Sharp AL-2051 Bedienungsanleitung

Sharp Drucker AL-2051

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharp AL-2051 (44 Seiten) in der Kategorie Drucker. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/44

MODEL : AL-2051

DIGITAL MULTIFUNCTIONAL SYSTEM

START GUIDE

DIGITALES MULTIFUNKTIONSGERÄT

STARTANLEITUNG

SYSTEME MULTIFONCTIONS NUMERIQUE

GUIDE DE DEMARRAGE

DIGITAAL MULTIFUNCTIONEEL SYSTEEM

STARTERSGIDS

COPIADORA LÁSER DIGITAL

GUÍA DE INICIO

SISTEMA MULTIFUNZIONALE DIGITALE

GUIDA DI BASE

DIGITALT SYSTEM MED FLERE FUNKTIONER

STARTVEJLEDNING

DIGITAALINEN MONITOIMIJÄRJESTELMÄ

ALOITUSOPAS

DIGITALT MULTIFUNKSJONSSYSTEM

STARTVEILEDNING

DIGITALT MULTIFUNKTIONSSYSTEM

STARTMANUAL

Required in IEC-950 (EN 60 950) - Europe

• The equipment should be installed near an accessible socket outlet for easy disconnection.

Required in Appendix ZB of BS 7002 (En 60 950) — United Kingdom

MAINS PLUG WIRING INSTRUCTIONS

The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable

(moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse

to BS1362 marked or and of the same rating as the one removed from the plug must

be used.

Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without

the fuse cover fitted.

In the unlikely event of the socket outlet in your home not being compatible with the plug supplied

either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable

plug is fitted and fit an appropriate type observing the wiring code below.

DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately

and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted

elsewhere into a 13A socket outlet as a serious electric shock may occur.

To fit an appropriate plug to the mains lead, follow the instructions below:

IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW: Earth

BLUE: Neutral

BROWN: Live

As the colours of the wires in this mains lead may not correspond with coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug

which is marked with the letter E, or by the safety earth symbol Å@, or coloured green or green-

and-yellow.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter

N or coloured black.

The wire which is coloured BROWN must be connected to the terminal which is marked with the

letter L or coloured red.

If you have any doubt, consult a qualified electrician.

WARNING: THIS APPARATUS MUST BE EARTHED.









DIGITAL MULTIFUNCTIONAL SYSTEM

START GUIDE

MODEL: AL-2051

This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to ensure

that you install the machine correctly. The Operation Guide for the machine is on the accompanying CD-ROM. The procedure for viewing the guide is

explained in "6. HOW TO USE THE OPERATION GUIDE". After installation, read the Operation Guide to make full use of all the machine has to offer.

1. CHECKING PACKED COMPONENTS AND

ACCESSORIES

Open the carton and check if the following components and accessories

are included.

If anything is missing or damaged, contact your authorized service

representative.

PREPARING THE MACHINE FOR

INSTALLATION

3. INSTALLING THE TD (TONER DEVELOPER) CARTRIDGE

If the machine does not function properly during setup or use,

or if a function cannot be used, see "TROUBLESHOOTING

AND MAINTENANCE" (p.137).

CD-ROM

Drum cartridge

(installed in unit)

TD cartridge

Power cord

START GUIDE

1Be sure to hold the handles on both

sides of the machine to unpack the

machine and carry it to the installation

location.

2Remove all pieces of tape shown in the illustration below and then open

the RSPF and remove the protective materials. Take out the bag

containing the TD cartridge.

1Open the bypass tray, and

then open the side cover. 2Press gently on both

sides of the front cover to

open the cover.

3Remove the TD cartridge from the bag. Hold the

cartridge on both sides and shake it horizontally

four or five times. Hold the tab of the protective

cover and pull the tab to your side to remove the

cover.

While pushing the lock

release button, gently

insert the TD cartridge

until it locks into place.

5Close the front cover and then the side cover by pressing the

round projections near the side cover open button. 6Ensure that the power switch of the

unit is in the OFF position. Insert the

attached power cord into the power

cord socket at the rear of the unit.

Plug the other end of the power cord

into the nearest outlet.

Only insert the power cord

into a properly grounded wall

socket.

Do not use extension cords or

power strips.

When closing the covers, be sure to close the front cover

securely and then close the side cover. If the covers are

closed in the wrong order, the covers may be damaged.

4 or 5 times

Lock release button

Produktspezifikationen

Marke:	Sharp
Kategorie:	Drucker
Modell:	AL-2051
Marktpositionierung:	Business
USB Anschluss:	Ja
WLAN:	Nein
Gewicht:	18500 g
Eingebautes Display:	Ja
Anzahl USB 2.0 Anschlüsse:	1
Display:	LCD
Energiebedarf:	220-240V, 50/60Hz
Netzteiltyp:	AC
Kompatible Betriebssysteme:	Windows 2000/XP, Windows Server 2003/\n2008, Windows Vista, Windows 7
Abmessungen (BxTxH):	518 x 460 x 376 mm
Speicherkapazität:	64 MB
Integrierter Kartenleser:	Nein
RAM-Speicher maximal:	128 MB
Maximale Auflösung:	600 x 600 DPI
Treiber enthalten:	Ja
Textzeilen:	2 Zeilen
Nachhaltigkeitszertifikate:	ENERGY STAR
Graustufen:	256
Standard-Schnittstellen:	USB 2.0
Druckgeschwindigkeit (Schwarz, normale Qualität, A4/US Letter):	20 Seiten pro Minute
Drucken:	Monodruck
Doppelseitiger Druck:	Nein
Verkleinerung/Vergrößerung:	25 - 400 %
Kopieren:	Monokopie
Gesamte Ausgabekapazität:	- Blätter
Gesamte Papierkapazität:	300 Blätter
Medientypen für das Papierfach:	Normales Papier
ISO-A-Formate (A0...A9):	A4, A5, A6
Maximale Papiergröße der ISO A-Serie:	A4
All-in-one-Funktionen:	Copy, Print, Scan
Farbe-Funktionen all-in-one:	Nein
Stromverbrauch (durchschnittlicher Betrieb):	1000 W
Scannen:	Mono-Scannen
Faxen:	Nein
Digitaler Sender:	Nein
Maximale Druckgröße:	210 x 297 mm
Maximale monatliche Auslastung:	- Seiten pro Monat
Maximale Papierkapazität:	300 Blätter
Emulation:	PLC
Unterstützte(s) Mediengewicht(e):	56 - 128 g/m²
Optische Scan-Auflösung:	600 x 600 DPI
Duplex-Scan:	Nein
Max. Auflösung:	600 x 600 DPI
Duplex-Kopie:	Nein
Dauer bis erste Kopie (schwarz,normal):	8 s
Duplex-Faxmodus:	Nein
A6-Karte:	Ja
Mehrfach-Kopie (max.):	99 Kopien
Ethernet/LAN:	Ja