Scott i-CX 2 Bedienungsanleitung

Scott Ladestation/Dockingstation i-CX 2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Scott i-CX 2 (4 Seiten) in der Kategorie Ladestation/Dockingstation. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
i-CX 2
®
ALARM CLOCK RADIO
WITH iPod DOCKING STATION
Instruction Manual
GB-1
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
PLACEMENT
. Do not use the unit in places which are extremely hot, cold, dusty, or humid.
. Place the unit on a flat and even surface.
. Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it with a
cloth, or by placing it on a carpet.
. Do not place naked flame sources, such as lighted candles on the apparatus.
. Use the apparatus only in moderate climates (not in tropical climates).
. Do not expose the apparatus to dripping or splashing.
. Do not place objects filled with liquids, such as vases, on the apparatus.
SAFETY
. When connecting and disconnecting the AC power cord from the AC mains outlet, pull the plug and
not the cord itself. Pulling the cord may damage it and may be dangerous.
. The mains outlet and plug must always remain readily operable.
. When you are not going to use the unit for a long period of time, disconnect the AC power cord from
the AC mains outlet.
AC VOLTAGE
. Before use, check that the rated voltage of your unit matches your local voltage.
CONDENSATION
. When there is condensation inside the unit, it may not function normally.
. Let the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room up and
dry the unit before use.
. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
. Ensure that the ventilation is not impeded by covering the ventilation openings with items such as
newspapers, tablecloths, curtains, etc.
BATTERIES
. Pay attention to the environmental aspects of battery disposal.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an
arrowhead symbol within a
triangle is a warning sign
alerting the user to the
presence of “dangerous
voltage” inside the unit.
ATTENTION: To reduce the risk
of electric shock, do not remove
the cover. There are no user
serviceable parts inside the unit.
Refer all servicing to qualified
personnel.
The exclamation mark
within a triangle is a
warning sign alerting the
user to the presence of
important instructions
accompanying the
product.
. In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting
it from mains supply.
GB-2
1234 561
7
8
9
10
11
12
13
14
15171819
20
21
22
23
24
25
16
TABLE OF CONTENTS
PRECAUTIONS 1
TABLE OF CONTENTS 2
BOX CONTENTS 2
LOCATION OF CONTROLS 2
POWER SUPPLY 3
BASIC OPERATION 3
RADIO OPERATION 4
PLAYING AN iPod AND CHARGING THE INTERNAL iPod BATTERY 5
AUX IN FUNCTION 6
AUX OUT FUNCTION 6
MAINTENANCE 6
TROUBLESHOOTING GUIDE 7
TECHNICAL SPECIFICATIONS 7
BOX CONTENTS
1. Unit
2. Adapters for different iPod models (7x)
3. Instruction manual
LOCATION OF CONTROLS
1. Speakers (2x)
2. AC power cord
3. AUX IN jack
4. AUX OUT jack
5. DIMMER HI-LO switch
6. FM antenna wire
7. iPod docking station and connector
8. AM/FM/iPod/AUX switch
9. ALARM SET/OFF button
10. CLK SET button
11. Tuning scale
12. dial TUNING
13. MIN (Minute set) button
14. SNOOZE button
15. FM STEREO LED indicator
16. ON LED indicator
17. Clock back up battery door
18. Clock display
19. Alarm indicator
20. HR (Hour set) button
21. SLEEP button
22. VOLUME dial
23. / , SKIP/SEARCH, PLAY/PAUSE buttons
24. ON button
25. AUTO OFF/MUSIC/BUZZER switch
GB-3
POWER SUPPLY
AC power supply
Insert the AC power cord into the AC mains outlet with a 230V AC ~ 50Hz power source.
Installing the clock back up battery
If the AC cord is disconnected or there is a power failure, this electronic clock is designed to continue
operating internally (without showing the time on the display) with a 9 volt battery (type 6F22, not
included). To install the battery, open the clock back up battery door on the bottom of the unit.
Connect the battery to the terminals of the battery snap inside the compartment (use of an alkaline
battery is recommended) and close the battery door.
After a power failure, the clock time should continue operating. If a flashing time appears on the
display, it indicates the battery is dead or not connected properly. The 9 volt battery will keep the
clock time accurately for approximately 30 minutes. If the power is restored after 30 minutes, the time
may need to be reset.
Precautions when using batteries
1. Replace only with an identical battery or an equivalent type.
2. An exhausted battery must be removed to prevent any battery leakage.
3. Dispose of the battery properly according to environmental regulations.
BASIC OPERATION
ON/ Standby mode
After connecting the power supply (refer to POWER SUPPLY), the unit goes to standby mode and
the clock time is displayed. Press the ON button to turn on the unit and the ON LED indicator lights
up. Press it again to go to standby mode.
Clock time setting
Set the clock
1. Hold down the CLK SET button and press the HR button to set the hours.
2. Hold down the CLK SET button and press the MIN button to set the minutes.
Set the alarm time
1. Hold down the AL SET/OFF button and press the HR button to set the hours.
2. Hold down the AL SET/OFF button and press the MIN button to set the minutes.
