Sencor SCS WA1003 Bedienungsanleitung

Sencor Subwoofer SCS WA1003

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Sencor SCS WA1003 (4 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war fĂŒr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
SCS WA1003
ACTIVE SUBWOOFER
AKTIVNÍ SUBWOOFER
AKTÍVNY HLBOKOTÓNOVÝ
REPRODUKTOR
AKTÍV MÉLYSUGÁRZÓ
SUBWOOFER AKTYWNY
USER‘S MANUAL
NÁVOD K OBSLUZE
NÁVOD NA OBSLUHU
FELHASZNÁLÓI KÉZIKÖNYV
INSTRUKCJA OBSƁUGI
EN-1
SPECIFICATIONS
Warning:
Don‘t put the machine in the rain or the
mist in case of lightning and re.
Attention: Don‘t block the hole of ventilati-
on or put objects on the machine.
Attention: Leave some space around
the machine in order to be ventilated.
10“ Subwoofer Box
Max. peak Power: 400 W
Max. RMS Power: 120 W
Frequency range (L.P.F.): 50 Hz ~ 250 Hz
(± 2 dB)
Variable LOW Pass Filter
Input sensitivity: 0,2 V ~ 6 V
Speaker impedance: 4 Ohms
Plastic Grill Cover
Dimensions: 45×30,6×28,8 cm
Fuse 30 A
SYSTEM WIRING DIAGRAM
1. Connection of Power Cord
 Since this unit deals with a high
power, large current will ow and the
wiring of the power cord is high impor-
tance.

Connect the red conductor directly
to the (+) battery terminal using the
cable with the fuse holder.

Connect the black wire tightly to
an appropriate screw on the metal
part of car after removing paint for
proper grounding. Be sure to use the
screw not to bring danger for driving.

Proper connection will provide clear
sound.
2. Connection of Remote ON/OFF Wire

Connect the conductor to the swit-
ching output. After connecting to this
device, you will be able to turn it on
and off together with the car radio.
You will nd the switching power
cable next to the car‘s radio antenna
connection.
Note: It is not possible to turn on the
subwoofer without connecting the
REM terminal!
3. Connection of Aux Input (Low Input)

Connect Aux input wires with RCA
type pin jack as follows:
WHITE to L ch pre-input of the car
stereo
RED to R ch of the car stereo
4. Input sensitivity control
 Adjust the input sensitivity to output
of a car stereo connected.
The original version is in the Czech language.
Address of the manufacturer: FAST ČR, a.s., Černokostelecká 1621, CZ-251 01 Ƙíčany
EN-2
WIRING OPERATION
EN Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that
this product shall not be treated as household waste. Please, dispose of this equi-
pment at your applicable collection point for the recycling of electrical & electronic
equipments waste. In the European Union and Other European countries which there
are separate collection systems for used electrical and electronic product. By ensu-
ring the correct disposal of this product, you will help prevent potentially hazardous to the envi-
ronment and to human health, which could otherwise be caused by unsuitable waste handling
of this product. The recycling of materials will help conserve natural resources. Please do not
therefore dispose of your old electrical and electronic equipment with your household waste.
For more detailed information about recycling of this product, please contact your local city
ofce, your household waste disposal service or the shop where you purchased the product.
EN: Changes in text and technical parameters reserved.


Produktspezifikationen

Marke: Sencor
Kategorie: Subwoofer
Modell: SCS WA1003

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sencor SCS WA1003 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Subwoofer Sencor

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung fĂŒr -Kategorien-