Scarlett SC-MG45S41 Bedienungsanleitung
Scarlett
Fleischwolf
SC-MG45S41
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Scarlett SC-MG45S41 (21 Seiten) in der Kategorie Fleischwolf. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/21
INSTRUCTION MANUAL
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ
GB MEAT GRINDER ................................................................................................... 5
RUS МЯСОРУБКА ......................................................................................................... 6
CZ MLÝNEK NA MASO ............................................................................................ 7
BG МЕСОМЕЛАЧКА .................................................................................................. 8
UA М’ЯСОРУБКА ....................................................................................................... 10
SCG МАШИНА ЗА МЛЕВЕЊЕ МЕСА ................................................................. 12
EST HAKKLIHAMASIN ............................................................................................... 13
LV GAĻAS MAŠĪNA ................................................................................................... 14
LT MĖSMALĖ ............................................................................................................... 15
H HÚSDARÁLÓ ......................................................................................................... 17
KZ ЕТ ТАРТҚЫШ ....................................................................................................... 18
SL MlYNCEK NA MASO .......................................................................................... 20
SC-MG45S41
www.scarlett.ru
IM013
www.scarlett.ru SC- MG45S41
2
GB DESCRIPTION RUS УСТРОЙСТВО ИЗДЕЛИЯ
1. On/O /R switch
2. Reverse knob ON/R
3. Head
4. Hopper plate
5. Food pusher
6. Snake
7. Cutting blade
8. Cutting plate (fine holes)
9. Cutting plate (medium holes)
10. Cutting plate (large holes)
11. “KUBBE” attachment
12. Sausage attachment
13. Fixing ring
14. Body
15. Head stopper
1. Выключатель ON/O/R
2. Переключатель ON/R
3. Загрузочная горловина
4. Загрузочный лоток
5. Толкатель
6. Металлический шнек
7. Нож
8. Решетка с мелкими отверстиями
9. Решетка со средними отверстиями
10. Решетка с крупными отверстиями
11. Насадка «КУББЕ»
12. Насадка для приготовления домашней колбасы
13. Кольцевая гайка
14. Корпус электродвигателя
15. Фиксатор съемного блока мясорубки
CZ POPIS
BG ОПИСАНИЕ
1. Vypínač ON/O/R
2. Reverse ON/R
3. Plnicí hrdlo
4. Nakládací nádoba
5. Posouvač
6. Kovový šnek
7. Nůž
8. Děrovaný kotouč jemný
9. Děrovaný kotouč střední
10. Děrovaný kotouč hrubý
11. Nástavec na kebáb
12. Děrovaný kotouč hrubý
13. Kruhová matice
14. Těleso elektrického motoru
15. Zarážka odnímatelného bloku
1. Изключвател ON/O/R
2. Реверс ON/R
3. Отвор за подаване на продуктите
4. Табла за подаване на продукти
5. Блъскач
6. Метален шнек
7. Нож
8. Решетка със ситни отвори
9. Решетка със средни отвори
10. Решетка с едри отвори
11. Приставка «КУББЕ»
12. Приставка за приготвяне на домашни колбаси
13. Кръгла гайка
14. Корпус на двигателя
15. Фиксатор на свалящия се блок на месомелачката
UA ОПИС
SCG ОПИС
1. ON/O/R Вимикач
2. Реверс ON/R
3. Завантажувальна горловина
4. Завантажувальний лоток
5. Штовхальник
6. Металевий шнек
7. Ніж
8. Решітка з маленькими отворами
9. Решітка з середніми отворами
10. Решітка з великими отворами
11. Насадка «КУББЕ»
12. Насадка для готування домашньої ковбаси
13. Кільцева гайка
14. Корпус електродвигуна
15. Фіксатор знімного блоку м'ясорубки
1. Прекидач ON/O/R
2. Реверс ON/R
3. Отвор за попуњавање
4. Ладица за попуњавање
5. Гурач
6. Метални шраф
7. Нож
8. Решетка са малим отворима
9. Решетка са средњим отворима
10. Решетка са великим отворима
11. Наставак «КУББЕ»
12. Наставак за прављење домаће кобасице
13. Кружна навртка
14. Кућиште електромотора
15. Држач за блок на скидање машине за млевење меса
EST KIRJELDUS
LV APRAKSTS
1. Lüliti ON/O/R
2. Revers ON/R
3. Ettesöötmistoru
4. Laadimislett
5. Lükkur
6. Metalltigu
7. Nuga
8. Väikeste aukudega võre
9. Keskmiste aukudega võre
10. Suurte aukudega võre
11. Kubbe – otsik
12. Otsik koduse vorsti valmistamiseks
13. Rõngasmutter
14. Elektrimootori korpus
15. Eemaldatava ploki fiksaator
1. Slēdzis ON/O/R
2. Reverss ON/R
3. Pildīšanas atvērums
4. Iekraušanas paplāte
5. Stampa
6. Metāliskais gliemezis
7. Nazis
8. Režģis ar maziem atvērumiem
9. Režģis ar vidējiem atvērumiem
10. Režģis ar lieliem atvērumiem
11. Uzgalis « » KUBBE
12. Uzgalis mājas desu gatavošanai
13. Gredzena uzgrieznis