Alarm operation
The unit allows you to wake up to a buzzer or to music (AM/FM/iPod).
1. Press and hold down the AL SET/OFF button to display the alarm time.
2. To adjust the alarm time, follow the steps in “Set the alarm time”.
3. To enable the alarm function, slide the AUTO OFF/MUSIC/BUZZER switch to MUSIC if you want
to wake up to music or BUZZER if you want to wake up to the sound of the buzzer. The ALARM
indicator at bottom left corner of the display lights up.
When you choose to wake up to music, the alarm clock radio will start to play the last track it
played before the unit was switched off. This means you can choose which song you will to wake
up to.
4. If MUSIC mode is selected, slide the AM/FM/iPod/AUX switch to select the desired alarm source.
5. When the preset alarm time is reached, the buzzer or music will start up.
6. To stop the alarm, press the AL SET/OFF button. The alarm will sound again at the same time the
next day.
7. To disable the alarm function, slide the AUTO OFF/MUSIC/BUZZER switch to AUTO OFF.
GB-4
Note:
• While the buzzer alarm volume is fixed and cannot be adjusted, the music alarm volume can be
adjusted to your desired level using the VOLUME dial.
• If iPOD/AUX mode is selected, make sure the iPod is inserted in the docking station and the
volume is set to a suitable level.
Snooze function
When the alarm sounds, press the button to stop the alarm temporarily and it will sound SNOOZE
again after 9 minutes. To cancel the SNOOZE function and repeat the alarm the next day, press the
AL SET/OFF button.
Sleep function
This function allows you to program the radio to switch off after a specific time has passed (up to 1
hour and 59 minutes).
1. In standby mode, press and hold down the SLEEP button, and “0:59” is displayed. The unit turns
on.
2. Hold down the SLEEP button and press the MIN button to select the duration: 59, 58…. each time
you press the button the duration decreases until it reaches 0.
3. To set the duration longer than 59 minutes, hold down the SLEEP button and press the HR button.
The duration will be increased by one hour. Keep holding down the SLEEP button and press the
MIN button to adjust the minutes.
4. When the preset sleep duration elapses, the unit turns off automatically.
5. To cancel the sleep function before the preset sleep duration elapses, press the SNOOZE or ON
button to turn off the unit immediately.
Dimmer control
Slide the DIMMER HI-LO switch to set the clock display brightness.
RADIO OPERATION
Listening to the radio
1. Press the ON button to turn on the unit.
2. Slide the AM/FM/iPod/AUX switch to AM or FM.
3. Turn the TUNING dial to receive a radio station. The tuning scale shows the selected frequency.
If a stereo FM station is received, the FM ST LED indicator will light up.
4. Adjust sound volume level by turning the VOLUME dial.
5. To turn off the unit, press the ON button.
Achieve optimum reception
In FM mode, extend and position the FM antenna to achieve optimum reception.
In AM mode, orientate the unit to achieve optimum reception.
GB-5
PLAYING AN iPod AND CHARGING THE INTERNAL iPod BATTERY
Installing an adapter on the iPod docking station
1. Select the iPod adapter that corresponds to your iPod model from the
table below.
2. Install the adapter with the two tabs facing the front, by pushing it down in
the iPod docking station at the top of the unit.
3. To remove the adapter, press at the back of the adapter and pull it up.
iPod dock
adapter No.
iPod description Capacity
6 iPod (4th generation)
iPod (4th generation) with color display 20GB
20 GB & 30GB
7 iPod (4th generation)
iPod (4th generation) with color display 40GB
40GB & 60GB
8 iPod nano (1st generation)
iPod nano (2nd generation) 1GB, 2GB & 4GB
2GB, 4GB & 8GB
9 iPod (5th generation) with video
iPod classic 30GB
80GB
10 iPod (5th generation) with video
iPod classic 60GB & 80GB
160GB
13 iPod nano (3rd
generation) 4GB & 8GB
14 iPod touch 8GB & 16GB
Note: Ensure that you use the adapter corresponding to your iPod in order to ensure that it is
installed in a stable way and that the electrical contact is good.
Listening to your iPod
1. With the correct iPod adapter installed, gently place the iPod (without the protective cover) in the
docking station.
2. Slide the AM/FM/iPod/AUX switch to iPOD/AUX.
3. Press the ON button. Both units will be turned on and the music in the iPod will play automatically.
4. During playback, press the button to pause playback. Press it again to resume normal playback.
5. Press the / buttons repeatedly to skip to the previous or next track.
6. Press and hold down the / buttons to fast search backwards or forwards.
7. Alternatively, you can use the buttons on your iPod to carry out these operations.
Note:
• The internal iPod battery will charge until it is fully charged. Adjust the volume control on the unit
to the desired volume level.
• To prevent sound distortion during iPod playback on this unit, the EQ function in your iPod must
be set to “Off”.
• The docking station is not designed for playing and charging an iPod Shuffle, but it is possible to
connect the iPod’s line out or headphones jack to the unit’s AUX IN jack.

