Sharp PGF-267X Bedienungsanleitung

Sharp Videostrahl PGF-267X

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharp PGF-267X (34 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

MODEL

PG-F267X

DATA PROJECTOR

SETUP MANUAL

Connecting Pin Assignments .............................. 2

RS-232C Speciﬁ cations and Commands ........... 4

Setting up the Projector Network Environment

... 9

1. Connecting the Projector to a Computer ...........10

2. Setting an IP Address for the Computer ............11

3. Setting up a Network Connection for the

Projector .......................................................13

Controlling the Projector via LAN ..................... 15

Controlling the Projector Using Internet Explorer

(Version 5.0 or later)......................................15

Conﬁ rming the Projector Status (Status) ................16

Controlling the Projector (Control) ..........................16

Setting and Adjusting the Projector

(Settings & Adjustments) ..............................17

Setting the Security (Network – Security) ...............17

Making General Settings for the Network

(Network – General) .....................................18

Setting for Sending E-mail when an Error Occurs

(Mail – Originator Settings) ..........................18

Setting Error Items and Destination Addresses

to which E-mail is to be Sent when an

Error Occurs (Mail – Recipient Settings) ......19

Setting Error Items and the URL that are to be

Displayed when an Error Occurs

(Service & Support – Access URL) ...............19

Setting up the Projector Using RS-232C or

Telnet .......................................................... 20

When Connecting Using RS-232C .........................20

When Connecting Using Telnet ..............................21

SETUP MENU (Main Menu) ....................................22

ADVANCED SETUP MENU ....................................22

View Setting Detail List ([V]View All Setting) ...........23

Set Items ................................................................23

Save Settings and Quit ([S]Save & Quit) .................24

Quit without Saving Settings ([Q]Quit Unchanged)

...24

IP Address Setting ([1]IP Address) .........................25

Subnet Mask Setting ([2]Subnet Mask) ..................25

Default Gateway Setting ([3]Default Gateway) .......25

User Name Setting ([4]User Name) ........................25

Password Setting ([5]Password) .............................26

RS-232C Baud Rate Setting

([6]RS-232C Baud Rate) ...............................26

Projector Name Setting ([7]Projector Name) ..........26

DHCP Client Setting ([8]DHCP Client) ....................26

Disconnecting All Connections

([D]Disconnect All) ........................................27

Entering ADVANCED SETUP MENU

([A]Advanced Setup) .....................................27

Setting Auto Logout Time

(ADVANCED[1]Auto Logout Time) ................27

Data Port Setting (ADVANCED[2]Data Port) ...........27

Carrying out Network Ping Test

(ADVANCED[5]Network Ping Test) ...............28

Setting of Accept IP Address (ADVANCED

[6]Accept IP Addr(1) – [8]Accept IP Addr(3))

..28

Accepting All IP Addresses

(ADVANCED[9]Accept All IP Addr) ...............28

Setting of Search Port

(ADVANCED[0]Search Port) ..........................29

Return to Default Settings

(ADVANCED[!]Restore Default Setting) ........29

Return to Main Menu

(ADVANCED[Q]Return to Main Menu) ..........29

Resetting the Lamp Timer of the Projector

via LAN ....................................................... 30

Troubleshooting .................................................. 32

-2

Connecting Pin Assignments

COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals: mini

D-sub 15 pin female connector

COMPUTER Input/Output COMPUTER Input/Output

Pin No. Signal Pin No. Signal

10.

11.

12.

13.

14.

15.

Video input (red)

Video input (green/sync on green)

Video input (blue)

Not connected

Earth (red)

Earth (green/sync on green)

Earth (blue)

Not connected

GND

Not connected

Bi-directional data

Horizontal sync signal: TTL level

Vertical sync signal: TTL level

Data clock

10.

11.

12.

13.

14.

15.

PR (CR)

PB (CB)

Not connected

Earth (PR)

Earth (Y)

Earth (PB)

Not connected

DVI-I Terminal: 29 pin connector

DVI Digital Input•

Pin No. Signal Pin No. Signal

10.

11.

12.

13.

14.

15.

T.M.D.S data 2–

T.M.D.S data 2+

T.M.D.S data 2 shield

Not connected

DDC clock

DDC data

Not connected

T.M.D.S data 1–

T.M.D.S data 1+

T.M.D.S data 1 shield

Not connected

+5V power

Ground

16.

