Sathero SH-200 plus Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sathero SH-200 plus (6 Seiten) in der Kategorie Satellit. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
USER'S MANUAL
Digital satellite Meter
SH-200+
We operate a policy of technically change without prior notice,
the picture of outlook and color is for a reference only, the actual item is the
standard.
No. Item Description
FRONT PANEL
11
12
USB-Port
Signal-LEDs
LCD-Display
22K/13V/18V-LEDs
LOCK-LED
Test-LED
LNB-IN
Test-Port
POWER-button
POWER-LED
Scan-button
Navigation-cross
OK button
USB port for PC connection and power supply connection
Shows the satellite signal quality, the more lights, the
stronger quality
Display the menu and the measured values
LED lights when 22K/13V/18V switch on
LED lights when satellite signal is locked
LED lights when the cable being tested is well connected
and input voltage suited
Satellite signal input
Being tested cable input
Switch finder on/off
Operation:
Red: the finder is on
Off: the finder is off
Charging:
Green: The battery is being charged
Orange: The battery is full
Scan the channels and save
Navigation through menus,
switching programs ▲, ▼
Volume control ◄, ►
OK button: confirmation of a selection
1
2
3
4
5
6
7
8
9
10
INSTRUCTION
Charging:
If the finder is being used for the first time, it may be necessary to charge for
about 12 hours. If the battery runs low during use, you should recharge it for 5
to 6 hours，it will be full until the power light turns to orange from green.
Rechargeable Li-on battery lasts approximately 3.5 hours on a full charge.
It may be necessary to turn off the finder while charging. Universal charger
operating on 110vac/60Hz or 220vac/50Hz makes it usable anywhere.
Turn on/off
Press and hold the POWER button for 2 seconds, the finder will display
WELLCOM screen and enter the main menu.
Press and hold the POWER button for 2 seconds again to turn off.
Enter registration code
It's necessary to enter the registration code when you first start-up or restart
after updating the software and parameters. You can find the code item in the
manual and enter it into the finder by pressing the direction buttons,
[◄][►]：move the cursor to choose the location entered, [▲][▼] : choose
numbers or letters. After that, press OK button to confirm.
Registration code is the security and after-sale guarantee, please keep it
safely.
Restore factory setting
From the main screen, press and hold OK button until FactorySet menu
display, chose “Yes” to confirm or “No” to cancel.
After factory resetting, all modified and saved contents will be lost.
Select Satellite
From the main screen, move cursor to SAT Name, Use [◄][►]buttons to
switch between different satellites, select the one you want, press OK button
to view the longitude of satellite.
Select LNB
From the main screen, move cursor to LNB, Use [◄][►] buttons to choose
LNB Type between single and double local oscillator, then move cursor to
next bar, Use [◄][►]buttons to select the default LNB frequency. The LNB
frequency must be the same as on the antenna.
If no default frequency you need, press OK button to edit, you can key in the
LNB frequency by using direction buttons and press OK button in the end.
Produktspezifikationen
| Marke: | Sathero |
| Kategorie: | Satellit |
| Modell: | SH-200 plus |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sathero SH-200 plus benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Satellit Sathero
13 August 2024
Bedienungsanleitung Satellit
- Satellit Telestar
- Satellit Maxview
- Satellit Megasat
- Satellit Alden
- Satellit Reflexion
- Satellit Teleco
- Satellit Travelsat
- Satellit Triax
- Satellit Winegard
Neueste Bedienungsanleitung für -Kategorien-
4 Oktober 2024
25 August 2024
20 August 2024
19 August 2024
19 August 2024
15 August 2024
13 August 2024
12 August 2024
11 August 2024
10 August 2024