Scanstrut Flip Pro Duo SC-MULTI-F2 Bedienungsanleitung

Scanstrut Nicht kategorisiert Flip Pro Duo SC-MULTI-F2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Scanstrut Flip Pro Duo SC-MULTI-F2 (11 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/11
FLIP PRO DUO USB-A & USB-C WITH 12V POWER SOCKET
(SC-MULTI-F2)
04-10-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
90°
TOP
1
Use drilling template to drill x2 Ø32mm
(1 1/4”) holes (see tools required).
3mm (0.11”) Min
25mm (1”) Max
2Feed barrels through the gasket and
holes.
3
4
6
7
REAR INSTALL ONLY
Tighten lock rings onto product until
secure.
FRONT INSTALL ONLY
Push bezel onto the product, make sure the
bezel orientation is correct.
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot
holes.
Connect to 12V supply, ensuring a waterproof
connection. Fuse and select cable diameter
according to input voltage and current for your
specic installation.
** If using a 24V system a voltage converter is
required on the 12V socket only**
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
FRONT INSTALL ONLY
Drill 4 pilot holes for bezel.
5
TOP
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi screwdriver
Silicone
Tool list:
12V Socket & USB
charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws Screw cover
Parts list:
x1 x1
x1 x4
x2
x2
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE INSTALLING.
Technical information:
USB Charger 12V Socket
Input
voltage
12/24V system
10-32V DC
12V system
10-15V DC
Input
current max 6A 10A
Output type
(12V system) (24V system)
12V 10A⎓
USB-A USB-C USB-A USB-C
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
MAX
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
MAX
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
MAX
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
15V 3A, ⎓
20V 3A ⎓
MAX
Standby
draw < 0.1W
Waterproof
rating IPX4 front only lid closed
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
90°
TOP
1
Use drilling template to drill x2 Ø32mm
(1 1/4”) holes (see tools required).
3mm (0.11”) Min
25mm (1”) Max
2Feed barrels through the gasket and
holes.
3
4
6
7
REAR INSTALL ONLY
Tighten lock rings onto product until
secure.
FRONT INSTALL ONLY
Push bezel onto the product, make sure the
bezel orientation is correct.
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot
holes.
Connect to 12V supply, ensuring a waterproof
connection. Fuse and select cable diameter
according to input voltage and current for your
specic installation.
** If using a 24V system a voltage converter is
required on the 12V socket only**
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
FRONT INSTALL ONLY
Drill 4 pilot holes for bezel.
5
TOP
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi screwdriver
Silicone
Tool list:
12V Socket & USB
charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws Screw cover
Parts list:
x1 x1
x1 x4
x2
x2
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE INSTALLING.
Technical information:
USB Charger 12V Socket
Input
voltage
12/24V system
10-32V DC
12V system
10-15V DC
Input
current max 6A 10A
Output type
(12V system) (24V system)
12V 10A⎓
USB-A USB-C USB-A USB-C
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
MAX
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
MAX
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
MAX
5V 3A, ⎓
9V 3A, ⎓
12V 3A ⎓
15V 3A, ⎓
20V 3A ⎓
MAX
Standby
draw < 0.1W
Waterproof
rating IPX4 front only lid closed
FLIP PRO DUO USB-A & USB-C WITH 12V POWER SOCKET
(SC-MULTI-F2)
04-10-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Bezel 107.3mm (4.22”)
Bezel 51mm (2.01”)
80.0mm (3.15”)
44.0mm (1.73”)
92.0mm (3.62”)
38mm (1.5”)
25.0mm (1”)
13.5mm (0.53”)
Ø 32.0mm
(1.26”)
50mm
2”
TOP
Drilling template:
WARNING CHECK SCALE.
WARNING:
This product is to be connected to a 12V DC or 24V
DC battery power source only. The power supply
must be switched off before installation.
An appropriate fuse or circuit breaker must be
used between the battery / power source and this
product. Check for correct polarity of all wiring
before switching the power on.
This product may contain high voltages. Do not
tamper with the product.
This product is NOT approved for use in hazardous/
ammable atmospheres.
DO NOT install in a hazardous/ammable
atmosphere e.g. engine room.
Before drilling any holes, ensure the area behind the
mounting location is clear of wires, fuel and all other
hazardous objects.
Ensure any holes cut will not signicantly weaken the
structure of the mounting surface.
If the product needs to be mounted outside, it must
be mounted in a location safely above the waterline,
where it is not at risk of being submerged.
CAUTION:
The product is specially designed
for charging QC, PD compatible devices and 12v
plug only.
This product does not contain any user serviceable
parts. DO NOT attempt to repair or modify the
product in any way.
When used in high ambient temperature or in direct
sunlight, the product may turn off temporarily, this
is a safety feature of the electronics.
The IP protection rating is only valid if the installation
is carried out correctly according to the instructions
and on a perfectly at, smooth and non-porous
surface.
When choosing a mounting location, avoid areas
exposed to heat radiation devices and areas with
poor ventilation.
WIRING:
Professional electrician installation recommended,
see Technical Information for power requirements.
To achieve max power output, the specied voltage
must be at the charger. Battery performance and
voltage drop needs to be considered for installation.
ENVIRONMENTAL PROTECTION:
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for
recycling advice.
IMPORTANT:
Scanstrut Ltd & Inc. accepts no responsibility for
any injuries or other damages arising from the use of
their products in any circumstances.
WARRANTY:
A 2 year, non-transferrable warranty covers this
Scanstrut product only and not any devices that are
charged by it. No warranty is given for users’ devices
and users expose their devices to hazards, known or
unknown, at their own risk.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Bezel 107.3mm (4.22”)
Bezel 51mm (2.01”)
80.0mm (3.15”)
44.0mm (1.73”)
92.0mm (3.62”)
38mm (1.5”)
25.0mm (1”)
13.5mm (0.53”)
Ø 32.0mm
(1.26”)
50mm
2”
TOP
Drilling template:
WARNING CHECK SCALE.
-
-
-

Produktspezifikationen

Marke: Scanstrut
Kategorie: Nicht kategorisiert
Modell: Flip Pro Duo SC-MULTI-F2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scanstrut Flip Pro Duo SC-MULTI-F2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Scanstrut

Scanstrut

Scanstrut SC-CW-12F Bedienungsanleitung

5 September 2024
Scanstrut

Scanstrut ROKK Tablet Mounting Kit Bedienungsanleitung

2 September 2024
Scanstrut

Scanstrut Flip Pro Plus SC-USB-F4 Bedienungsanleitung

10 Juni 2024
Scanstrut

Scanstrut DS30-S Bedienungsanleitung

10 Juni 2024
Scanstrut

Scanstrut DS-Multi Bedienungsanleitung

10 Juni 2024
Scanstrut

Scanstrut DS-H6-BLK Bedienungsanleitung

10 Juni 2024
Scanstrut

Scanstrut DS-H6 Bedienungsanleitung

10 Juni 2024
Scanstrut

Scanstrut DS30-P Bedienungsanleitung

10 Juni 2024
Scanstrut

Scanstrut DS40-S Bedienungsanleitung

10 Juni 2024
Scanstrut

Scanstrut DS30-P-BLK Bedienungsanleitung

10 Juni 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024