Sanus SOA-EDM1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sanus SOA-EDM1 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
6901-602184 00
OPTION 1:
Mount with Screws OPTION 2: Mount with Command Picture Hanging Strips from 3M®
Align the channel
for plug insertion.
Align the channel
for plug insertion.
TOOL NEEDED (for Option 1 Install)
Phillips Screwdriver
SOA-EDM1 INSTALLATION INSTRUCTION
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
W
ALL side
WAL L side
W
ALL side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
WAL L side
Base Screws (Option 1 Install)
Command
Picture
Hanging Strips
from 3M®
(Option 2 Install)
PARTS INCLUDED
WE’RE HERE TO HELP
Call us at: 800-359-5520
Or, chat at: SANUS.com/chatSO
Our US-based install experts are standing by to help.
Contact us: Weekdays 8-9 CT, Weekends 10:30-7 CT
30 seconds
30 seconds
1 hour
WAL L side
WALL sid e
WAL L s
ide
WALL sid e
WAL L side
WALL sid e
W
ALL si de
WALL sid e
W
ALL si d
e
WALL side
W
ALL si de
WALL sid e
WALL side
WALL sid e
WALL sid e
WALL si de
WALL sid e
WALL si de
WALL sid e
WALL sid e
WALL sid e
W
ALL si de
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL si de
WALL sid e
WALL sid e
W
ALL si de
WALL s ide
WALL sid e
WALL si de
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL si de
WALL s ide
WALL sid e
WALL sid e
Secure the base in place using
the two screws provided.
The screws are designed to
work with wood stud or drywall
only, without anchors. Predrilling
is not necessary.
CAUTION:
Avoid damage to the base.
DO NOT overtighten the screws.
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid e
WALL sid
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
WALL side
Lightly clean both wall and dot mount surfaces with isopropyl alcohol.
DO NOT use household cleaners as they may leave behind residues
which can affect adhesion.
Remove one liner and
press the pair of strips
onto the back of the base.
Separate the strips and
press together until
they click.
Remove the other liner.
Press the base firmly against the surface for 30 seconds.
Remove the base by lifting up at the bottom of the base.
Now press the strip on the wall for 30 seconds to ensure
adhesive hold.
Wait 1 hour before reattaching the base. Line up
the strips and press until they click.
A D
B E
C F
Milestone Global Headquarters • 6436 City West Parkway • Eden Prairie, MN 55344 USA
Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this
product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or su ciency of the information contained in this document.
©2017 Milestone AV Technologies. All rights reserved. SANUS is a division of Milestone. 3M and Command are trademarks of 3M
®.
Well look so good on your Echo
Dot!
At SANUS, we hold our products to the highest of safety and quality standards,
and we proudly stand behind every product we make.
Made in the USA
Show us where
you put your Echo Dot:
# SANUSSpeakerMount
Removing the Echo Dot Base
Hold base firmly,
then “rock the dot
out of the base.
Install the Echo
Dot Into the Base Removing the Echo
Dot from the Base
Align the plug with the channel
Remove the base by lifting up at the bottom.
Grasp the end of the Command Strip and pull
DOWN slowly, until the strip releases from the wall.
DO NOT pull the strip AWAY from the wall.


Produktspezifikationen

Marke: Sanus
Kategorie: Nicht kategorisiert
Modell: SOA-EDM1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sanus SOA-EDM1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Sanus

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-