SereneLife SLSBXN850GY Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr SereneLife SLSBXN850GY (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
www.SereneLifeHome.com
ASSEMBLY INSTRUCTIONS & LAYOUT
Please Note:
• Be sure to check the letters marked on the sides of the bin and align as shown in the images for proper orientation.
• Reference the images on the corresponding page.
1. Lay the rear panel down and start by adding in the side plates.
• First insert the left panel (B) into the rear panel (F), press the rear panel (F) down to secure the left panel (B)
• Then insert the right panel (C) into the rear panel (F), press the rear panel (F) down to secure the right panel (C)
2. Now add the base plate (D)
• First place the base plate (D) on the cushion to avoid scratches, then insert the 4 base pads (L) into the base plate (D).
• Then insert the assembled cabinet down into the slot corresponding to the base panel (D).
3. Finally we add the screws (H)
• First add screws to secure the side panel (B, C, E, F) to the base plate (D), then add screws in the corners to secure the
side panels (B, C, E, F).
• Then align the hinge of the lid and attach with 2 screws on each side.
Box lid
Rear panel
Left panel
Right panel
Front panel
Base plate
12
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.SereneLifeHome.com
HOW TO SET A CUSTOM PASS CODE:
1. Adjust the pin to your current pass code (By default, the lock pin is set to “0000”).
2. Completely remove the top drawer from the cabinet and on the inside of the cabinet switch the lever located on the lock
from the B to A position.
3. While lever is in A position - set the desired new code. Make sure the 4 dials you set are exactly parallel and lined up -
you don’t want to set to the wrong number by mistake. (Sample below).
4. Once your new pass code is entered, change the lever back from A to the B position.
5. Make sure to write down & remember your code.
There is no way to recover it once it is set.
3 4
0 0 0
A
B
A
B
A
B
A
B
1 2 3
3
1
2


Produktspezifikationen

Marke: SereneLife
Kategorie: Nicht kategorisiert
Modell: SLSBXN850GY

Brauchst du Hilfe?

Wenn Sie Hilfe mit SereneLife SLSBXN850GY benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert SereneLife

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-