14. Elektrodzinēja korpuss
15. Gaļas mašīnas noņemamā bloka fiksators
IM013
www.scarlett.ru SC- MG45S41
3
LT APRAŠYMAS H LEÍRÁS
1. Jungiklis ON/O/R
2. Atbulinė eiga ON/R
3. Įkrovimo anga
4. Įkrovimo lovelis
5. Stūmiklis
6. Metalinis sraigtas
7. Peilis
8. Smulkaus malimo grotelės
9. Vidutinio malimo grotelės
10. Stambaus malimo grotelės
11. Antgalis “КUBBЕ”
12. Antgalis dešrelių gamybai
13. Žiedinė veržlė
14. Elektros variklio korpusas
15. Mėsmalės nuimamojo bloko fiksatorius
1. Főkapcsoló ON/O/R
2. Irányváltómű ON/R
3. Adagolótorok
4. Adagolótartály
5. Tolórúd
6. Fém csigacsavar
7. Kés
8. Kislyukú rács
9. Közepes lyukú rács
10. Nagylyukú rács
11. „KUBBE” tartozék
12. Házikolbász elkészítéséhez használt tartozék
13. Gyűrűs csavaranya
14. Motorház
15. A levehető húsdarálóblokk rögzítője
KZ СИПАТТАМА
SL STAVBA VÝROBKU
1. Ажыратқыш ON/O/R
2. Реверс ON/R
3. Салатын өңдіршек
4. Ет салынатын науа
5. Итергіш
6. Металлдық шнек
7. Пышақ
8. Ұсақ тесікшелі тор
9. Орта тесікшелі тор
10. Шарбақ ірі тесіктермен
11. “КУББЕ” саптамасы
12. Үй шұжығын дайындауға арналған саптама
13. Айналмалы гайка
14. Электр қозғалтқышы корпусы
15. Ет тартқыш алмалы-салмалы блогінің бекіткіші
1. Vypínač ON/O/R
2. Prepínač ON/R
3. Násypné hrdlo
4. Násypná nádoba
5. Posunovač
6. Kovový šnek
7. Nôž
8. Mriežka s malými otvormi
9. Mriežka so strednými otvormi
10. Mriežka s veľkými otvormi
11. Nástavec «KUBBE»
12. Nástavec na spracúvanie domácej salámy
13. Kruhová matica
14. Teleso elektrického motora
15. Záslepka jednotka mlynčeka
~220- 240V / 50 Hz
1.96 A
Класс защиты II
W/ Max. power 2000
Макс. мощность
2000 Ватт
4.2 / 4.43kg
mm
335
180
2 95
IM013
www.scarlett.ru SC- MG45S41
4
8
9
10
11
IM013
www.scarlett.ru SC- MG45S41
5
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
• Before switching on the appliance for the first time
please check if the technical specifications indicated
on the unit correspond to the mains parameters.
• For home use only. Do not use for industrial
purposes. Do not use the appliance for any other
purposes than described in this instruction manual.
• Do not use outdoors.
• Do not disassemble the appliance when it is
plugged to the power supply. Always unplug the
appliance from the power supply before cleaning
and when not in use.
• To prevent risk of electric shock and fire, do not
immerse the appliance in water or any other liquids.
If it has happened, unplug it immediately and check
in service center.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliances by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• Do not leave the appliance switched on when not in
use.
• Do not use other attachments than those supplied.
• Do not operate after malfunction or cord damage.
• Do not attempt to repair, adjust or replace parts in
the appliance. Check and repair the malfunctioning
appliance in the nearest service center only.
• Keep the cord away from sharp edges and hot surfaces.
• Do not pull, twist, or wrap the power cord around the
appliance.
• Do not place the appliance near gas or electric oven
or store at heated surface.
• Avoid contacting with moving parts.
• The blades are very sharp, so handle them with care.
• Do not push products into the appliance with fingers
while it is in operation. If food becomes lodged in the
feeder tube, use pusher to push it down. If this the
doesn’t work, turn the motor off, unplug unit, and the
then disassemble appliance to remove remainingthe
food.
• When carrying the unit be sure to hold the motor
housing with both hands. Do not carry the unit by the
hopper plate or head.
• Do not fix the cutting blade and cutting plate when
using KUBBE attachment.
• Do not grind hard food such as bones, nuts, ginger
or other products with hard fiber.
• When the circuit breaker activates, do not switch on.
• Do not run meat grinder continuously for the
longer than 10 minutes. Turn the unit off and let it
rest for at least 10 minutes to cool down the motor,
otherwise the motor may be damaged.
• Be sure to turn the appliance off after each use.
Make sure the motor stops completely before
disassembling.
• Do not overload the appliance with products.
• If the product has been temperatures exposed to
below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.
• The manufacturer reserves the right to introduce
minor changes into the product design without prior
notice, unless such changes influence significantly
the product safety, performance, and functions.
BEFORE THE FIRST USE
• Wash all parts (except body) in warm soapy water.
• Before plugging in, ensure the appliance is switched
off.
