Sanus NFCDII Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sanus NFCDII (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
Assembly Instructions for Model: NFCDII
Thank you for choosing a Sanus Systems Natural Media Tower. The Model
NFCDII is designed to keep your collection clean and organized by storing up
to 430 CDs or 230 DVDs, all in one convenient location.
If you do not understand these directions, please contact Sanus at 800.359.5520
or www.sanus.com. Check carefully to make sure that there are no missing or
defective parts. Our customer service representatives can quickly assist you
with assembly questions, and missing or damaged parts. Replacement parts
for products purchased through authorized dealers will be shipped directly to
you. Never use defective parts. Improper assembly may cause damage or
serious injury. Do not use this product for any purpose that is not explicitly
speciîš¿ed by Sanus Systems. Sanus Systems can not be liable for damage
or injury caused by incorrect assembly, or incorrect use. Please call Sanus
Systems before returning products to the point of purchase.
Required Tools: Rubber mallet or hammer, phillips screwdriver, and an
adjustable wrench.
Supplied Parts List: (Not to Scale)
NFCDII Top - A
Qty. 1
Glass Shelves - H
Qty. 14
NFCDII Base - B
Qty. 1
Steel Tube - G
Qty. 1
Center Support - E
Qty. 1
Side Panels - F
Qty. 2
NFCDII Back Leg - C
Qty. 1
NFCDII Front Leg - D
Qty. 1
SANUS Name Plate - I
Qty. 1
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 02.28.06 (100011)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Supplied Hardware: (Full Size)
Step 1 - Insert Decorative Face Bolts into Front Leg
Insert the Decorative Face Bolts ( ) into the Front Leg (O D) making sure they are ush with the Front leg. If necessary, the
rubber mallet may be used to lightly tap them into place.
Diagram 1
Cam - J
Qty. 4
Cam Pin - K
Qty. 4
Plastic Dowel - L
Qty. 4
Screw - M
Qty. 4
Allen Bolt - N
Qty. 1
Decorative Face Bolt - O
Qty. 3
Nut - P
Qty. 2
Washer - Q
Qty. 2
Shelf Pin - R
Qty. 56
Allen Screw - S
Qty. 2
Allen Wrench - T
Qty. 1
O
D
Step 2 - Secure Steel Tube to Front Leg
Lay the Front Leg ( ) face down on a soft surface with the threads of the Decorative Face Bolts ( ) facing up; then, place D O
a Washer ( ) over the middle Decorative Face Bolt, and thread the Steel Tube ( ) onto it. Firmly hand tighten the Steel Q G
Tube.
Diagram 2
Step 3 - Secure Front Leg to NFCDII Base
Attach the Front Leg ( ) to the NFCDII Base ( ) by inserting the two outer Decorative Face Bolts ( ) through the two D B O
holes of the NCFDII Base and securing with two Nuts (P). Use the adjustable wrench to îš¿rmly tighten the two Nuts.
Diagram 3
G
D
Q
D
B
O
P
P
O


Produktspezifikationen

Marke: Sanus
Kategorie: Nicht kategorisiert
Modell: NFCDII

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sanus NFCDII benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Sanus

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-