SentrySafe S3871 Bedienungsanleitung
SentrySafe
Gewölbe
S3871
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SentrySafe S3871 (13 Seiten) in der Kategorie Gewölbe. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/13
Model No.
Modèle Nº
Modelo No.
Serial No.
Nº de série
No. de serie
Dial Combination (Not All Models)
Combinaison du cadran (pas tous
les modèles)
Combinación del disco (No todos
los modelos)
Key No. (Not All Models)
Clé Nº (pas tous les modèles)
Llave No. (No todos los modelos)
Factory Code (Not All Models)
Code d’usine (pas tous les modèles)
Código de fábrica (No todos los
modelos)
If you experience
any
problems
or challenges with your safe, please
contact us. Many issues can be
resolved quickly
without
the
product being returned.
Si vous rencontrez
des
problèmes
ou des diffi cultés avec votre coffre-fort,
veuillez nous contacter. De nombreux
problèmes peuvent être résolus
rapidement
sans
avoir à retourner
le produit.
Si llega a tener
algún
problema
o difi cultad con su caja fuerte, favor
de contactarnos. Muchos asuntos
se pueden resolver rápidamente
sin
tener que hacer una devolución
del producto.
OWNERS MANUAL
Fire-Safe
®
Safes
TABLE OF CONTENTS
Combination lock ................................................................. 1
Electronic lock ...................................................................... 1
First class customer care ....................................................... 2
Testing ................................................................................. 2
MANUEL DU PROPRIÉTAIRE
Coffres-forts Fire-Safe
®
TABLE DES MATIÈRES
Verrou à combinaison .......................................................3
Verrou électronique............................................................. 3
Service clientèle de toute première classe ............................ 4
Essais ...............................................................................4
MANUAL DEL USUARIO
Cajas fuertes Fire-Safe
®
ÍNDICE
Cerradura de combinación .................................................... 5
Cerradura electrónica ........................................................... 5
Servicio a Clientes de Primera Clase ..................................... 6
Pruebas............................................................................6
513023
www.sentrysafe.com
©2008
•••IMPORTANT•••
DO NOT RETURN SAFE TO THE STORE!
•••IMPORTANT•••
NE RETOURNEZ PAS LE COFFRE FORT
Á LA MAGASIN!
•••IMPORTANTE•••
NO VUELVA LA CAJA FUERTE
A LA TIENDA.
1
Gain entry with the combination lock
Opening your safe for the fi rst time (keep door open during setup):
The handle should be all of the way UP, in the horizontal position before attempting to dial out safe.
Testing your combination: Your safe’s combina tion is printed on the front of this owner’s manual. You will have
a 3-number or 4-number combination depending upon the model purchased.
1
3-NUMBER COMBINATION (Cannot be changed)
1. To unlock and open
Before dialing your combination, simply insert the key
(if equipped) in the lock and turn until the plunger
pops out. Remove key.
NOTE: The safe will lock if key lock cylinder is pressed
in with or without key.
A. Start the dial at zero.
B. Turn the dial to the left. Make sure ZERO
passes the pointer at least THREE times. Then stop
at the first number of your combination.
C. Turn the dial to the right. Stop the SECOND
time you reach the second number of your
combination.
D. Turn the dial to the left. Stop the FIRST
time the pointer reaches the third number of your
combination.
2. To close and lock
You can relock the safe in two ways. With the door
closed, depress the key lock (if equipped) with your
finger, or spin the combination dial one full turn.
For greatest security, do both. (Make sure the door
handle is in the horizontal position.)
4-NUMBER COMBINATION
1. To unlock and open
Before dialing your combination, simply insert the key
(if equipped) in the lock and turn until the plunger pops
out. Remove key.
NOTE: The safe will lock if key lock cylinder is pressed
in with or without key.
A. Start the dial at zero.
B. Turn the dial to the left. Make sure ZERO
passes the pointer at least FOUR times. Then stop
at the first number of your combination.
C. Turn the dial to the right. Stop the THIRD time
you reach the second number of your combination.
D. Turn the dial to the left. Stop the SECOND time
you reach the combination’s third number.
E. Turn the dial to the right. Stop the FIRST time
you reach the last number of your combination.
2. To close and lock
You can relock the safe in two ways. With the door
closed, depress the key lock (if equipped) with your
finger, or spin the combination dial one full turn.
For greatest security, do both. (Make sure the door
handle is in the horizontal position.)
Note: Changing the combination voids your warranty.
To reinstate your Limited 1-Year Warranty, (valid purchase
dated receipt required) you must contact Sentry Customer
Service to document your new combination. If Sentry is not
notified of the combination change during the Warranty
period, locksmith service fees will NOT be covered.
Congratulations on your purchase of a Sentry®Safe product. SentrySafe is the world’s leader in fi re/water-resistant and security storage. This guide describes how to easily set up your safe.
Getting started
3-NUMBER COMBINATION (Cannot be changed)
1. To unlock and open
Before dialing your combination, simply insert the key
(if equipped) in the lock and turn until the plunger
pops out. Remove key.
NOTE: The safe will lock if key lock cylinder is pressed
in with or without key.
A. Start the dial at zero.
B. Turn the dial to the right. Make sure ZERO
passes the pointer at least THREE times. Then stop
at the first number of your combination.
C. Turn the dial to the left. Stop the SECOND
time you reach the second number of your
combination.
D. Turn the dial to the right. Stop the FIRST
time the pointer reaches the third number of your
combination.
2. To close and lock
You can relock the safe in two ways. With the door
closed, depress the key lock (if equipped) with your
finger, or spin the combination dial one full turn.
For greatest security, do both. (Make sure the door
handle is in the horizontal position.)
4-NUMBER COMBINATION
1. To unlock and open Before dialing your combination, simply insert the key
(if equipped) in the lock and turn until the plunger pops
out. Remove key.
NOTE: The safe will lock if key lock cylinder is pressed
in with or without key.
A. Start the dial at zero.
B. Turn the dial to the left. Make sure ZERO
passes the pointer at least FOUR times. Then stop
at the first number of your combination.
C. Turn the dial to the right. Stop the THIRD time
you reach the second number of your combination.
D. Turn the dial to the left. Stop the SECOND time
you reach the combination’s third number.
E. Turn the dial to the right. Stop the FIRST time
you reach the last number of your combination.
2. To close and lock
You can relock the safe in two ways. With the door
closed, depress the key lock (if equipped) with your
finger, or spin the combination dial one full turn.
For greatest security, do both. (Make sure the door
handle is in the horizontal position.)
Note: Changing the combination voids your warranty.
To reinstate your Limited 1-Year Warranty, (valid purchase
dated receipt required) you must contact Sentry Customer
Service to document your new combination. If Sentry is not
notified of the combination change during the Warranty
period, locksmith service fees will NOT be covered.
(For Dial safe models manufactured after 2011, use the following instructions to open your safe)
2
2Gain entry with the basic electronic lock
The handle should be all of the way UP, in the
horizontal position before attempting to open safe.
Opening your safe for the first time (keep door
open during setup):
1. Insert a paper clip or pen point into
the small hole of the battery cover located
directly below the keypad. Push in while
sliding cover to the right (Fig. B).
2. Disconnect and remove battery holder.
• Insert 4 new AA batteries (not included)
to power this lock.
• Reconnect the battery holder and put back into proper
position. Slide battery cover back in place.
NOTE: The yellow LED will light when the batteries need
to be replaced.
3.
Simply insert the key (if equipped) in the lock and
turn until the plunger pops out. Remove key.
4. Enter the factory code (printed on the first page of this
guide). When the green light appears, you have four
seconds to turn the handle down to open. Try this several
times before proceeding to the next step.
To unlock safe:
Enter the 5-digit factory code, a pre-programmed user code,
or a pre-programmed user pin (programming instructions
to follow). When the green LED lights you have 4 seconds
to turn the handle and open the safe.
To lock safe:
Close the door and return the handle to the horizontal
position. For greatest security, depress the key lock
(if equipped) with your finger.
NOTE: If your unit is equipped with a water-resistant
gasket additional pressure to the left corner of the door
may be required before the handle can be returned to the
horizontal position.
Access codes
There are 3 possible ways to unlock and access the safe:
1. Factory code
(Found on the front cover of this guide.) You can always
open the safe by entering the pre-set 5-digit factory code.
This code cannot be deleted.
2. User code
If you prefer to employ your own code, you can program
the safe to open using a 5-digit user code of your choice.
3. User pin
If you wish to give someone else temporary access to the
safe, you can program a 5-digit user pin that can later
be erased.
Programming the user code
NOTE: One (1) user code is allowed.
To add:
1. Press the Prog key , then enter the 5-digit factory code.
2. Enter the 5-digit user code of your choice.
To delete:
1. Press the Prog key.
2. Enter the 5-digit factory code twice.
Programming user pin
NOTE: One (1) user pin is allowed.
To add:
1. Press the Prog key 2 times.
2. Enter your 5-digit user code.
3. Enter the 5-digit user pin of your choice.
To delete:
1. Press the Prog key 2 times.
2. Enter your 5-digit user code.
3. Enter 0, 0, 0, 0, 0.
NOTE: If your safe does not appear to be working, please
check batteries before calling Sentry Customer Care.
Signals
Your electronic-lock safe communicates by means of several
audio/visual signals.
Red (Error) LED + three beeps indicates one
of the following:
1. You have pressed Program key out of sequence.
2. You have entered an invalid code or user pin.
3. You have let 5 seconds or more elapse between
key presses.
4. Lights after three consecutive invalid codes are input
(2-minute delay mode).
Green LED only:
1. Comes ON after you enter a valid code and remains
lit during the 4-second period in which the safe can be
opened.
2. Comes ON in the Programming mode and remains
lit until you have finished entering a 5-digit code.
Yellow LED only:
1. Comes ON when the batteries need to be replaced.
1 2 3
4 5 6
7 8 9
0
1 2 3
4 5 6
7 8 9
0
B
Produktspezifikationen
| Marke: | SentrySafe |
| Kategorie: | Gewölbe |
| Modell: | S3871 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit SentrySafe S3871 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gewölbe SentrySafe
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
Bedienungsanleitung Gewölbe
- Gewölbe Hama
- Gewölbe Philips
- Gewölbe Guzzanti
- Gewölbe Thule
- Gewölbe Conrad
- Gewölbe FERM
- Gewölbe Topcraft
- Gewölbe Dometic
- Gewölbe Abus
- Gewölbe Olympia
- Gewölbe Yale
- Gewölbe Perel
- Gewölbe Workzone
- Gewölbe Westfalia
- Gewölbe Burg Wächter
- Gewölbe Honeywell
- Gewölbe Filex
- Gewölbe First Alert
- Gewölbe Master Lock
- Gewölbe Phoenix
- Gewölbe Rottner
- Gewölbe Salvus
- Gewölbe Juwel
- Gewölbe Toolland
- Gewölbe Kidde
- Gewölbe Royal Sovereign
- Gewölbe SereneLife
- Gewölbe Sygonix
- Gewölbe Fluke
- Gewölbe VARO
- Gewölbe Duralock
- Gewölbe EasySafe
- Gewölbe Fichero
- Gewölbe FireKing
- Gewölbe Jewel
- Gewölbe Kreator-Varo
- Gewölbe M-Locks
- Gewölbe Nauta
- Gewölbe Oxloc
- Gewölbe Protector
- Gewölbe ROMA
- Gewölbe Sentry
- Gewölbe Sistec
- Gewölbe SMC
- Gewölbe Steren
- Gewölbe Technomax
- Gewölbe Avanti
- Gewölbe Olymp
- Gewölbe Challenge
- Gewölbe Suncast
- Gewölbe Kreator
- Gewölbe Barska
- Gewölbe NOFIRE
- Gewölbe Homak Security
- Gewölbe CAWI
- Gewölbe Rottner Tresor
- Gewölbe Winholt
- Gewölbe Stamony
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
5 Oktober 2024
5 Oktober 2024
30 September 2024
29 September 2024
27 September 2024
23 September 2024