INSTRUCTION FOR USING
ASSEMBLING(F 1- ig. 7)
• Place the head tightly onto the head inlet.
• Place the snake into the head, long end first, and
turn to feed the screw slightly until it is set into the
motor housing.
• Place the cutting blade onto the snake shaft with the
blade facing the front as illustrated. Place the
desired cutting plate next to the cutting blade, fitting
protrusions in the slots. If it is not fitted properly,
meat will not be ground.
• Screw the fixing ring tightly. Do not overtighten.
• Place the feed tray on the head and fix it into position.
• Locate the unit on a firm surface.
• The air passage at the bottom and the side of the
motor housing should be kept free and not blocked.
PROCESSING MEAT
• Cut the meat into pieces so that they easily fit the
throat.
• Plug the meat grinder in and set the switch to the
ON position, and ON/R switch to the ON position.
• Place the meat on the hopper tray and feed it into
the meat grinder little by little with the pusher.
• After finishing work switch off the meat grinder and
unplug it from outlet.
MAKING KUBBE (FIG.8- 10)
• Kubbe is a traditional Middle Eastern dish. It is
usually prepared of lamb and bulgur minced together
to smooth paste. Paste is formed to hollow tubes,
stuffed with mixture of meat and spices and then
deep- fried.
• Feed the prepared minced meat through the kubbe
maker.
• Cut the resulting tube into cylinders of desired
length.
• Stuff the cylinders with filling and seal the ends.
• - Deep fry kubbe.
MAKING SAUSAGES (FIG.11)
• Put the sausage skin in warm water for 10 minutes.
Then slide the wet skin onto the sausage horn.
• Put the minced meat in the tray. To fill the skin push
the meat into the cutter housing.
• If the skin gets stuck onto the sausage horn, wet it
with some water.
REVERSE MODE
• If the meat grinder is jammed, switch it off and
without unplugging it from the outlet set the switch to
the , 0 position and the ON/R switch to the R
position.
• The feed screw will start rotating in the opposite
direction and push out jammed food.
• If this does not help, unplug the meat grinder from
the outlet disassemble and clean it, .
CLEANING AND MAINTENANCE
DISASSEMBLING
• Switch off the appliance and make sure that the
motor has stopped completely.
Produktspezifikationen
Marke: | Scarlett |
Kategorie: | Fleischwolf |
Modell: | SC-MG45S41 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Scarlett SC-MG45S41 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fleischwolf Scarlett
30 September 2024
18 September 2024
25 August 2024
25 August 2024
25 August 2024
16 August 2024
10 August 2024
7 August 2024
6 August 2024
5 August 2024
Bedienungsanleitung Fleischwolf
- Fleischwolf Sinbo
- Fleischwolf AFK
- Fleischwolf Manta
- Fleischwolf SilverCrest
- Fleischwolf Panasonic
- Fleischwolf Adler
- Fleischwolf Bestron
- Fleischwolf Royal Catering
- Fleischwolf Trisa
- Fleischwolf Bosch
- Fleischwolf Ardes
- Fleischwolf Buffalo
- Fleischwolf Caso
- Fleischwolf Concept
- Fleischwolf Gorenje
- Fleischwolf Jata
- Fleischwolf Klarstein
- Fleischwolf Proficook
- Fleischwolf Unold
- Fleischwolf Gastroback
- Fleischwolf H.Koenig
- Fleischwolf Korona
- Fleischwolf Melissa
- Fleischwolf Steba
- Fleischwolf Taurus
- Fleischwolf Tefal
- Fleischwolf ADE
- Fleischwolf Mesko
- Fleischwolf Amica
- Fleischwolf BEKO
- Fleischwolf Braun
- Fleischwolf Cuisinart
- Fleischwolf Eldom
- Fleischwolf Eta
- Fleischwolf Fritel
- Fleischwolf Kenwood
- Fleischwolf Krups
- Fleischwolf Maestro
- Fleischwolf Moulinex
- Fleischwolf Prime3
- Fleischwolf Hyundai
- Fleischwolf Livoo
- Fleischwolf United Office
- Fleischwolf Beem
- Fleischwolf Lümme
- Fleischwolf Sencor
- Fleischwolf Maxwell
- Fleischwolf Ariete
- Fleischwolf Rotel
- Fleischwolf Ufesa
- Fleischwolf Redmond
- Fleischwolf MPM
- Fleischwolf OBH Nordica
- Fleischwolf Profilo
- Fleischwolf Zelmer
- Fleischwolf RGV
- Fleischwolf Vitek
- Fleischwolf Saturn
- Fleischwolf Eurochef
- Fleischwolf N8WERK
- Fleischwolf Hobart
- Fleischwolf Duronic
- Fleischwolf Magic Chef
- Fleischwolf WestBend
- Fleischwolf Avantco
- Fleischwolf Globe
- Fleischwolf Zeegma
- Fleischwolf Nesco
- Fleischwolf Pro-Cut
- Fleischwolf LERAN
- Fleischwolf Weston
- Fleischwolf Reber
- Fleischwolf Fama
- Fleischwolf Browin
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024