Sanus WSSCAM1-B2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sanus WSSCAM1-B2 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1
1 Wall Template
2
1 Wall Plate with Lock
3
1 Knob Assembly
4
3 Anchors
5
3 Screws (#10 x 1-3/4”)
6
3 Cabinet Screws (#10 x 3/4”) A
Sonos® Amp
7
2 Screws (1/4-20 x 3/8”)
8
1 Cable Management Bracket
B
Cables
NOT INCLUDED
INCLUDED IN BOX
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO USE. SAVE THESE INSTRUCTIONS
PARTS AND HARDWARE
NOTE: Not all hardware included in this kit will be used.
6901-602260 00
Slim Wall Mount
WSSCAM1-B2
INSTRUCTION MANUAL
WE’RE HERE TO HELP
If you have any questions along the way, our install experts are standing by to help.
Call us at: US: +31 (0) 495 580 852 1-800-359-5520
UK: AUS: (0) 800 056 2853 +61 (0) 7 3299 7000
Or, email at: / (EU)info@sanus.com sanus.europe@milestone.com
Before getting started, lets make sure this product is perfect for you!
This mount is designed to
support Sonos® Amp™.
CAUTION: To avoid potential personal injuries and property damage:
Check your Sonos® Amp owner’s manual to see if there are any special requirements for mounting your Sonos
® Amp .
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Do not use this product for any purpose not explicitly specified by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
The wall must be capable of supporting five times the weight of the Sonos® Amp and mount combined.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service.
Tools
Needed
Wood Stud or
Cabinet Install
Concrete Install
Awl
Pencil Level Stud Finder
Screwdriver Drill Bit
Electric
Drill Hammer Drill Bit
1/4 in.
(6.5 mm)
Masonry
1/4 in.
(6.5 mm)
1/8 in.
(3 mm)
Wood
Drywall Install
Hammer Drill Bit
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged,
DO NOT return the damaged item to your dealer; contact Sanus. Do not use damaged parts.
: WARNING
CHOKING HAZARD This product contains small items that could be a choking hazard if swallowed.
DIMENSIONS
6 lbs.
(2.72 kg)
Amp Weight Limit
DO NOT EXCEED
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively,Milestone), intend to make this manual accurate and complete.
However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or
obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no
responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Milestone Global Headquarters - 6436 City West Parkway Eden Prairie, MN 55344 USA
©2018 Milestone AV Technologies. All rights reserved. ECHOGEAR is Milestone brand.
ECHOGEAR and the ECHOGEAR logo are trademarks of Milestone. Made in China.
WOOD SURFACES ONLY!
FOR BEST FIT,
D O N OT
OVERTIGHTEN
6901-602260 00
Slide knob onto wall plate
5
A
Attach cables to amp
7
B
1
2
8
8(Optional) Attach the cable management bracket and secure cables into slots
2
2Mount plate to wall or cabinet by pre-drilling holes and inserting proper hardware.
ASSEMBLY AND INSTALLATION STEPS
3
A
4Screw in support knob Push lever toward wall and slide up to lock into place
6
A
1
1Use wall template to mark holes
REMOVING AND ADJUSTMENTS
Loosen screws, level and tightenUnlock and slide amp up
WOOD STUD 1/8 in.(3 mm)
>5
DRYWALL ONLY 1/4 in. (6.5 mm)
>4+5
CONCRETE
1/4 in. (6.5 mm)
Masonry
>4+5
CABINET 1/8 in.(3 mm)
>6MUST BE SCREWED
INTO WOOD ONLY!
Adjust to assure mount is level
3
L
O
O
S
E
N
T
I
G
H
T
E
N
S
L
I
D
E
L
O
O
S
E
N
T
I
G
H
T
E
N
S
L
I
D
E
7
2
c
b
a
2
b
c
a
1 2
a b


Produktspezifikationen

Marke: Sanus
Kategorie: Nicht kategorisiert
Modell: WSSCAM1-B2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sanus WSSCAM1-B2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Sanus

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-