse or alteration. THIS WARRANTY
APPLIES ONLY TO NON-INDUSTRIAL OR NON-COMMERCIAL USE. If you want to make a warranty claim, please
contact us through SHARPAL website or send an email directly to warranty@sharpal.com.
Produktspezifikationen
| Marke: | Sharpal |
| Kategorie: | Messerschärfer |
| Modell: | 191H |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sharpal 191H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messerschärfer Sharpal
5 September 2024
Bedienungsanleitung Messerschärfer
- Messerschärfer Clatronic
- Messerschärfer Domo
- Messerschärfer SilverCrest
- Messerschärfer Adler
- Messerschärfer Beper
- Messerschärfer Guzzanti
- Messerschärfer Princess
- Messerschärfer Ambiano
- Messerschärfer Bifinett
- Messerschärfer Fagor
- Messerschärfer Gastroback
- Messerschärfer Melissa
- Messerschärfer Steba
- Messerschärfer Studio
- Messerschärfer IKEA
- Messerschärfer Blokker
- Messerschärfer Graef
- Messerschärfer Trebs
- Messerschärfer Waring Commercial
- Messerschärfer Bartscher
- Messerschärfer Tacklife
- Messerschärfer Orava
- Messerschärfer Livoo
- Messerschärfer Güde
- Messerschärfer Dedra
- Messerschärfer Champion
- Messerschärfer OBH Nordica
- Messerschärfer Genie
- Messerschärfer Salter
- Messerschärfer Powerplus
- Messerschärfer Presto
- Messerschärfer Sogo
- Messerschärfer Ozito
- Messerschärfer Gourmetmaxx
- Messerschärfer Petra Electric
- Messerschärfer IdeenWelt
- Messerschärfer EdgeCraft
- Messerschärfer Gardenline
- Messerschärfer Tower
- Messerschärfer C3
- Messerschärfer Berkel
- Messerschärfer KitchenIQ
- Messerschärfer GARDE
- Messerschärfer For_Q
- Messerschärfer Wüsthof
- Messerschärfer Work Sharp
- Messerschärfer Chef's Choice
- Messerschärfer Brentwood
- Messerschärfer Donau Elektronik
Neueste Bedienungsanleitung für -Kategorien-
12 Oktober 2024
7 Oktober 2024
6 Oktober 2024
18 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
3 September 2024
3 September 2024