Sharp PGD50X3D Bedienungsanleitung

Sharp Beamers PGD50X3D

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharp PGD50X3D (69 Seiten) in der Kategorie Beamers. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/69
GEBRUIKSAANWIJZING
Inleiding Snelstartgids Installatie Aansluitingen
Basisbediening
Handige
voorzieningen
Aanhangsel
DATA-PROJECTOR
MODEL
PG-D50X3D
PG-D45X3D
ii
BELANGRIJK
Vul het model- en serienummer in, dat
staat aangegeven op het achterpaneel
van de projector. Deze informatie heeft u
nodig in geval van verlies of diefstal.
C o n t ro l e e r o f a l l e m e e g e l e v e r d e
accessoires, zoals beschreven onder
“Bijgeleverde accessoires” op blz. 11 van
deze gebruiksaanwijzing, inderdaad in de
doos aanwezig zijn voor u de verpakking
recyclet.
Modelnummer:
Serienummer:
iii
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating
a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse
marked or and of the same rating as above, which is also indicated on the pin face
of the plug, must be used.
Always refi t the fuse cover after replacing the fuse. Never use the plug without the fuse
cover fi tted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied, cut off the mains plug and fi t an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi-
ately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket
outlet, as a serious electric shock may occur.
To fi t an appropriate plug to the mains lead, follow the instructions below:
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may not correspond with
the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the
plug which is marked by the letter E or by the safety earth symbol or coloured green
or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked
with the letter L or coloured red.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
Geautoriseerde vertegenwoordiger in de Europese Unie
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
ALLEEN E.U.-LANDEN

Produktspezifikationen

Marke: Sharp
Kategorie: Beamers
Modell: PGD50X3D

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sharp PGD50X3D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten