Sentry DH-134E - Depository Safe Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sentry DH-134E - Depository Safe (9 Seiten) in der Kategorie Kluis. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/9
Serial No.
Nº de série
No. de serie
Master Code
Code de principal
Código maestro
Manager Code
Code de responcable
Código de administrador
➧
➧
➧
OWNERS MANUAL
Depository Safes
TABLE OF CONTENTS
Battery installation ......................................................................1
Programming the lock codes .......................................................1
Dual user mode ..........................................................................2
Time delay mode .........................................................................2
Floor mount ................................................................................2
Customer care.............................................................................3
MANUEL DU PROPRIÉTAIRE
Coffres-forts de Dépôt
TABLE DES MATIÈRES
Installation des piles ................................................................... 3
Programmation des codes de verrouillage .................................. 3
Mode à double utilisateur .......................................................... 4
Mode temporisé ......................................................................... 4
Installation au sol ......................................................................5
Service clientèle ......................................................................... 5
MANUAL DEL USUARIO
Cajas Fuertes de Depósito
ÍNDICE
Instalación de las pilas ................................................................6
Programación de los códigos de cierre ........................................6
Modo de usuario doble ...............................................................7
Modo de retardo .........................................................................7
Montaje en el piso ......................................................................7
Servicio a clientes.............................................................8
401587
©2012
777777
0000
If you experience
any
problems
or challenges with your safe, please
contact us. Many issues can be
resolved quickly
without
the
product being returned.
Si vous rencontrez
des
problèmes
ou des difficultés avec votre coffre-fort,
veuillez nous contacter. De nombreux
problèmes peuvent être résolus
rapidement
sans
avoir à retourner
le produit.
Si llega a tener
algún
problema
o dificultad con su caja fuerte, favor
de contactarnos. Muchos asuntos
se pueden resolver rápidamente
sin
tener que hacer una devolución
del producto.
www.sentrysafe.com
900 Linden Avenue / Rochester, New York / 14625-2784 USA
Customer Service: 1-800-828-1438
Fax: 585-381-2940
El Departmento de Servicio al Cliente:
Debe marcarse un código de acceso antes de marcar el
número 800. Es un proceso de 2 pasos.
Paso 1: marque 01 800 112 2020 ó 001 800 658 5454
Paso 2: a la indicación marque 1-800-451-0821
•••IMPORTANT•••
DO NOT RETURN SAFE TO THE STORE!
•••IMPORTANT•••
NE RETOURNEZ PAS LE COFFRE FORT
Á LA MAGASIN!
•••IMPORTANTE•••
NO REVUELVA LA CAJA FUERTE
A LA TIENDA.
1
Getting started
1
Installation of the batteries
(keep door open during setup):
1. Turn the keypad housing counter clockwise
and carefully pull away from the mounting
plate to expose battery compartment.
2. Install four new AAA Alkaline batteries
(factory installed batteries may be included
with some models).
Caution: Hold onto the
keypad housing to avoid pulling wires.
Note: Do not use rechargeable batteries or any
other type of non-alkaline battery. Do not mix
old and new batteries. Do not mix alkaline and
standard batteries.
3. Carefully position the keypad into the
inserts on the mounting plate and turn
clockwise. Ensure that there are no wires or
cables trapped between the keypad and the
mounting plate. Pinched cables result in a
short circuit.
4. Enter: * - Master or Manager Code (from
front of booklet) - #
The lock will indicate a valid code entry with
a single signal and the open light will stay
green for five (5) seconds.
5. Turn the handle clockwise before the green
light disappears.
Depository Safe
Thank you for purchasing this security safe from Sentry®Safe. This guide is designed to maximize the user and security features of this product.
The SentrySafe electronic lock is shipped with a
factory set master & manager code (see front of
booklet). You should set the lock to your own
unique master & manager code immediately.
Please keep your codes in a secure location.
You may also register your codes on our
website at www.sentrysafe.com.
A single signal (LED flashes and beeps once)
response from the lock indicates valid entry.
A double signal (LED flashes and beeps
twice) response from the lock indicates an
invalid entry.
• If three incorrect entries are entered in a
row, the keypad will shut down for a period
of five minutes. During this shut down period
you will not get a response from the keypad.
Changing the Master Code
(Code length: 1 to 10 digit code)
Always
perform this operation with the door open.
1. Enter: # - Existing Master Code - #
2. The set light will stay orange for ten (10)
seconds.
3. Enter: 1 - * - New Master Code - # - New
Master Code - #, before the orange light
disappears.
If a mistake is made during the change, wait
thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing
the door: Enter: * - Code - #
• The lock will indicate a valid code change
with a single signal.
• The lock will indicate an invalid code change
with a double signal and the old code is still
valid.
Changing the Manager Code
(Code length: 1 to 10 digit code)
Always
perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10)
seconds.
3. Enter: 2 - * - New Manger Code - # - New
Manager Code - #, before the orange light
disappears.
If a mistake is made during the change, wait
thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing
the door: Enter: * - Code - #
• The lock will indicate a valid code change
with a single signal.
• The lock will indicate an invalid code change
with a double signal and the old code is still
valid.
Activate user codes
(Code length: 1 to 10 digit code)
Always
perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10)
seconds.
3. Enter: User ID Number (3-7) - * - New User
Code - # - New User Code - #, before the
orange light disappears.
If a mistake is made during the activation, wait
thirty (30) seconds and repeat steps 1 thru 3.
• The lock will indicate a valid code entry with
a single signal.
• The lock will indicate an invalid code entry
with a double signal and the old code is still
valid.
Example: # - Master Code or Manger Code - #
- 5 - * - New User Code - # - New User Code -
#. This will activate User Five (5).
Changing the user code
Always perform this operation with the door
open
1. Enter: # - User Code - #
2. The set light will stay orange for ten (10)
seconds.
3. Enter: New User Code - # - New User Code -
#, before the orange light disappears.
If a mistake is made during the change, wait
thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing
the door: Enter: * - Code - #
• The lock will indicate a valid code change
with a single signal.
• The lock will indicate an invalid code change
with a double signal and the old code is still
valid.
The Master and Manager can also change
the user codes by following the “Activate user
codes” section steps 1 thru 3.
Deleting user codes
Always perform this operation with the door
open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: User ID Number (3-7) - * - # - #
Programming your lock codes
2
2
3
Any Code + Any Code to unlock
1. Enter: # - Master Code - # - 1 - # - 1 - #
2. The lock will indicate a valid setting change
with a single signal.
Master or Manager Code + User Code to
unlock
1. Enter: # - Master Code - # - 2 - # - 2 - #
2. The lock will indicate a valid setting change
with a single signal.
Opening your safe in dual user mode
1. Enter: * - 1st Code - # - 2nd Code - #
2. The lock will indicate a valid code entry with
a single signal and the open light will stay
green for five (5) seconds.
3. Turn the handle clockwise before the green
light disappears
Returning to single user mode
(Single code to unlock)
1. Enter: # - Master Code - # - 0 - # - 0 - #
2. The lock will indicate a valid setting change
with a single signal.
Dual user mode
For additional security set your safe to dual user mode. This feature requires one user to enter their code and within sixty (60) seconds, a second user must
enter thier code to unlock the safe.
Always perform this operation with the door open.
4
Activate time delay
1. Enter: # - Master Code - # - (01-99) - # -
(01-99) - #
2. The lock will indicate a valid setting change
with a single signal.
Example: # - Master Code - # - 05 - # - 05 - #,
this will set a five (5) minute time delay.
3. Press * or # to initiate the Time Delay.
When time delay is set
(During the time delay period the keypad will
not respond to any entries)
The lock will flash once every five (5) seconds
during time delay and will flash once every
second during the last ten (10) seconds of the
time delay ending with a double signal.
The lock will flash twice every five (5) seconds
during the open period. The open period length
is two (2) minutes.
During the open period you can unlock or
program your safe.
Deactivate time delay
1. Enter: # - Master Code - # - 00 - # - 00 - #
2. The lock will indicate a valid setting change
with a single signal.
Time delay mode
Always perform this operation with the door open.
This function will delay both the opening and programming of the lock.
5
This kit contains:
• Four (4) Masonry Anchors
Required tools:
• Safety Glasses
• Powered Drill
• Adjustable Wrench
• 1/2 in. (M12) Masonry Drill
Instructions:
1. Unlock safe and open door.
2. Remove safe floor carpet.
3. Look on the bottom of safe for four (4)
holes with cap plugs.
4. Remove the cap plugs.
5. Position the safe in the desired location.
6. From inside the safe mark the location of
the four (4) bolt down holes.
7. Move the safe aside to the clear marked
spots for drilling.
8. Using the ½ in. masonry drill, drill a 4 in.
deep hole in the marked locations.
9. Replace the safe in the desired location
with the holes in the safe aligned with the
drilled holes in the floor.
10. Pass each masonry anchor through the safe
floor into the drilled holes; making contact
with the safe floor.
11. Tighten each masonry anchor with the
adjustable wrench.
12. Replace safe floor carpet.
Floor Mount (optional)
Produktspezifikationen
| Marke: | Sentry |
| Kategorie: | Kluis |
| Modell: | DH-134E - Depository Safe |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sentry DH-134E - Depository Safe benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kluis Sentry
23 August 2024
17 August 2024
17 August 2024
16 August 2024
8 August 2024
6 August 2024
Bedienungsanleitung Kluis
- Kluis Thule
- Kluis Topcraft
- Kluis Dometic
- Kluis Olympia
- Kluis Yale
- Kluis Perel
- Kluis Burg Wächter
- Kluis Honeywell
- Kluis First Alert
- Kluis Master Lock
- Kluis Phoenix
- Kluis Rottner
- Kluis Salvus
- Kluis SentrySafe
- Kluis Juwel
- Kluis Toolland
- Kluis Kidde
- Kluis Royal Sovereign
- Kluis SereneLife
- Kluis Sygonix
- Kluis Fluke
- Kluis VARO
- Kluis Duralock
- Kluis FireKing
- Kluis Jewel
- Kluis Protector
- Kluis Sistec
- Kluis SMC
- Kluis Steren
- Kluis Technomax
- Kluis Avanti
- Kluis Olymp
- Kluis Challenge
- Kluis Suncast
- Kluis Kreator
- Kluis Barska
- Kluis CAWI
- Kluis Rottner Tresor
Neueste Bedienungsanleitung für -Kategorien-
15 September 2024
5 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
2 September 2024
2 September 2024
2 September 2024