17.

18.

19.

20.

21.

22.

23.

24.

C1.

C2.

C3.

C4.

C5.

Hot plug detection

T.M.D.S data 0–

T.M.D.S data 0+

T.M.D.S data 0 shield

Not connected

T.M.D.S clock shield

T.M.D.S clock+

T.M.D.S clock–

Not connected

Ground

DVI Analog RGB Input• DVI Analog Component Input•

Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal

10.

11.

12.

13.

14.

15.

Not connected

DDC clock

DDC data

Vertical sync

Not connected

+5V power

Ground

16.

17.

18.

19.

20.

21.

22.

23.

24.

C1.

C2.

C3.

C4.

C5.

Hot plug detection

Not connected

Analog input Red

Analog input Green

(Sync On Green)

Analog input Blue

Horizontal sync

(Composite Sync)

Ground

10.

11.

12.

13.

14.

15.

Not connected

Ground

16.

17.

18.

19.

20.

21.

22.

23.

24.

C1.

C2.

C3.

C4.

C5.

Not connected

Analog input Pr/Cr

Analog input Y

Analog input Pb/Cb

Not connected

Ground

1724

1823

2 1

916

8 7

1724

1823

2 1

916

8 7

-3

RS-232C Terminal: mini DIN 9 pin female connector

Pin No. Signal Name I/O Reference

Receive Data

Send Data

Signal Ground

Request to Send

Clear to Send

Input

Output

Not connected

Connected to internal circuit

Not connected

Connected to internal circuit

Not connected

Connected to CS in internal circuit

Connected to RS in internal circuit

Not connected

RS-232C Terminal: D-sub 9 pin male connector of the DIN-D-sub RS-232C adaptor

Pin No. Signal Name I/O Reference

Receive Data

Send Data

Signal Ground

Request to Send

Clear to Send

Input

Output

Not connected

Connected to internal circuit

Not connected

Connected to internal circuit

Not connected

Connected to CS in internal circuit

Connected to RS in internal circuit

Not connected

RS-232C Cable recommended connection: D-sub 9 pin female connector

Pin No. Signal Pin No. Signal

Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the

controlling device (e.g. computer).

•

Note

Projector

Pin No.

Computer

Pin No.

USB Terminal: Type B USB connector LAN Terminal: LAN (RJ-45)

Pin No. Signal Name Pin No. Signal Pin No. Signal

VCC

USB–

USB+

USB power

USB data–

USB data+

Signal Ground

TX+

TX–

RX+

RX–

2 1

1 5

6 9

1 5

6 9

5 1

9 6

5 1

9 6

4 3

1 2

4 3

1 2

8... 18 ... 1

Connecting Pin Assignments

Produktspezifikationen

Marke:	Sharp
Kategorie:	Videostrahl
Modell:	PGF-267X
Marktpositionierung:	Short throw
Gewicht:	3400 g
Produkttyp:	Short-Throw-Projektor
Akku-/Batterietyp:	AA
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	50 - 35 °C
Fernbedienung enthalten:	Ja
Eingebauter Ethernet-Anschluss:	Ja
Stromverbrauch (Standardbetrieb):	326 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Anzahl HDMI-Anschlüsse:	1
Stromverbrauch (Standby):	11 W
Geräuschpegel:	37 dB
Energiebedarf:	240 V
RS-232 port:	1
DVI Anschluss:	Ja
Schnittstelle:	USB
Abmessungen (BxTxH):	270 x 124 x 313 mm
Projektorhelligkeit:	2500 ANSI Lumen
native Auflösung des Projektors:	XGA (1024x768)
Projektionsflächenkapazität:	- Zoll
Projektionsabstand:	- m
Fokus:	Manuell
Anzahl VGA (D-Sub) Anschlüsse:	1
Serielle Schnittstelle:	RS-232
Lebensdauer der Lichtquelle:	4000 h
Lampenleistung:	250 W
Typ der Lichtquelle:	Lampe
Brennweitenbereich:	- mm
Anzahl S-Video-Eingänge:	1
Vertikaler Scanbereich:	45 - 85 Hz
Horizontaler Scanbereich:	15 - 110 kHz