Seiko SLP-430 Bedienungsanleitung
Seiko
Labelprinter
SLP-430
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Seiko SLP-430 (24 Seiten) in der Kategorie Labelprinter. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
User Guide
Models 410, 420, 430, 440, 450
For Windows® 2000, Windows XP and Mac OS® X v10.2 or later.
Smart Label Printers®
Series
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential application. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Seiko Instruments could void the
user’s authority to operate the equipment.
Applicable EC Directives and Standards
Directive Title
89/336/EEC EC Electromagnetic Compatibility Directive
73/28/EEC EC Low Voltage Directive
2002/96/EC ECC Waste of Electronic Equipment (WEEE)
ECC Restricting the use of Certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS)
Standards Title
EMC EN55022(1998) class B
EN55024(1998), EN61000-3-2(1995), EN61000-3-3(1995)
LVD EN60950/1992 +A1/1993, +A2/1993, +A3/1995, +A4/1997,
+A11/1997
Copyright
All rights reserved. No parts of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form, or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission of Seiko
Instruments USA Inc. No patent liability is assumed with respect to the use of information
contained herein. While every precaution has been taken in the preparation of this
publication, Seiko Instruments USA Inc. assumes no responsibility for errors or omissions. Nor
is any liability assumed for damages resulting from the use of information contained herein.
Further, this publication and features described herein are subject to change without
notice. Copyright © 1989-2006 by Seiko Instruments USA Inc. All rights reserved.
Trademark Information
IBM is a registered trademark of International Business Machines Corporation. Microsoft
and Windows are registered trademarks of Microsoft Corporation. SII and the SII logo are
registered trademarks of Seiko Instruments Inc. Smart Label Printer is a registered trademark
and SmartLabels, and Smart Label Icons are trademarks of Seiko Instruments USA Inc.
Other products mentioned in this guide are trademarks or registered trademarks of their
respective companies.
Seiko Instruments USA Inc., 2990 Lomita Blvd., Torrance, California 90505 USA
Important Safety Instructions
The following symbols are used in this User Guide.
WARNING. Warning statements are used to indicate actions
that may result in risk of severe personal injury or loss of life.
CAUTION. Caution statements are used to indicate actions
that may result in damage to the printer or other property, or
may result in risk of minor personal injury.
Warning
1 Use only the AC adapter provided with this printer, or an AC adapter that has been
approved by Seiko Instruments for use with this printer. Use of an incorrect AC adapter
may cause risk of overheating or fire.
2 Do not bend or place a heavy object on the power cord as it could damage the cord
and result in risk of electric shock or fire. Do not use the power cord if damaged or
frayed.
3 The thermal print head may become quite hot after printing. Be careful when changing
labels and cleaning the thermal head.
Caution
1 Never insert objects of any kind into this printer as they may touch dangerous voltage
points or short out parts, and may result in a risk of fire or electric shock. Never spill liquid
of any kind on the printer.
2 This printer contains no user-serviceable parts. Do not attempt to service the printer
yourself as this can expose you to dangerous voltage points or other risks. Repair service
should be performed by a trained technician.
3 Do not use this printer near water or in extreme humidity.
4 Be sure to hold only the connector end of the power cord or interface cable when
disconnecting. Repeated pulling on the cable could damage the cable.
Produktspezifikationen
| Marke: | Seiko |
| Kategorie: | Labelprinter |
| Modell: | SLP-430 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Seiko SLP-430 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Labelprinter Seiko
12 August 2024
10 August 2024
Bedienungsanleitung Labelprinter
- Labelprinter 3M
- Labelprinter Renkforce
- Labelprinter Toshiba
- Labelprinter Casio
- Labelprinter Citizen
- Labelprinter Olivetti
- Labelprinter Epson
- Labelprinter Honeywell
- Labelprinter Brother
- Labelprinter Datamax-O'neil
- Labelprinter Dymo
- Labelprinter Primera
- Labelprinter SATO
- Labelprinter TSC
- Labelprinter Zebra
- Labelprinter Bixolon
- Labelprinter Panduit
- Labelprinter Brady
- Labelprinter Star Micronics
- Labelprinter Metapace
- Labelprinter Godex
- Labelprinter Argox
- Labelprinter EC Line
- Labelprinter POSline
- Labelprinter Kroy
- Labelprinter DULA
- Labelprinter Colop
- Labelprinter Custom
Neueste Bedienungsanleitung für -Kategorien-
6 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
2 September 2024