Severin AS 3948 Bedienungsanleitung

Severin Schneidemaschine AS 3948

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Severin AS 3948 (4 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Dear Customer,

Before using the appliance, the user should

read the following instructions carefully.

Familiarisation

1. Rating label (on underside of the unit)

2. Push switch

3. Release button

4. Slide lock for base plate

5. Power cord

6. Stainless steel blade

7. Blade mounting

8. Base plate

9. End-piece holder with finger guard

10. Sliding tray (foldable)

11. Stop plate

12. Thickness selection knob

13. Collection tray

Connection to the mains supply

Make sure that the supply voltage

corresponds with the voltage marked on the

rating label. This product complies with all

binding CE labelling directives.

Important safety instructions

●Before the appliance is used, the main

body as well as any attachment fitted

should be checked thoroughly for any

defects. Should the appliance, for

instance, have been dropped onto a hard

surface, it must not be used any longer:

even invisible damage may have adverse

effects on the operational safety of the

appliance.

●This appliance is not intended for use by

any person (including children) with

reduced physical, sensory or mental

capabilities, or lacking experience and

knowledge, unless they have been given

supervision or instruction concerning the

use of the appliance by a person

responsible for their safety.

●Children should be supervised to ensure

that they do not play with the appliance.

●Do not allow the slicer to come into

contact with open flames or any hot

surface such as hotplates.

●Do not operate the slicer if

- the unit or its power cord show any

signs of damage,

- the appliance has been dropped on to a

hard surface, perhaps causing internal

damage,

- the sliding tray, stop plate or base plate

have not been correctly fitted.

●For safety reasons, always bring the stop

plate back to its rest (zero) position after

use, so that it is flush with the blade.

●We strongly recommend that the

appliance is only used with the sliding

tray and end-piece holder properly

installed and in position. Exceptions may

be made only if required by the size or

shape of the food to be sliced.

●Always remove the plug from the wall

socket

-after use,

-in case of any malfunction,

-during cleaning of the appliance.

●Do not allow the power cord to come

into contact with the blade. When

removing the plug from the wall socket,

never pull on the power cord.

●This appliance is intended for domestic

use only and not for commercial

applications.

●No responsibility is accepted if damage

results from improper use, or if these

instructions are not complied with.

●In order to comply with safety

regulations and to avoid hazards, repairs

of electrical appliances must be carried

out by qualified personnel, including the

replacement of the power cord. If repairs

are needed, please send the appliance to

one of our customer service departments.

The address can be found in the

appendix to this manual.

Multi-use slicer



Operation

Applications

The slicer is designed for use with bread,

cold cuts, ham, cheese, cold roasts and other

foodstuffs suitable for slicing.

Short-term operation

The appliance has been designed for short-

term operation only, i.e. the slicer should not

be operated continuously for more than 10

minutes. Switch it off afterwards and allow

the motor to cool down before switching on

again.

Positioning the slicer

The slicer must be positioned on a flat, solid

surface.

Locking the base plate

Fold the base plate into its horizontal

operating position, and then lock it by

pushing the slide lock as far as possible in the

direction of the hinge.

To unlock, slide the lock away from the

hinge.

Fitting the sliding tray

Hold the sliding tray vertically next to the

base plate in such a way that the guide rail

on the tray is located underneath the base

plate. Pull the tray sideways and upwards so

that the rail slips into the guide track

underneath the base plate, and then fold the

tray 90° upwards to lock it into the track.

The tray will now be securely fitted in the

base plate track.

Setting thickness

The thickness of the slices is infinitely

adjustable by means of the selection knob.

Always bring the stop plate back to its rest

(zero) position after use.

Safety switch

To activate the motor, first press the release

button, then the push switch, which will lock

in the operating position. As soon as the

switch is pressed again, the motor will

automatically stop.

Slicing

Following the above safety instructions, the

slicer can now be operated.

Adjust the desired thickness of the slices.

Position the collection tray underneath

the unit.

Use the right hand to place the food to

be sliced on to the sliding tray and to

press it against the stop plate.

Fit the end piece holder, with the studded

side facing the blade, on to the tray.

Use the left hand to press the release

button and, almost simultaneously, the

push switch, and then move the sliding

tray against the rotating blade. At the

same time, press the end piece holder

containing the food lightly against the

blade.

The end piece holder ensures the food

will be held safely while slicing takes

place.

The cut slices are collected in the tray

underneath the unit.

●For safety reasons, always bring the stop

plate back to its rest (zero) position after

use so that it is flush with the blade.

Practical hints

When cutting a loaf of bread where the

crust is thicker or harder on the top, it

should be placed against the blade in

such a way that the firm part of the crust

faces the cutting edge.

When cutting cheese, or when cutting

very thin slices of other foods, use a

slightly moist cloth to wipe the blade first.

This will make the slicing process easier.

When cutting ham, ensure that the fatty

side is facing upwards.

General cleaning and care

General

●Always remove the plug from the wall

socket before detaching any accessories,

Produktspezifikationen

Marke:	Severin
Kategorie:	Schneidemaschine
Modell:	AS 3948
Leistung:	150 W
Gehäusematerial:	Kunststoff
Abmessungen (BxTxH):	343 x 260 x 204 mm
Edelstahl-Klingen:	Ja
Typ des Schneiders:	Elektro
Scheibendicke (max):	20 mm