Sanyo PLC-ZM5000L Bedienungsanleitung

Sanyo Videostrahl PLC-ZM5000L

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sanyo PLC-ZM5000L (48 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/48

Owner’s Manual

PLC-XT10

Multimedia Projector

MODEL

PLC-XT15

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT

OPERATING AND MAINTENANCE INSTRUCTIONS IN THE

OWNER'S MANUAL WITH THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to

manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other

accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try

the solutions in the “TROUBLESHOOTING” section at the end of this booklet. If the problem still persists, contact the

sales dealer where you purchased the projector or the service center.

TO THE OWNER

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

●This projector produces intense light from the projection lens. Do not stare directly into the lens as possible.

Eye damage could result. Be especially careful that children do not stare directly into the beam.

●Do not use projectors with whiteboards that produce a very bright glare or 'hot spot'. This seems to happen

most on shiny surfaces.

●This projector should be set in the way indicated. If not, it may result in a fire hazard.

●Take appropriate space on the top, sides and rear of the projector

cabinet for allowing air circulation and cooling the projector.

Minimum distance should be taken. If the projector is to be built

into a compartment or similarly enclosed, the minimum distances

must be maintained. Do not cover the ventilation slot on the

projector. Heat build-up can reduce the service life of your

projector, and can also be dangerous.

●Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation

holes.

●Remote Control Unit, supplied to this projector, emits the laser beam as the laser pointer function from Laser

Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate

laser emission). Do not look into Laser Light Window or shine the laser beam on yourself or other people. Eye

damage may result.

●If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

20cm

50cm 50cm 50cm

SIDE and TOP REAR

SAFETY INSTRUCTIONS

All the safety and operating instructions should be read before

the product is operated.

Read all of the instructions given here and retain them for later

use. Unplug this projector from AC power supply before

cleaning. Do not use liquid or aerosol cleaners. Use a damp

cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm,

or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet. This will prevent damage

due to lightning and power line surges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the

manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table.

The projector may fall, causing serious injury to a child or

adult, and serious damage to the projector. Use only with a

cart or stand recommended by the manufacturer, or sold with

the projector. Wall or shelf mounting should follow the

manufacturer's instructions, and should use a mounting kit

approved by the manufacturers.

An appliance and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the appliance and cart

combination to overturn.

Slots and openings in the back and bottom of the cabinet are

provided for ventilation, to insure reliable operation of the

equipment and to protect it from overheating.

The openings should never be covered with cloth or other

materials, and the bottom opening should not be blocked by

placing the projector on a bed, sofa, rug, or other similar

surface. This projector should never be placed near or over a

radiator or heat register.

This projector should not be placed in a built-in installation

such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through

cabinet slots as they may touch dangerous voltage points or

short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the projector.

This projector should be operated only from the type of power

source indicated on the marking label. If you are not sure of

the type of power supplied, consult your authorized dealer or

local power company.

Do not overload wall outlets and extension cords as this can

result in fire or electric shock. Do not allow anything to rest on

the power cord. Do not locate this projector where the cord

may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or

removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service

personnel.

Unplug this projector from wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been

damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer that have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask

the service technician to perform routine safety checks to

determine that the projector is in safe operating condition.

Voor de klanten in Nederland

Bij dit product zijn batterijen

geleverd.

Wanneer deze leeg zijn,

moet u ze niet weggooien

maar inleveren als KCA.

Produktspezifikationen

Marke:	Sanyo
Kategorie:	Videostrahl
Modell:	PLC-ZM5000L
Bildschirmdiagonale:	0.76 "
Eingebaute Lautsprecher:	Nein
WLAN:	Nein
Gewicht:	9662 g
Produktfarbe:	Weiß
Übertragungstechnik:	Kabelgebunden
Platzierung:	Zimmerdecke
AC Eingangsspannung:	100 - 240 V
Anzahl USB 2.0 Anschlüsse:	1
Fernbedienung enthalten:	Ja
Stromverbrauch (Standardbetrieb):	519 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Plug & Play:	Ja
Kontrastverhältnis:	2000:1
Anzahl HDMI-Anschlüsse:	1
Stromverbrauch (Standby):	- W
Geräuschpegel:	29 dB
RS-232 port:	1
Audioeingang (L, R):	1
Unterstützte Grafik-Auflösungen:	1920 x 1200 (WUXGA)
3D:	Nein
DVI Anschluss:	Ja
Lampentyp:	NSH
Full-HD:	Nein
Digitaler Zoom:	49 x
Abmessungen (BxTxH):	498 x 371 x 165 mm
Projektorhelligkeit:	5000 ANSI Lumen
native Auflösung des Projektors:	WUXGA (1920x1200)
Matrix Größe:	0.7 "
Trapezkorrektur, vertikal:	±30 °
Projektionsflächenkapazität:	40 - 400 "
Projektionsabstand:	- m
Anzahl VGA (D-Sub) Anschlüsse:	1
Serielle Schnittstelle:	RS-232
Seitenverhältnis:	16:10
Lebensdauer der Lichtquelle:	3000 h
Lampenleistung:	330 W
Typ der Lichtquelle:	Lampe
Brennweitenbereich:	27 - 45 mm
Anzahl S-Video-Eingänge:	1
Trapezkorrektur, horizontal:	±30 °
Vertikaler Scanbereich:	48 - 100 Hz
Horizontaler Scanbereich:	15 - 100 kHz
Einheitlichkeit:	90 %
Blende (relative Öffnung):	1.7
Matrix typ:	3-Panel (p-Si TFT aktiv)
Punkt-Scan-Frequenz:	162 MHz
Ethernet/LAN:	Ja