Saramonic Vmic Bedienungsanleitung

Saramonic Mikrofon Vmic

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Saramonic Vmic (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

www.saramonic.com

The Saramonic logo is trademark which is registered

and owned by Saramonic International.

A brand of DSQN

Email: info@saramonic.com

2.2 Attach the Vmic to your camera’s or camcorder’s hot shoe. Connect

the supplied audio transmission line from Vmic’s audio output to the MIC

input of the camera or camcorder.

Audio output jack

Headphone output

Battery compartment

2 Set Up Guide

2.1 Install the battery

Lock the battery compartment

Unlock the battery compartment

Insert the AA batteries into place aligning + and - polarity as shown.

Vmic

The Saramonic Vmic is a b oadcast quality condenser microphone r

that provides professional audio with DSLR cameras and camcorders.

1 Product Introduction

1.1 General Introductions

The Vmic is a broadcast quality condenser microphone that provides

professional audio with DSLR cameras and camcorders. The Vmic allows

you to adjust level control (-10dB, 0dB, +20dB), high-pass ﬁlter(150 Hz), and

high-frequency boost(+6dB) to increase intelligibility of dialogue. The

detachable 3.5mm cable connects the Vmic to the audio input of the

camera, while the stereo headphone output allows you to monitor the

incoming audio. The shock mount system provides isolation from

vibration and mechanical noise.

1.2 Highlights

• Super-cardioid polar pattern

• Integrated shock mount system

• High pass ﬁlter (150 Hz)

• High frequency boost (+6dB)

• Three position level control (-10dB, 0dB, +20dB)

• Headphone monitor output

• 1/8’’ audio output jack to camera

• LED power on/low battery indicator

• Wind shield included

• Lightweight all-mental construction

• Powered by two AA batteries

1.3 Product Structure

Three position level control (-10dB, 0dB, +20dB)

LED indicator

Power button

High frequency boost (+6dB)

High-pass ﬁlter (150Hz)

To attenuate signals with frequencies lower than 150 Hz. It can be used

to remove rumble or other low frequency noise while recording.

Integrated shock mount

2.3 Turn on your camera and long press the power button to turn the

Vmic on, the LED indicator will turn green. When the battery power is

low, the LED indicator will turn red.

2.4 Adjust the level control according to your needs.

The -10dB level is ideal for recording loud sound sources, such as live

music, motorsport, or interviews where the subject is very close to

the camera.

The +20dB level boost is designed for use with DSLR cameras,

allowing the user to reduce the camera's preamp level (or mic-input

level), effectively reducing the amount of noise generated by the

camera's comparatively low quality audio circuitry.

2.5 Plug a headphone to the headphone output of the Vmic, then you

can monitor the audio.

We suggest you could do a test recording and playback the audio to

see if it is acceptable.

3. Speciﬁcation

Type Condenser Microphone (Unidirectional)

Polar Pattern Super-cardioid

Frequency Response 35-20kHZ

Sensitivity -40dB +/- 1dB / 0dB=1V/Pa, 1kHz

Signal to Noise Ratio 75dB or more

Output Impedance 200Ohm or less

Power Two AA batteries

Plug Mini-pin plug (3.5mm)

Filter High-pass ﬁlter (150Hz)

Dimensions(L*H*D) 255 x 66 x 80 mm

Net Weight 196g (6.9 oz.)

www.saramonic.com

The Saramonic logo is trademark which is registered

and owned by Saramonic International.

A brand of DSQN

Email: info@saramonic.com

4. Packing List

• One Vmic main unit

• One foam windshield

• One signal transmission line

• User manual

• Warranty card

Frequency Response

Polar Pattern

Vmic

The Saramonic Vmic is a b oadcast quality condenser microphone r

that provides professional audio with DSLR cameras and camcorders.

Produktspezifikationen

Marke:	Saramonic
Kategorie:	Mikrofon
Modell:	Vmic
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Akku-/Batterietechnologie:	Alkali
Energiequelle:	Akku
Typ:	Digitales Kameramikrofon
Geräteschnittstelle:	3,5 mm (1/8")
Mikrofon-Frequenz:	35 - 20000 Hz
Mikrofon-Empfindlichkeit:	40 dB
Mikrofon-Eingangsimpedanz:	200 Ohm
Anzahl unterstützter Akkus/Batterien:	2
Rauschverhältnis (SNR):	75 dB
Kopfhörerausgang:	Ja
Netzteiltyp:	AA
Anzahl enthaltener Produkte:	1 Stück(e)
Mikrofongewicht:	196 g
Abmessungen, metrisch (B x T x H) mit Standfuß:	255 x 66 x 80 mm