Scubapro Aladin Square Bedienungsanleitung

Scubapro Tauchcomputer Aladin Square

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Scubapro Aladin Square (52 Seiten) in der Kategorie Tauchcomputer. Dieser Bedienungsanleitung war für 33 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/52

Aladin Square

User manual

2ALADIN SQUARE USER MANUAL

SQUARE DIVING COMPUTER - DESIGNED BY DIVING ENGINEERS

Welcome to SCUBAPRO dive computers and thank you for purchasing Square. You are

now the owner of an extraordinary partner for your dives. This manual provides you easy

access to SCUBAPRO state of the art technology and Square’s key features and functions.

Should you wish to know more about SCUBAPRO diving equipment, please visit our website

www.scubapro.com.

WARNING

• Square has 120m/394ft operation depth.

• If 120m is exceeded, -- will be shown in the depth  eld and decompression algorithm does not

calculate correctly.

• Diving with oxygen partial pressures higher than 1.6 bar (corresponding to a depth of 67m/220ft

when breathing compressed air) is extremely dangerous and could lead to serious injury or death.

Aladin Square dive instrument is a personal protective equipment in compliance with the essential safety requirements

of the European Union directive 89/686/EEC. RINA SpA,Via Corsica 12, I-16128 Genoa, notified body no. 0474, have

certified the conformity with the European Standard EN 13319:2000.

EN13319:2000 Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and

safety requirements, test methods. Any information on decompression obligation displayed by equipment covered by this

standard is explicitly excluded from its scope.

English

ALADIN SQUARE USER MANUAL

TABLE OF CONTENTS

1. Introduction to Square ......................................................................................... 6

1.0.1 Buttons .................................................................................... 6

1.0.2 Display ..................................................................................... 7

1.0.3 Heart Rate Option .................................................................... 7

1.0.4 Battery ..................................................................................... 7

1.0.5 Square operation ..................................................................... 8

1.0.6 Surface display ........................................................................ 8

1.0.7 Surface interval counter ............................................................ 8

1.0.8 Checking the Altitude ............................................................... 9

1.0.9 Planning a dive ......................................................................... 9

1.0.10 Reading the Logbook ............................................................. 10

1.0.11 SCUBA log’s .......................................................................... 11

1.0.12 Apnea log’s ............................................................................ 12

1.0.13 Gauge log’s ............................................................................ 12

1.0.14 Checking the battery status ................................................... 13

1.0.15 Settings ................................................................................. 13

1.0.16 Settings Lock ......................................................................... 14

1.0.17 Time set menu ....................................................................... 15

1.0.18 Setting the alarm clock ........................................................... 15

1.0.19 Setting the UTC .......................................................................16

1.0.20 Setting the time ...................................................................... 16

1.0.21 Set the AM/PM or 24h mode ................................................. 16

1.0.22 Setting the date ..................................................................... 16

1.0.23 Setting the sound mode (silent modes) .................................. 17

1.0.24 Setting the user preferred units .............................................. 17

1.0.25 Setting the Backlight on duration ........................................... 17

1.0.26 Deactivating the water contacts ............................................. 18

1.0.27 Checking the device ID .......................................................... 18

1.1 Settings at the dive mode ...................................................................... 19

1.2 Gas settings .......................................................................................... 19

1.2.1 Set Gas 1 ............................................................................... 20

1.2.2 Set Gas D .............................................................................. 20

1.2.3 Nitrox reset time ..................................................................... 21

1.2.4 Desaturation reset .................................................................. 21

1.3 SCUBA settings .................................................................................... 22

1.3.1 Maximum dive depth alarm .................................................... 22

1.3.2 Maximum dive time alarm ...................................................... 22

1.3.3 Setting the Micro Bubble level ................................................ 22

1.3.4 Setting the Safety stop timer .................................................. 23

1.3.5 Set HR limits (Workload settings) ............................................ 23

1.3.6 Set the PDI Stop .................................................................... 23

1.3.7 Selecting the salt (ocean) or fresh water ................................. 24

1.4 Apnea Settings ...................................................................................... 25

1.4.1 Setting the dual depth alarm .................................................. 25

1.4.2 Setting the depth incremental alarm ....................................... 25

1.4.3 Setting the dive time interval alarm ......................................... 26

1.4.4 Setting the surface interval alarm ............................................ 26

1.4.5 Setting the low Heart Rate limit alarm ..................................... 26

1.4.6 Setting the Ascent speed alarm ............................................. 26

1.4.7 Setting the water density ........................................................ 27

Produktspezifikationen

Marke:	Scubapro
Kategorie:	Tauchcomputer
Modell:	Aladin Square

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scubapro Aladin Square benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Tauchcomputer Scubapro

Scubapro Aladin 2G Bedienungsanleitung

9 Mai 2023

Scubapro AIR 2 Bedienungsanleitung

9 Mai 2023

Scubapro MERIDIAN Bedienungsanleitung

9 Mai 2023

Scubapro Chromis Bedienungsanleitung

9 Mai 2023

Scubapro Aladin Square Bedienungsanleitung

9 Mai 2023

Bedienungsanleitung Tauchcomputer

Neueste Bedienungsanleitung für -Kategorien-

Uwatec Aladin Square Bedienungsanleitung

13 März 2024

Uwatec Aladin Air Z O2 Bedienungsanleitung

20 Februar 2024

Uwatec Smart PRO Bedienungsanleitung

23 Dezember 2023

Uwatec Aladin Pro Ultra Bedienungsanleitung

26 November 2023

Uwatec Galileo Terra Bedienungsanleitung

11 September 2023

Mares Airlab Bedienungsanleitung

12 August 2023

Mares Nemo Bedienungsanleitung

12 August 2023

Sherwood AWAC-1 Bedienungsanleitung

2 Juli 2023

Oceanic Versa Pro Bedienungsanleitung

1 Juli 2023

Uwatec SmartTRAK Bedienungsanleitung

30 Juni 2023