Produktspezifikationen

Marke: Scott
Kategorie: Ladestation/Dockingstation
Modell: i-CX 2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scott i-CX 2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladestation/Dockingstation Scott

Scott

Scott i-SX 90 Bedienungsanleitung

7 August 2024
Scott

Scott ADX 90 R Bedienungsanleitung

6 August 2024
Scott

Scott LSX 10 Bedienungsanleitung

2 August 2024
Scott

Scott i-PX 12 Helin Bedienungsanleitung

19 Juli 2024
Scott

Scott I-SX 50 BK Bedienungsanleitung

19 Juli 2024
Scott

Scott i-CX 2 Bedienungsanleitung

15 Juli 2024

Bedienungsanleitung Ladestation/Dockingstation

Neueste Bedienungsanleitung für -Kategorien-

Polk

Polk BOOM Bit Bedienungsanleitung

16 Oktober 2024
Vorago

Vorago KSP-600 Bedienungsanleitung

8 Oktober 2024
IDance

IDance Mini Blaster 2L Bedienungsanleitung

7 Oktober 2024
Jam

Jam Splash Bedienungsanleitung

5 Oktober 2024
Jam

Jam Thrill HX-P320 Bedienungsanleitung

4 Oktober 2024
Aukey

Aukey SK-S1 Bedienungsanleitung

3 Oktober 2024
Rapoo

Rapoo A500 Bedienungsanleitung

2 Oktober 2024
Gembird

Gembird DD-U3M2 Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS02UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS01UF Bedienungsanleitung

1 Oktober 2024